Jump to content
SAU Community

Recommended Posts

Hey,

So i bought an R33 Turbo a little while ago. Im a P plater and i just moved to QLD where P platers cant own a turbo car. I dont drive around boosting or do anything dumb. I was at the servo filling up and the cops pulled in next to me. One came over to check my license, no reason why, then he went and popped the hood. Asked if its a turbo (played dumb and said i have no idea, its my first car).

Its got a new K& N pod filter it in, the turbo is not visible at all. the question is- Does a non-turbo R33 still have a pod filter? Can the cops really tell if its a turbo on the spot as its pretty well hidden in the engine and an aluminum plate also blocks the chance of maybe seeing it.

Link to comment
https://www.sau.com.au/forums/topic/348920-p-plate-turbo-r33/
Share on other sites

Hey,

So i bought an R33 Turbo a little while ago. Im a P plater and i just moved to QLD where P platers cant own a turbo car. I dont drive around boosting or do anything dumb. I was at the servo filling up and the cops pulled in next to me. One came over to check my license, no reason why, then he went and popped the hood. Asked if its a turbo (played dumb and said i have no idea, its my first car).

Its got a new K& N pod filter it in, the turbo is not visible at all. the question is- Does a non-turbo R33 still have a pod filter? Can the cops really tell if its a turbo on the spot as its pretty well hidden in the engine and an aluminum plate also blocks the chance of maybe seeing it.

did the cop walk over and just open the bonnet?

neither a turbo or non- turbo come out standard with a pod filter but both of them can be fitted with an aftermarket one, and in NSW at least it is almost always illegal to have one fitted.

the cops dont have to just see the turbo to know its a turbocharged car, it will say it on the vin# plate in ur engine bay, ur car will probly have badges saying its a turbo, and i would think your car should have an intercooler of some sort in it which is a bit of a give away..with the metal plate over the turbo, i assume your talking bout the heatshield over the turbo. this is there to stop heat transferring off ur turbo onto other engine components liek vacuum lines, wires etc. ive never seen a non turbo 33 engine but i wouldnt think it would still have the heat shield there, someone might correct me on that?

so yes most cops, in particular highway patrol will be able to tell if a car is turbo with only a very quick inspection.

if ur allowed to drive a turbo car anyway you have nothing to worry bout, but being on ur p's id be making sure you try and do everything by the book so you can stay out of trouble

good luck mate

Yes the police can tell, a simple registration check will reveal it as a GTS-T. Cop would have to have no idea what he is looking for to not spot a turbo in the engine bay. Pod filters can be put on any engine, there is nothing turbo specific about them. Admitting about lying to police on an Internet forum with specific details is something to avoid!

Be aware that insurance companies know about the car being turbo too, and that driving a turbo car on P plates carries with it more implications than the possibility of a fine from the cops...you're giving insurance a valid reason not to pay out on a claim.

Other than that, safe driving :)

Yes the police can tell, a simple registration check will reveal it as a GTS-T. Cop would have to have no idea what he is looking for to not spot a turbo in the engine bay. Pod filters can be put on any engine, there is nothing turbo specific about them. Admitting about lying to police on an Internet forum with specific details is something to avoid!

Be aware that insurance companies know about the car being turbo too, and that driving a turbo car on P plates carries with it more implications than the possibility of a fine from the cops...you're giving insurance a valid reason not to pay out on a claim.

Other than that, safe driving :)

Birds, although you can put pod filters on any engine i have found some auto's don't like them (idle problems when fitted).

If the cops had any brains they would use wikipedia to understand turbocharging, then inspect exhaust manifolds. Once you know what your looking for, even low mount turbos stand out like dogs balls.

arent the P plate laws country wide now???

if not and your still a P plater from wherever and already had the car and was legal there, then you shouldnt have an issue (other than having an exposed pod filter which cops love picking on for no reason, turbo or not)

With the stock airbox in place DE's & DET's look pretty much identical at a glance. Get a cop who knows what to look for and all it takes is (as has already been mentioned) a look at the exhaust mani for your story to come undone. Get a cop who knows Skylines and (providing you don't have the boot badging) all it takes is a look at your quarter panel GT badges.

I don't know why you would run a pod filter anyway if you're driving a car you aren't allowed as it will just give them a reason to look a little further, chuck the standard airbox back on and it will look heaps less suss.

With the stock airbox in place DE's & DET's look pretty much identical at a glance. Get a cop who knows what to look for and all it takes is (as has already been mentioned) a look at the exhaust mani for your story to come undone. Get a cop who knows Skylines and (providing you don't have the boot badging) all it takes is a look at your quarter panel GT badges.

I don't know why you would run a pod filter anyway if you're driving a car you aren't allowed as it will just give them a reason to look a little further, chuck the standard airbox back on and it will look heaps less suss.

True that and a hell of alot less induction noise! Have also seen the odd GTR with blue/white GT badges instead of red/white.

Edited by Shazza24

Yep that's true some vehicles do have issues with running a pod but people still use them on anything and everything.

Don't know about the rest of OZ but a pod filter is legal in Victoria, covered or uncovered, as long as it is your only intake modification. But two intake mods and you are up for an EPA notice even if you play dumb to the fairest of cops. A front mount counts as a mod, as does an aftermarket BOV, even plumbed back. Also, they are catching on to alot of things down here...some of the police know more about the cars than their drivers. The last one who checked my car popped off the kick panel with a screwdriver to see if I was running an aftermarket ECU. Did not expect that...

The BOV on the crossover pipe should have been a dead give away. The plate will show its a DET motor. The cluster will show the boost gauge. The manifold is different. The obvious redirection of piping from the throttle body.

I wouldn't risk it man. Its a hefty fine. You cant just remove the turbo either. Its not if the car is turbo charged or not, its what the car was registered as. If you have an NA car and bolt on a turbo, its gonna be registered as a NA car and its legal to drive, but if the cop sees the turbo you will be defected and what not.

yeah pods are legal in QLD as long as they are secured with a bracket.

and yes, pods can be fitted to any car.... well actually to and engine. you could put one on a lawn mower if you really wanted to. pretty much no cars come with them fitted as standard though.

as for a cop being able to tell, if they know a bit about cars they won't have any trouble spotting the turbo hanging off the exhaust manifold, whether you have the stock airbox or not.

Don't forget that you are now able to apply for an exemption as a P plater whilst driving a turbo. Check with your transport office to see if you fill the requirements...

This, I don't know how it is where you are but in Vic you can apply for an exemption if it's your work car and your employer specifies you need it (Works out well if you're self employed except you can only technically drive it to and from work related things) or you can get an exemption if it is a 4 door with less than 125kw per tonne.

yeah pods are legal in QLD as long as they are secured with a bracket.

and yes, pods can be fitted to any car.... well actually to and engine. you could put one on a lawn mower if you really wanted to. pretty much no cars come with them fitted as standard though.

as for a cop being able to tell, if they know a bit about cars they won't have any trouble spotting the turbo hanging off the exhaust manifold, whether you have the stock airbox or not.

my DC4 Integra R came with one. but was covered in a stock box, standard crap looking paper filter one, but still a pod lol it was pretty cool

when i got done in my 32 the cop noticed my blitz bov, my boost gauge was illuminated also a trio of boost, oil temp,oil presure, under my cd player and i also had no p plates on lost my licence for 3 months, $500 fine.

since then that 32 was crashed by a friend, so i got a bt1 turbo vl then a supercharged stato and im about to get another 32 but its going in my dads garage until i can legally drive it in a year till then im stuck in a excel lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...