Jump to content
SAU Community

Recommended Posts

Ok i have been talking with an Australian Supplier of the 80lb Siemens Deka Injectors (835cc) R33 RB25det other models can be sourced but i will have to ask questions

he said he will drop the price of already quoted

$365 x6 injectors

$11 for harness

$11 for hat << price may fluctuate as i didn't properly hear price and then i got quoted $23 for shipping of a fuel rail and injectors so we will have to work out a new deal but stay tuned

those 3 items will ensure they are plug and play for skylines will just need to ensure you can get to your tuner or get your tuner to install injectors

will confirm all prices this is to get juices flowing

will run this few 3 weeks as of today will place the order on the

18th Feburary 2011

parts coming from Tuff Car Parts Australia

i will ask them about injectors for R32's with RB20's also

will update ASAP will complete price and answer's to any questions asked

ask for bank details

1) Madaz

Link to comment
https://www.sau.com.au/forums/topic/352426-group-buy-siemens-deka-injectors/
Share on other sites

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

using a injector calculator now im not 100% sure if you have to adjust this figure 30% less as they may be calculating on 98ron fuel

Injector size: 840 cc/min injectors(80.0 lbs/hour)

Number of injectors: 6

BSFC: 0.65

Duty cycle: 0.85

This combination will supply fuel for 627 horsepower

626 HP is 467.55 kw

no Probs J-Rad

GoAhead easy done - is that the default GB injector Siemens 80lb - edit oh R34 injectors DONE

yeah and with adjustable fuel pressure reg you could squeeze a little more pressure in to up it to 85lb/h

Good price but you'd want to specify too if they're a) high or low impedance, b) top or side feed and c) spray pattern/nozzle dist

That information might get more people on board.

I myself cannot get those injectors that cheap thru my source, so go for it i says!

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...