Jump to content
SAU Community

Diy Log Manifold

Crans

By Crans,
in Engines & Forced Induction

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Yes to all

well that's hardly comparable.

E85 changes the rules somewhat similar to race grade fuels.

You often can make 30-40rwkw extra with the restriction in place.

You result would be close to 300 when you take 40 off for E85, and then 20 for hubs.

You'd hardly then be running 27psi without the fuel too :P

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

So was my 3" exhaust @ 270rwkw/17psi when it was showing an issue/restriction. :)

Drop in race fuel (sunoco 104) and all of a sudden we were @ 370rwkw/24psi with the same exhaust. We could use more timing and boost everywhere.

Just goes to show it's not just about the gas :)

Obviously exhaust and manifold are not the same particular part, but similar issue none the less.

I've seen another car with GT-SS's do the same thing PULP vs Race fuel and a 3" exhaust

Lithium Grand Master

Lithium

Posted
Posted

Thats very very cool, always suspected they should be able to make that kind of power with an un-shy amount of boost - wicked power at 4000rpm too :D

Any plans to get it on a dragstrip or something?

SimonR32 Grand Master

SimonR32

Posted
Posted

Just on a side note... The AMMRR dyno seems to spit out some very kind figures even for a hub dyno!

"Simon-R32" 3076R 0.63 rear is spitting out what would seem impossible hp for the boost level and "wasnt me" with his internal w/g 3076R 0.8 rear is spitting out huge numbers at low revs that also appear impossible...

I'm not trying to start a shit fight in regards to dyno results but I think they might have to be taken with a grain of salt!

wasnt me Collaborator

wasnt me

Posted
Posted

Just on a side note... The AMMRR dyno seems to spit out some very kind figures even for a hub dyno!

"Simon-R32" 3076R 0.63 rear is spitting out what would seem impossible hp for the boost level and "wasnt me" with his internal w/g 3076R 0.8 rear is spitting out huge numbers at low revs that also appear impossible...

I'm not trying to start a shit fight in regards to dyno results but I think they might have to be taken with a grain of salt!

i would agree 100% thats why i said it would make between 350-360 rwkw on a chassis dyno.... ill tell you right now my cars not making 411rwkw lol

SimonR32 Grand Master

SimonR32

Posted
Posted

i would agree 100% thats why i said it would make between 350-360 rwkw on a chassis dyno.... ill tell you right now my cars not making 411rwkw lol

Yeah fair call... STP correction apparently is the highest correction (so maybe get them to turn it off when they print off the graph). Might even try to put correction on my runs to see what it makes haha

To the defense of the guys in Adelaide it's a bit hard to run a mph when they don't have a drag strip (kehehehe)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...