Jump to content
SAU Community

Turbo Setup Advice Rb25/30

tazzy

By tazzy,
in Engines & Forced Induction

 Share

Recommended Posts

tazzy Enthusiast

tazzy

Posted
Posted

Hey guys,

we are working out a turbo setup for rb30/25 set up. initially we were looking at a gt35/40 and after chatting to a friend he is saying to look at a td06 Mitsubishi turbo as an alternative. Problem is we have been browsing eBay for hours and you can't easily tell whats a quality turbo and what is junk. If someone has any advice to offer when looking for a turbo or any good Australian sites to purchase a turbo that will get us somewhere in the 500-600 hp mark at the crank and doesn't carry the HKS or Garrett price tag would be be greatly appreciated. If there are any brands you recommend to buy or stay away from don't hesitate to let us know.

Link to comment
https://www.sau.com.au/forums/topic/349181-turbo-setup-advice-rb2530/
Share on other sites
JKR-32 Proficient

JKR-32

Posted
Posted

There is a thread from simon 32 about a good cheap turbo that he got onto. I think from memory they are called kendo turbos. He has used a t66 with excellent results on a rb25.

It was a fairly recent thread. Should only be a few pages in.

The Mafia Grand Master

The Mafia

Posted
Posted (edited)

Problem is we have been browsing eBay for hours and you can't easily tell whats a quality turbo and what is junk.

This had alarm bells ringing.

How many times do people have to say - EBAY TURBOS ARE f**kING SHIT.

Get a phone book, look up "Turbocharger", or go to www.yellowpages.com.au

here is another place - http://gcg.com.au/

Or Try googling it. There are hundreds of turbo shops around.

Edited by The Mafia
GTScotT Grand Master

GTScotT

Posted
Posted

I will say two things to all of you:

The Kando dynamics/Kinugawa turbos actually seem to be an excellent product, especially when looking at the price. The T67 in question provides results inbetween a 3076 and 35R for response and power, cant go wrong for under $1000 delivered. If it fails it is simply a T3 flange turbo that you can replace with a garrett (yet it has been said research found ZERO reported failures on multiple forums).

The second thing I will say is to OP, while the Kando turbos are excellent etc, please DO NOT be a tight arse.

GL

The Mafia Grand Master

The Mafia

Posted
Posted

I will say two things to all of you:

The Kando dynamics/Kinugawa turbos actually seem to be an excellent product, especially when looking at the price. The T67 in question provides results inbetween a 3076 and 35R for response and power, cant go wrong for under $1000 delivered. If it fails it is simply a T3 flange turbo that you can replace with a garrett (yet it has been said research found ZERO reported failures on multiple forums).

The second thing I will say is to OP, while the Kando turbos are excellent etc, please DO NOT be a tight arse.

GL

You've got my attention.

Ca nyou supply more information? Who makes them? Aussies?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

You've got my attention.

Ca nyou supply more information? Who makes them? Aussies?

No appear to be Taiwanese/Japanese: http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/

People have had good results with these but i don't know how long they have been going. I paid NZ$2100 for a brand new GT3540 and for the extra grand I am quite happy because I only want to do it once. If these Kando turbos had been around for three years or more I might have considered one.

paulr33 Grand Master

paulr33

Posted
Posted

been in al's RB30 with 3076 external and it is absolute nuts, power, response and torque everywhere

form memory he made over 330rwkw and it absolutely flies - send him a pm if you are after exact specs

discopotato03 Grand Master

discopotato03

Posted
Posted

If you want to go cheaper there are T04 and GT series bush bearing turbochargers that could do the job and not be too laggy .

I vaguely remember a hotted up VL having a T04 60-1 turbo and it was tearing up the tar with 10 pounds of boost and a cammed SOHC head . It did have to have an external gate (mount) welded on its exhaust manifold .

Most are going to have lower temp diesel spec turbines and exhaust housings but that and the plain bearing center section are where the cost savings are .

A .

GTScotT Grand Master

GTScotT

Posted
Posted

You've got my attention.

Ca nyou supply more information? Who makes them? Aussies?

I am sure you are aware, yet see this thread:

http://www.skylinesaustralia.com/forums/topic/347726-kando-dynamics-turbo/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...