Jump to content
SAU Community

Max Power Of A Bosch 044?

yogibear

By yogibear,
in Engines & Forced Induction

 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted

Yeah have had a few make that much on a single 044. The fuel pump isn't the only piece in the puzzle though. Make sure you go slightly overkill on the injectors and make sure the tuner knows what he's doing. I recommend EFI Performance for tuning. Sean there is a tuning god second to none

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

hmmm... i have a nismo intank pump in my car at the moment and i'm making 285rwkw pulp and 325rwkw on e85...

injuectors are nismo 555cc

i have an 044 and surge tank setup in my ke70 that i'm stripping and was thinking of moving it to the 33... would this flow enough?

Harey Veteran

Harey

Posted
Posted

Lots of factors, the lower pressure the pump is pushing against the more it can flow. Bosch and other fuel pump manufacturers have charts of this. Ways to lower fuel pressure, ensure your injectors are large enough so the fuel pressure doesnt need to be raised, run lower boost pressure etc

The Dan Grand Master

The Dan

Posted
Posted

hmmm... i have a nismo intank pump in my car at the moment and i'm making 285rwkw pulp and 325rwkw on e85...

injuectors are nismo 555cc

i have an 044 and surge tank setup in my ke70 that i'm stripping and was thinking of moving it to the 33... would this flow enough?

The nismo pump flows more than the 044. Not sure. The only way to know for sure is to calculate the fuel usage by knowing how many ms your injectors are open for at their peak value in the tune you have. So basically if you can tell me what the largest ms value is in your tune, then I can tell you how many L/min of fuel you are using.

Your engine will consume more E85 than it will 98 so the pump will have to flow nearly double to achieve the same power.

Harey Veteran

Harey

Posted
Posted

i really wanted first hand opinions not hear say.

seems like theirs a lot of hear say in here :(

As has been said in many of the posts there are a lot of different factors.

If you want first hand opinions get off your butt and go read the dyno threads for 30+ pages of 'first hand opinions' at least 50% of which will have the 044 fuel pump.

The Dan Grand Master

The Dan

Posted
Posted

As has been said in many of the posts there are a lot of different factors.

If you want first hand opinions get off your butt and go read the dyno threads for 30+ pages of 'first hand opinions' at least 50% of which will have the 044 fuel pump.

Well said

The Dan Grand Master

The Dan

Posted
Posted

i really wanted first hand opinions not hear say.

seems like theirs a lot of hear say in here :(

We build these cars day in and day out. Some make more than others, some where the customer supplies shit injectors or whatever. Every car is different. You are only EVER going to get estimation when it comes to this sort of stuff. If you plan on making more than 450hp at the wheels on 98, consider a better fuel pump like the Pierburg which flows 6.5L/min

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

The nismo pump flows more than the 044. Not sure. The only way to know for sure is to calculate the fuel usage by knowing how many ms your injectors are open for at their peak value in the tune you have. So basically if you can tell me what the largest ms value is in your tune, then I can tell you how many L/min of fuel you are using.

Your engine will consume more E85 than it will 98 so the pump will have to flow nearly double to achieve the same power.

thanx dan... ill check it out

I hear what you're saying...

champagne comedy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...