Jump to content
SAU Community

Recommended Posts

Hi Guys,

Knew here and have been offered a R33 GTR Vspec and wanted to know what is worth and with these sort of mods how far can it be pushed. I dont know the full spec's as yet as i have to speak to workshop who done the mods but this is what i know..........

- Forged pistons and rods

- Cams and other head work

- Bigger turbo's which are Garrett and come on boost at 3800rpm, dont know which Garrett's they are as yet

- Apexi fc

- Bigger injectors

- 20inch rims

The car has made 366kw on 20psi at all 4 tyres and this thing moves and sounds great and body is immaculate as had recent respray and interior is good just a couple things to tidy up.

Whats the going price for something with these sort of mods???

All advise is appreciated

Cheers

Michael

NRB26

Thanks for the prompt reply

not sure on year model but will find out

What sort of Garrett turbo model would this be??? it starts boosting at 3800rpm and pulls hard all the way to 9500rpm easily

Has new brake rotors and pads all round

Stock suspension

Engine has about 30,000 kms but will confirm and everything used in engine and around was all knew and done about 3.5 yrs ago

Last time i went in it he dumped it in 1st gear and spun all 4 tyres pretty hard and when grabbed traction it took off like a rocket

thanks for the info and ill look into them tomorrow................

One thing i noticed since he had the car that it ran rich when it came on boost so if my brother and i go ahead with purchase we will get it retuned and serviced.

Being forged pistons and rods we can probably push more boost through it and make abit more hp???

IMO totally depends on who did the motor build, how long ago, cars overall condition etc.

I mean it might "look" fine, but then take it to a panel beater that knows skylines for some underside measurements and you might find it was in a hit @ one point etc.

Its hard to say with such little information.

thanks for the info and ill look into them tomorrow................ One thing i noticed since he had the car that it ran rich when it came on boost so if my brother and i go ahead with purchase we will get it retuned and serviced. Being forged pistons and rods we can probably push more boost through it and make abit more hp???
Do you really need more power? 366 atwkw is a fair amount. As long as the AFR's aren't too rich it shouldn't be to much of a problem. Edited by Shazza24

R31Nismoid

Body is great and the recent respray was done by the owner who has been panel beater/spray painter for about 15yrs and his workmanship is great and he also planned on keeping it so why wouldnt he do a good job???

He took the engine and box out and done the engine bay as well and took about 3 months working every weekend on it, it was originally white and now purple which is abit lighter than factory midnight purple........

Reason why im interested in it as we know the full history and person who imported the car which is a mate of my brother. This bloke been importing and modding GTR's for years now and done all work through a well known workshop and has come at the right price, so if i didnt know anything about it and the right price i would not bother as it hasent crossed my mind to buy a GTR at this stage...............

I was actually looking for a cortina/ capri with a cleveland or windsor, mini tubbed and caged, but if something good comes up u buy it right?????

Thanks for the advice guys and keep it coming

R31Nismoid

Thanks for your advice and concern and i do agree on getting in checked but as my brother and myself have known these guys for about 20 years there isent a need to as there honest and so is the car, hence why were interested and we have only bought performance cars through mates.

Upto you dude - I've seen "mates" that I've known for 10yrs suddenly go rogue and screw over everyone inside of a 12 month period and disappear overseas. I even lived with the bloke for 4yrs... Sometimes you just never know mate :)

Always get a separate inspection is a very good rule for any vehicle be it a standard camry or high performance/highly modified.

Anyone that gets upset at such a suggestion is obviously upto something as anyone would appreciate it as dropping 25-30k on a highly modded import is as the best of times risky

You said you are going to talk to the technician who has done the mods.

Well, I'd talk to him and check on how the car car was performing before, then after, and how long ago the mods were done as Ash suggested.

Get permission from the owner to bypass confidentiality.

Get the thing up on a hoist > check everything including rust.

Then...

then...

Take the car to an independent technician of your own choice.

If the owner is hesitating, he knows something you don't.

For all we know, there could be rust (-er, car cancer). For instance, have you obtained the VIN# yet and checked it against "VINS FASTED" thread here on SAU?

A car from Nara probably won't have rust - a car from Sapporo probably will.

It's in the interests of each of the two, to want your business as the new prospective owner - and tell you the truth.

Old Chinese Saying:- You never know how much of a friend your sibling is, until you've been through a "Will" together.

We don't care how great your friends are.

You asked for objective advice > and you're getting it. We have nothing to gain by offering it.

The car? So far, so good. But your journey is not at an end!

It's abit hard to do a inspection myself as the car is in another state so will probably have to make a day trip to check it over with a hoist, but getting a independent inspection is always good and would be the first thing i do before i make a day trip. I'll keep you guyz in the loop on how i go as were off to see a cortina tomorrow and keen on getting something soon.................

Another question is i have in the back on my mind is R33 Vspec GTR's hard to sell as eventually it will be sold, to move onto other projects and thought there hard to sell due to price or people not wanting them much??? any expierence please chime in..........

Edited by mickyyyy

Another question is i have in the back on my mind is R33 Vspec GTR's hard to sell as eventually it will be sold, to move onto other projects and thought they're hard to sell due to price or people not wanting them much??? any expierence please chime in..........

God_speed member of SAU.NSW sold his R33 GT-R yesterday. It didn't even have to hit "carsales" advertising, as it sold through word-of-mouth right here on SAU f/s section.

I helped him deliver it, because it wasn't insured (by the new owner) till to-day > I remarked, "That new owner now has a car that won't depreciate very much at all in the forseeable future".

Another SAUer bidded for this car too.

2-3 years ago, R33 GT-Rs dropped in value whilst there were also many GTS-ts on the road. Now there are less good ones of both > increase in demand for good specimens.

Terry_GT-R34

Thanks for the feedback and another question

It was originally white and now been resprayed in purple which is abit lighter than midnight purple and engine bay, door jams have been painted and looks great. would this affect resale as its not original midnight purple colour???

Terry_GT-R34

Thanks for the feedback and another question

It was originally white and now been resprayed in purple which is abit lighter than midnight purple and engine bay, door jams have been painted and looks great. would this affect resale as its not original midnight purple colour???

I don't think it will - and I don't think it should.

So long as the paint is not just covering up rust, the new colour is simply a personal and subjective thing.

Traditionalists may prefer the colour to be an original Nissan colour. Hard core traditionalists would never repaint a car unless it was the original paint.

But then, white cars can get awfully dirty looking in the engine bay, which prompts the owner to want to go to the expense of changing the colour. There's no reason why it shouldn't be done. Besides, "white" brings lower prices in Japan. For many centuries, Asian countries and cultures used "white" as a funeral colour > there may be a carry over from then.

Has the car been painted throughout the shell?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...