Jump to content
SAU Community

Recommended Posts

What are you wanting them to do ?

I think they are powerless in the situation but if you can give an idea what you expect then maybe they can help you out

i havent read all the posts but dont rely on the moderators help they did nothing for me when i was scrammed as well i didnt even get a reply from either of them they couldnt give a crap bout u my 2c

I usually avoid responding to rude and unappreciative individuals like yourself, but your post above persuaded me to post a reply.

I received a pm from the threadstarter informing me of the issue at hand, and I responded very clearly, advising threadstarter of the best course of action, recommending the matter be reported to the Police immediately, and requesting that the sellers details be provided to moderators so they could be added to the bad trader list. The threadstarter replied with this information, and as promised they will shortly be added to the bad trader listing.

Both myself, and the other FS section mods are growing very tired of people like you, that employ zero common sense or due diligence, and hand over money to internet sellers without doing your homework or taking extra precautions, then proceed to whinge that moderators won't somehow, magically fix the situation to correct your own screw up. We volunteer countless hours of our time running this forum, and repeatedly go out of our way to help out members in any way we can, particularly in less than pleasant situations such as this one where someone has been scammed, and as most members will confirm, we are MORE than happy to help in any way we can. Understand that you as the buyer are the one responsible for taking the required steps to try and ensure a successful and safe transaction with the seller from whom you are purchasing, and having the hide to expect moderators to fully take over and display the rudeness and attitude that you have done when you don't get an immediate response nor the outcome you expected, is frankly, not something we will appreciate or will stand for. We take the security and safety of our members and the trading environment very very seriously and do everything in our power to weed out the scammers and dishonest sellers but we are not miracle workers and as such as the individual undertaking the transaction, the burden of responsibility rests with you.

Now, if you want to discuss your particular matter further, feel free to pm me and I will happily review the situation again, but please, quit it with the cheap shots against moderators otherwise you should expect no help whatsoever.

Cheers.

I just got approached yesterday by someone replying to my WTB post, stating they had the goods I was after and that they were from Townsville.

I did my checking and discovered the phone number was listed on the scammers list. A mate of mine has also heard of a similar scammer operating on the Holden and Ford forums - this individual was also allegedly "dealing" out of Townsville.

I can only stress that you need to understand (and accept) the potential risks with trading over the 'net - especially with purchases interstate where you rely on the seller to be honest and post things on your behalf after you have put the $$ in their account.

To stress - most people are honest.... but you need to be CAREFUL and take as many safety measures as possible - especially if you're spending lots of money!!

This is why I use paypal when I buy my stuff

and how much protection do you think you can get from that? once you have deposited your money it takes less than 7 days for them to get your money out of paypal account, if he does a few of these at once that can add up to a couple of grand, once you have been stuffed around with postage for a couple of weeks that is plenty of time for him to get your money and by the time you lodge a claim his paypal account is empty and you have no chance of getting your money back, he then opens another paypal account and does it all over again.

I got lucky when i bought a wastegate that never arrived, i lodged my claim while he still had money in his account which meansd i got it back.

Sucks that u lost the money man. Guess if it's more than a couple of hundred il from now on try n do more research before putting money in.

Cops are useless and couldnt give 2 turds about it,lets not kid ourselves even though i know there's not much of a choice to go down there anyway.

Just dont hold ur breath.

I like the idea of putting pressure if u can,perhaps chasing every detail u can from the bank or possible friends or whatever back ground they

have. Paypal doesnt mean jack for safety and neither does a bank cheque. My friend got rorted for 27 grand from a perfectly forged bank

cheque that even the bank tellers fell for until hours later. Mean while the guy took his car.

Nothing is full proof on these forums especially with 2nd hand goods sold by us members. Theres got to be a little trust n risk otherwise dont

buy anything at all. Good luck dude.

I just got approached yesterday by someone replying to my WTB post, stating they had the goods I was after and that they were from Townsville.

I did my checking and discovered the phone number was listed on the scammers list. A mate of mine has also heard of a similar scammer operating on the Holden and Ford forums - this individual was also allegedly "dealing" out of Townsville.

I can only stress that you need to understand (and accept) the potential risks with trading over the 'net - especially with purchases interstate where you rely on the seller to be honest and post things on your behalf after you have put the $ in their account.

To stress - most people are honest.... but you need to be CAREFUL and take as many safety measures as possible - especially if you're spending lots of money!!

That guy got me... Let me guess Ho Young?

PAYPAL HAS INSURANCE BUT DOESNT IT...

Not when I went through them, they even stated that if there was no money in his account then I would get nothing back till there was money in there.

and how much protection do you think you can get from that? once you have deposited your money it takes less than 7 days for them to get your money out of paypal account, if he does a few of these at once that can add up to a couple of grand, once you have been stuffed around with postage for a couple of weeks that is plenty of time for him to get your money and by the time you lodge a claim his paypal account is empty and you have no chance of getting your money back, he then opens another paypal account and does it all over again.

I got lucky when i bought a wastegate that never arrived, i lodged my claim while he still had money in his account which meansd i got it back.

Ok well you got me stuffed then.

paypal is a load of crap. the dont offer u any security at all. u can only get money back if its a business ur buying from and that paypals investigation finds in ur favour. i think all u guys whinging about being ripped off need to learn to deal with it. if ur dumb enough to hand over money to a complete stranger, dont moan about it when they walk off with it. there are plenty of secure postage methods and ways of doing business with interstate and overseas buyers and sellers. if ur to stupid to use them dont blame every1 else.

in short, have any of u heard of COD?? use it!

n short, have any of u heard of COD?? use it!

So instead of getting nothing you get a brick, have only used it a couple of times but they don't let you open it before you pay.

And the end of the day its a risk you take and its up to you to decide if its worth it or not.

to blitz i send u a very polite pm about me being scammed all i asked for is the blokes email and to notify other users about the bloke and got no reply .but when i sent u a inquiry about your titanium pipe for sale a week later i got a reply pretty quick mate i dont think i was asking for something that was to hard to get

so thats the story probably be banned for standing up to the moderator now lol

^dude ae you serious?

Hey Blitz, how about you break all Australian privacy laws, risk being put in jail, and paying compensation, and just publish everyone's name address email and IP details on the front page of the forums.

Fark me, the stupidity in here actually hurts my head.

Stop farken blaming others for your mistakes and take some responsibility.

TIP OF THE DAY -

If you don't want to get scammed and want 100% fool proof way of purchasing, lift your ar$e up, go to your nearest parts shop and buy what you need.

^dude ae you serious?

Hey Blitz, how about you break all Australian privacy laws, risk being put in jail, and paying compensation, and just publish everyone's name address email and IP details on the front page of the forums.

Fark me, the stupidity in here actually hurts my head.

Stop farken blaming others for your mistakes and take some responsibility.

TIP OF THE DAY -

If you don't want to get scammed and want 100% fool proof way of purchasing, lift your ar$e up, go to your nearest parts shop and buy what you need.

Amen

/End Thread

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...