Jump to content
SAU Community

Recommended Posts

if you do a run with the exhaust dropped and you make more power then you will know the restriction is there... it's a quick and easy way to diagnose a common problem

i'm guessing your cat is collapsed and hindering flow.

you have the parts to make the power you want, just need to get them sorted

if money is really burning a hole in your pocket, go the plazmaman plenum as the stock ones that have been canverted to front facing can lean out no 6. it's not definate, and there are definately 2 schools of thought on the matter that have been hotly debated over the years, but the fact remains that in some instances it has happened, and on that basis i would not run a cut'n'shut plenum on my RB. having said that i do run one on my 4age but that's a 180 deg change, not 90 :)

dont bother with e85 just yet, get the car sorted @ ~340rwkw on pulp and then when you want e85 it'll be a quick and cheap retune... although for this you WILL need much bigger injetors.... think 1000cc

Something is choking it really bad!

Is there a rag in the cooler pipes, blocked/collapsed cat/muffler?

the 426hp run is a lot better.

What do Mercury say about it?

When it was making 426 hp , the car had a couple of illegal mods on it . Like screamer pipe , Atmosphere Bov & Ram pod wasn't boxed in. I got all these mods fixed & made legal . Would this effect performance at all ? Mercury did have a little problem re tuning the car , but nothing which was major & they didn't mentioned anything to me. The only real main problem was the Ecu had to be sent back to Microtech to be cleared , cause the previous tuner put a password on it & we couldn't get it off them. So when it got cleared , they had to start a new tune from scratch . Other then that , all went apparently well & i was really happy with there work on the car. When driving the car home didn't feel any worse , then before i gave it to them , but still really haven't had the chance to really open her up ! They said final results were around the 280 - 290 rwkw.

The only problems with taking the exhaust off & seeing if it runs better , is i live 2 hours south of where Mercury are situated. There is no good local tuners where i live , which are worth taking the car to. So would have to make a 2 hour trip back north to do that ! When i had the car on the hoist the other day did notice the cat & muffler were a bit worst for wear , a bit of scrapings & light dins . The cat especially , also hope there is no rags in the cooler piping , cause they did do a bit of pipe work from the bottom of the turbo which go's to the FMIC. What would u suggest i do about this problem i have ? Take it to a local mechanic for a quick look or exhaust place .

Sounds like you live in ballina or something. Don't worry about the workshop just ask if you can have a couple of runs at the local dyno with the exhaust dropped and see if it makes a difference.

Sounds like you live in ballina or something. Don't worry about the workshop just ask if you can have a couple of runs at the local dyno with the exhaust dropped and see if it makes a difference.

Yeah live at Lismore , do u know this area up this way ? Yeah could try a local dyno around here, i know there is one in Lismore & Ballina . So would just take the exhaust off where the cat bolts upto , then put it on the dyno for a run ?

I lived in tweed heads for 12 years lol. Just unbolt the exhaust at the front pipe (so the cat is unbolted too) and give it a run. Won't hurt anything and will give an indication if what is going on

I lived in tweed heads for 12 years lol. Just unbolt the exhaust at the front pipe (so the cat is unbolted too) and give it a run. Won't hurt anything and will give an indication if what is going on

Thanks for the help , i'll see if i can fit it in before X mas. If not will have to be in the New year . Skyline is only a weekender , so only take it out when i feel the urge to :laugh: Hopefully this will shed a little more light on the situation !

Edited by Tweaky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...