Jump to content
SAU Community

Recommended Posts

i know if i pull something the gtr becomes rear wheel so does that mean i can drift and how good does a gtr drift compare to a silvia because i have all those mods like oil cooler , suspension and roll cage that i dont want to go to waste when changing cars so i hope i can keep my gtr and drift as well

thanks

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/
Share on other sites

pull the 4 wheel drive fuse in the engine bay and youll drift all day and night, and next day amd week after and beter then any silvia, i dont even know why people waste their time drifting in sylvias. :flamed: :wassup:

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/#findComment-703161
Share on other sites

R32 GTRs weigh 1470kg, as opposed to a Silvia which is 1100kg from memory. Whilst the suspension and general design of the chassis of these vehicles is very similar, the Silvia is a much better choice for drifting due to the light weight and easy induced oversteer behaviour. For circuit racing however, its a whole different kettle of fish, when ATTESA is introduced.

This is not to say that you cant use a GTR for drift, it just isnt its ideal use. Much better than a HSV anyday...

R32 GTRs can just have the fuse pulled for slip and slide, not so easy in R33s however.

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/#findComment-705051
Share on other sites

Guest INASNT
32 GTR is just a matter of pulling a fuse or setting up a switch in cabin

33 GTR i am not 100% sure but i think the later ones need the shaft pulled out

In a 32 GTR yes u can pull the fuse to get it into rwd mode, but if u intend to drive all day in rwd mode u need to take the front shaft out otherwise u will burn out the transfer case.

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/#findComment-708487
Share on other sites

r32 takes 2 fuses to get into RWD, 1 under bonnet 1 in cabin... you can also get it into rear wheel drive by turning the car off and then on again while moving.... but as soon as you come to a complete stop the 4WD will re-engage.... by the way when you do both of these you also disable the ABS... :rofl: a fun and happy drifting...

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/#findComment-710771
Share on other sites

Its because the GTRs 4wd ATTESA system is electronically controlled. When the computer senses the rears loose traction it can send up to half the torque to the fronts. If you remove the fuse or install an inline switch etc, it will become rear driven only.

Some1 tell me tho, how hard is drift on a GTRs CVs? Because we all know how cheap our jap parts are...

^ I made that all up. But i think its close... ^

Link to comment
https://www.sau.com.au/forums/topic/35191-gtr-drifting/#findComment-719660
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
    • Looks great, but I'm always concerned that it makes it difficult to see what level the fluids are at. Am I overthinking this?
×
×
  • Create New...