Jump to content
SAU Community

Recommended Posts

Many thanks again Tim & Brian > makes one feel humble.

But when your car Brian, has people sticking their heads and cams out the window :nyaanyaa: , one has to wonder if there's anyone left at home to operate your white 'line - lol

Here's another "eiresgaus-head-out-tha-window-take-tha-risk-o'-decapitation-action-shot" special...

eiresgaus-4.jpg

Many thanks again Tim & Brian > makes one feel humble.

But when your car Brian, has people sticking their heads and cams out the window :nyaanyaa: , one has to wonder if there's anyone left at home to operate your white 'line - lol

Here's another "eiresgaus-head-out-tha-window-take-tha-risk-o'-decapitation-action-shot" special...

eiresgaus-4.jpg

Not to worry, I was home to operate it (most of the time!whistling.gif). All the photo's 'on the move' were by my good ol' passenger, fairly sure for this one I nearly got smacked by the camera while he was trying to get a decent angle! Well worth it though!

what kind of power is god_speeds black r34 making? i was behind it going through the nato park last weekend and seemed to go great

It has HKS cams.

What you noticed Michael is that with "advanced cam timing", there is noticeable low down torque with little loss of top end power.

228awkw on 1.0bar

That thing squirts so strongly from low down.

F-Con V-Pro ECU - still in same state of tune as it was in Japan > hard to find someone to tune it if the car was upgraded.

Terry you coming to the next social cruise on the 19th march?

Thanks for your kind comments Michael. See you there huh? :thumbsup:

Yes - I think both of us will be along.

Matt in his blue Renault Clio Sport > spirited thing

Myself in my silver Forester XT 'n crappy Geolandar tyres (before KU27 replacements)

  • 2 weeks later...
  • 4 weeks later...

Thanks Rhys and Matt.

Just got the car back from Unigroup Eng.

Terry.jpg

The above figure was the final rKw one after boost had been rolled back to 1.4bar with 98RON and -7 turbs.

I wanted boost to come on earlier - bottom end power: but only a little top end power was sacrificed due to Yavuz' superb tuning.

Thanks too to Steve-0 for working with Yavuz and getting Poncams and Tomei cam gears to suit. Cams advanced 3-4 degrees.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...