Jump to content
SAU Community

Recommended Posts

Hey guys just got a problem with my R33 the auto box it doesn't shift into 4th gear just keeps in third e.g high way driving to get to 100km/h it revs to 4.5k is there some plug that may have come loose or something in the engine bay or the any help would be great

Cheers

CHi

Link to comment
https://www.sau.com.au/forums/topic/348892-automatic-r33-box-problems/
Share on other sites

there are a set of 4 looms at the front of the engine bay, under the battery. disconnect all 4, clean them with contact cleaner and try close up the wire clamp things inside the looms so they close tighter when you plug them back in. you'll know what im taking about when you see them.

that should fix your problem.

ok security the battery is in the boot for the R33 mmmmm and also when over drive is engaged nothing happens even when it is disengaged? like it doesn't shift to third or fourth it stays in second ? so is there any plugs etc i have to check?

Cheers

Chi

Hey security i've already sprayed contact cleaner and made sure the connections are tighter at those four plugs/loom but still nothing :/ but however i found two plugs at the front near the head lights/radiator which wasn't conencted to anything so any ideas heres a picture of the plugs

post-27271-0-38298300-1294391756_thumb.jpg

cheers

chi

yeah that will happen.

if the oil is low it will create heat as well as drop the oil pressure inside the box. the auto's gear changes relies on the oil pressure.

change your oil and see where that gets you. you may as well drop the sump off and clean the filter as well.

  • 8 years later...

bringing up a pretty old thread here but was curious if this issue ended up getting resolved?

may not be able to get an answer, just noticed half of the members that responded and created the post having been on here for quite a few years.

Edited by bazr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...