Jump to content
SAU Community

Jap Diff Specialist/rebuilder

omy-33

By omy-33,
in Queensland

 Share

Recommended Posts

omy-33 Community Regular

omy-33

Posted
Posted

Hey all.

I am picking up a R33 VLSD this afternoon and am looking at getting it fully rebuilt,

eg, bearings, seals, shim plates, and anything else that needs replacing as i want to eventually put 300kw thru it.

I was just wondering if anyone knew of a diff specialist on the sunshine coast area or northern brisbane area,

if there is no one on the northside i will probably just go to dan at ERD.

Any advice on good workshops would be apprieciated.

thanks Ash.

Link to comment
https://www.sau.com.au/forums/topic/350619-jap-diff-specialistrebuilder/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Diff laping at Kedron has been in the game since Jesus played full back for Jerusalem...

Charlie and the team down there do alot of work with sprint cars, top fuel and monster trucks so they know a few things about holding 8000hp or more...

Didnt know Dan rebuilt diff's?

  • Like 1
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

Doing mine soon Col. Has already done Karen and Marc's. Good results!!!

indeed.

funny watching that car spin both wheels when coming up my driveway (karen driving.)

that diff has been doen VERY well and once I get to that point in my car he's doing it as well.

omy-33 Community Regular

omy-33

Posted
  • Author
Posted

Col do you know if they do gearboxes as well? I swear mine will need to be rebuilt in the next 12 months.

sometimes I think I bought a lemon but considering only one coil pack and the diff has gone it's been pretty reliable seeing as I bought it 3 years ago.

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

they rebuilt my 1973 LJ torana box from scratch, many of the parts had to be made in shop as you cant buy them anymore...

they had to machine a new speedo drive and everything, cost me $700 back in 1999 considering the hours labour I was impressed with the cost...

omy-33 Community Regular

omy-33

Posted
  • Author
Posted

Rev did you have problems with your diff before the re-shim? I ended up picking up H@me's 2nd hand diff and taking it to Dan, I don't think my diff would of survived the drive down to ERD to be honest.

Col I agree with you those costs are impressive, when the synchros get a bit more worn I'll look at rebuilding it, will definitely be getting a quote from Diff Lapping.

thanks for the help everyone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Murray_Calavera
      S1 rb25/s14 starting problem

      By Murray_Calavera · Posted

      Are you 100% sure this isn't tune related?
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • Nightmare_mistress_R33
      No Voltage At Fuel Pump

      By Nightmare_mistress_R33 · Posted

      I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...