Jump to content
SAU Community

Recommended Posts

build is lookn good ! was wondering where u got the new dash board and bits and pieces, and rear / side quarter window trim parts from ?? got the same bubbling issue in my 32 gtr unfortunately :(

i mported all of this for him. prices above . these were correct at time of import.

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Not much of an update but i was away from home for 3 months and only just got back last week so after charging the battery and getting the oils flowing where they need to flow again i've started to look into doing some more to it

I had some clear corner lights sitting here for over 7-8 months now and thought it was about time i fitted them up

Newclearrepeaters.jpg

PB220365.jpg

I was surprised at the quality of fitment, they actually fit really well (My panel beater put the passenger side wiring for indicator in wrong place though so it ends up popping the passenger one out a bit but i will fix this in next few weeks as these ones aren't staying in it for too long anyway

Buying new set of N1 Spec headlights for car so will also buy another set of these corner lights but in the smoked series to match in with headlights along with another set of Nismo guard repeaters but this time also smoked

Hopefully will be fitting this Abflug carbon spoiler to front around same time which i think will tie in nicely

ABFLUGCarbonLip.jpg

Getting rubber for new Lenso's in next few weeks as soon as i get my tax cheque back also, so everythings starting to come along now and should be looking good for xmas :)

  • 2 weeks later...

Thought i'd buy myself as well as the car it's 2012 Xmas presents today

Awaiting arrival of -

4 x 265/35/18 Kumho KU39 tyres for the D1R rims

Brand New Genuine N1 Headlights

New Smoked GTR Indicators to match headlights

New Nismo R33/34 GTR Smoked Side Repeaters to match

Set of Perfect Nick GTR Seats with no rips or tears to replace my slightly worn items

and a New GTR Blank Key for a spare

Now just can't wait for it all to arrive and start fitting onto car

Also pricing up new suspension system for it tomorrow, probably consisting Bilstein shocks front & rear, Kings (or something else that's decent) springs, Whiteline stabiliser bars & assorted other products

Pics will go up as all arrives

New tyres have arrived, will see if i get time this week to get them fitted to rims

Was going to buy set of BC coilovers but ended up buying a set of TEIN Superstreet coilovers off a member here so should see in next couple days

coil1.jpg

New lights etc are sitting at Post Office awaiting collection to :yes:

Just finished ordering parts for new suspension, this is what i ended up with

All brand new except for TEINS

TEIN Superstreet coilovers (as above)

CUSCO Front OS Strut Bar 231 540 A

CUSCO Rear OS Strut Bar 231 541 AN

CUSCO Tension Rod Bar 231 485 A

WHITELINE Adjustable Front Stabiliser Bar BNF27Z

WHITELINE Adjustable Rear Stabiliser Bar BNR26XZ

WHITELINE Front Castor Kit KCA332

WHITELINE Front Camber Kit KCA336

WHITELINE Rear Camber Kit KCA347

WHITELINE Rear Subframe Alignment Kit KCA349

Just need to buy new King Pin kits and few other little pieces now and everything will be virtually brand new under there

Currently removing all factory bushes out of spare front uprights i have here and sending them away to be re-powdercoated before getting new components fitted to them

Mate...you should run these to complement your Tein coilovers!! Give me a call to discuss (think I sent you a PM other day with my number)

http://www.skylinesaustralia.com/forums/topic/412108-bnr32-tein-f-r-strut-braces-brand-new-must-see/page__fromsearch__1

Also, where are the under bonnet pics??

Mate...you should run these to complement your Tein coilovers!! Give me a call to discuss (think I sent you a PM other day with my number)

http://www.skylinesa...__fromsearch__1

Also, where are the under bonnet pics??

DAMN i just spent that buying these new Cusco's too

May give you call tomorrow, i'll have think about it but i think the blue on the Cusco will tie into theme of engine bay i have planned

Engine bay is all bog stock standard at moment, engine stuff will be commencing shortly. I wanted to get the suspension, brakes and exterior all sorted before doing the engine so once done it will be all but essentially finished to the way i want it

Also, where are the under bonnet pics??

PC130360.jpg

As mentioned, totally stock under there as i have refrained from buying any go fast bits or bling parts until i had rest of car finished first. Been hard though i tell ya, especially when there was a Trust TD06 twin kit for sale not so long back (really should of bought that and just put in cupboard as now can't find any)

Here's few pics of what's here ready to get fitted, heaps more on the way in post at moment

PC130362.jpg

PC130372.jpg

PC130369.jpg

PC130366.jpg

Edited by whizzn

just an opinion... what if you pulled about the projector lights, and painted the internals black?

seeing as you've got them out, just for a "wonder what it'll look like" thing.

he can't they are the lights off my car..

Where did you score the n1 headlights from with grill clips?

Bought the headlights from Kudos Motorsport, there an online business based on Gold Coast. Bought few things from there now, there great, fast shipping and great communications

http://www.kudosmotorsports.com/catalog/index.php

he can't they are the lights off my car..

The man speaks the truth, i borrowed his lights as one of my other N1's had smashed glass that i havn't got around to replacing yet and come to think of i i have no idea where the other N1 headlight is now either hmmmmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...