Jump to content
SAU Community

Gtr Exhaust Need For Rego

Sinista32

By Sinista32,
in Australian Capital Territory

 Share

Recommended Posts

Trozzle Grand Master

Trozzle

Posted
Posted

If R33's exhaust is teh same, you could try PMing user gtrgsxr - he's got a 33 GTR and it's nice n quiet, I think it's like 2.5" with a huge oval muffler and twin exit.

If he doesn't reply, PM me and I'll harass him myself :P I'm sure he won't mind too much having part of his exhaust stolen for a day

Got a Pulsar Grand Master

Got a Pulsar

Posted
Posted

G'day. I've got a Crapus Exhaust I got for my R33 GTS25t which passed Rego for me.

Have a pic of it in my gallery. Have a look and see if you reckon you could use it.

Cost me $250 so it would be good for some more use to come of it. :cheers:

Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted (edited)

Ooooh do you have her back yet mate?

PS sorry I missed your call yesterday - I am having difficulties in making and receiving calls thanks to Vodafail.

Maybeeee - :thumbsup: You'll have to look pretty far in front of you to know for sure OOsinistaOO :P

Ummm I can help you get every call and every text. Basically it's reverting to the old network rather than 3G - IT WORKS!!!

Menu>tools>settings>phone>network> network mode set to GSM :D

And can you PM me the answer to my Q ?

Edited by Sinista32
GTRKat Grand Master

GTRKat

Posted
Posted

I can but given the time that it was done and the fact that I used somewhere else I don't think it terribly relevant. Best to get your own quotes cause they could be totally different.

And yeah periodically I turn 3G off but I have it predominately for internet purposes so when I'm using that I miss calls and usually forget to turn it back off.

Time to change providers soon.

Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted (edited)

Thanks Kat _ I will get a quote nxt week from tht place. I'll check their work and speak to a couple of recent clients. Been bit a few times and it's made me overly cautious

I cant get a friendly bite ? OOsinistaOO

Edited by Sinista32
Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted

Sorry - Just found out it wont fit/work. Thanks for your offer tho :thumbsup:

G'day. I've got a Crapus Exhaust I got for my R33 GTS25t which passed Rego for me.

Have a pic of it in my gallery. Have a look and see if you reckon you could use it.

Cost me $250 so it would be good for some more use to come of it. :cheers:

Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted

The DB level for a stock GTR R32 is 94db@5100 RPM

The ones I have are rated at

Blitz Nur Rspec - 93db - Reality is Unknown but too LOUD

HKS Super Dragger - 98db - Reality measures 105db @ 3000rpm

EPIC FAIL

They both fail in reality...WTF

JD_R33 Proficient

JD_R33

Posted
Posted (edited)

What if a whole heap of steel wool found it's way deep into your back muffler, and then a bit of mesh fell on top of that to stop it blowing out?

And then after the rego inspection, it all kind of disappeared again?

Edited by JD_R33
Sinista32 Grand Master

Sinista32

Posted
  • Author
Posted (edited)

The blitz nur did the trick with a mid muff :) so all is legal.

Superdrager - meh. Nice note but couldn't cut the rego mustard :(

I went to a hard arse garage so I won't get done for 'bits n bobs' by the constabulary.

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • Dose Pipe Sutututu
      RB25DE NEO with Haltech ECU

      By Dose Pipe Sutututu · Posted

      post up screen shots of your injector tables
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...