Jump to content
SAU Community

Recommended Posts

You can take it to court.

However lets be honest, how many people really are "legal". Very very few.

Please tell me how to take EPA to court i was told i could not

as when my evo i got a EPA at one location and then a police statement of me being involved in a car accident in the same car at the same diff location about 40min drive away and i could still not fight this

Freedom of Information laws.

They allow you to find out where/who it was that reported you. I would imagine then - with a good lawyer, something could be done or some sorta action taken with that information against the individual for making false allegations or along that line.

So like i said, fair amount of effort.

YES you can get a '3rd strike fine'. My mate copped 3 EPAs (none for noise) and yes on the 3rd one he was going to have to pay a ~$600 fine if he was to clear it.

From what I remember the fine was not actually for not complying with emissions; it was a fine for putting stock stuff back on and trying to 'trick' the EPA upon inspection, despite the fact they had photo evidence of the highmount GT30 and External Gate not plumbed in :)

The car is no longer street registered.

And that person would be me lol, the second and third time i got done i recieved a $584 fine, almost $1200 down the drain. Offence: VEHICLE NOT MAINTAINED IN SUCH A WAY THAT EMISSION CONTROL DEVICES OR EQUIPMENT CONTINUE TO OPERATE IN ACCORDANCE WITH THE MANUFACTURER'S DESIGN. I got to know the boys down at EPA after a while lol, nice guys, they actually told me that i should attempt to hide all my mods from the 5-0 and/or throw an RB26 in it!!

Unfortunately if you recieve one of these fines there's no way out of it, even if you de-reg. The police officer that pulled me over last time told me rules are changing and it's going to become harder and harder for us guys to drive around with modded cars, he also stated that these days they have to take pics which they then send off to EPA. So even though i changed everything back to stock they still had photo evidence...

As Mat stated above these were not noise specific tests, they were notices to present vehicle at an EPA station at which they carry out an emissions test and exhaust noise test. If you just get a noise test then your in the clear. If anyone needs any more EPA info I got it all, hahaha, have had some very large discussions with both EPA and the Police.

As Ash said "how many people really are "legal". Very very few." No point fighting if you were in the wrong. Last thing, i was informed by the EPA that if i was to get done one more time they would take me to court, something i really need to avoid.

Did Lou tell you to do a 26? lol... its what i did for the 31 back when... he was shocked i actually went and did it.

As you said, they are good guys at the EPA and if you go down there and leave your attitude at home they can be very insightful ;)

EPA = nice sympathetic people, all but those who write the regulations. Police who go out of their way to enforce EPA regulations = ****s. EPA staffer agreed with me over the phone that my situation was bullshit and the bureaucratic process is silly.

Also, the workshop I cleared mine at said Skylines were the most popular EPA victim. Their books were full of them.

Did Lou tell you to do a 26? lol... its what i did for the 31 back when... he was shocked i actually went and did it.

As you said, they are good guys at the EPA and if you go down there and leave your attitude at home they can be very insightful ;)

He sure did, nice guy Lou, could of chatted with him all day lol

Freedom of Information laws.

They allow you to find out where/who it was that reported you. I would imagine then - with a good lawyer, something could be done or some sorta action taken with that information against the individual for making false allegations or along that line.

So like i said, fair amount of effort.

i brought this up, as i said i have the right to see my accused but nope was told i would not see them maybe i just had a dick head on the phone

Well EPA Suck

To the girlfriends car in for EPA test

Failed due to external waste gate.

Would love to know how a stock s15 sr20 POO has external waste gate guy at shop would not even show me this so called waste gate so dont know what to do

Why would i do that? it a stock car

the dump pipe is stock it does not have a screamer pipe the front pipe is stock

and i know what a screamer pipe looks like got one on r32 and i know what external gate looks like got one on the jzx81

Well EPA Suck

To the girlfriends car in for EPA test

Failed due to external waste gate.

Would love to know how a stock s15 sr20 POO has external waste gate guy at shop would not even show me this so called waste gate so dont know what to do

if you were 100 percent should have argued the point til he showed you i had to bout my injector as he reckoned the were after market and i knew the stock one's were in,where'd ya go werribee or moorabbin?

Werribee as that was local to GF

yeah i called guy today and he said to bring it in again so Saturday it is going back in so i can be shown these so called things

it nothing new though when i had the evo 6 number plate on the side i got fined for that by police ended up removed with a nice note from Mitsubishi saying it was a stock location and a FMIC is stock on a evo

Some people are silly

Yep, I got pulled over by the EPA three weekends ago. They got me for electronic boost controller, exhaust and pod / cooler combo. Took photos of the lot.

Got the official warning in the mail the other day, but the guy said he could have just as easily fined me.

I've learnt my lesson!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...