Jump to content
SAU Community

Recommended Posts

Forsale:

full set (front and rear pairs) of DBA 4000 series slotted Rotors for R33 gts-t

they are used, but only have about 1000kms worth of regular street driving (still virtually new)

Part numbers:

DBA4963SR

DBA4963SL

DBA4908SR

DBA4908SL

the rotors have a bit of surface rust, nothing some sand paper or a quick drive shouldnt fix

$600

________________________________________

Project Mu NS Pads - full set

only done 150km of normal street driving (99.9% new)

cost $370 for the full set new

will sell for $270

bump - had tonnes of interstate interest on these, but at this stage i'm not super keen to post, as they are pretty heavy!

Just trying to get my head around your post mate. The Heading says

"Dba 4000 Series Slotted | Project Mu Ns Pads".

Are you selling all 4 discs and pads for $600 bucks or is it just the Discs???.

Cheers

Neil.

Hey, Check out E-Go for really cheap freight, If weight is a problem I just got a full exhaust sent from Adelaide to Melb and we put it as 30kg on a pallet and cost us $40 including insurance. Should be way cheaper to send because there smaller.

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...