Jump to content
SAU Community

Problem With My Gtt

illblack

By illblack,
in Victoria

 Share

Recommended Posts

illblack Contributor

illblack

Posted
Posted

Hey guys,

I wasnt sure where to ask this so i thought i would post it up here and see if anyone knew what was going on.

Lately when i start my car somtimes the traction control light, slip light and engine light will all light up and the car wont be running right. it sounds more rumbly at idle and reving and just doesnt feel right, i turn the car back off and start it up again and it will be fine? Not really sure whats going on. Does anyone have any ideas?

Thanks for any help.

Link to comment
https://www.sau.com.au/forums/topic/351375-problem-with-my-gtt/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

get nissan consult or one of the clones and check for error codes from the stock ECU

all of the systems rely on the TPS working and it may be intermittently going out of range

when it does, a number of systems can fail, like the ones you mentioned

i get this on my 33 sometimes, fix is to turn off car, pump accel pedal a few times (open/close throttle body) and restart and its fine

its likely the TPS sensor may be dirty, loose or starting to fail. check consult for real time diag

wanzi Proficient

wanzi

Posted
Posted

Lol I was bout to go n post the very same thing. I was thinking that it was either faulty dash or coilpacks. I thought it was the dash cos when all three light up I find that when i try turning traction on/off the lights all stay on. I also stopped past my mechanic who plugged into my computer n found nothing wrong.

I do find this problem occurs randomly, but used to occur more when low on fuel. However my car has never run rough or anything.

illblack Contributor

illblack

Posted
  • Author
Posted (edited)

Thanks for all the replies guys, It's abit annoying just because i actually only replaced the coilpacks afew weeks ago. I shoulda gotten the splitfires

Edited by illblack

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...