Jump to content
SAU Community

Recommended Posts

Hi all.

Sorry to post what must be a very basic question.

I have just recently obtained a set of new tyres. Previously I had 4x 255/35/r18's.

However, when I went to replace them I was advised that smaller tyres are better for handling, in general. The car is a RWD Skyline, so I was advised I'd get far better handling by running something like 235's up front, and 255's at the rear.

I hadn't heard of anything like this before. Is this true? Is it just weight that would make a difference? We'll assume that the rims involved can fit both tyre widths fine, is there actually a disadvantage for running wider front tires on a RWD car?

Again, sorry if there's a lot of people facepalming away at what is a very basic question that I couldn't find any info on, anywhere.

... I was advised that smaller tyres are better for handling, in general.
... so I was advised I'd get far better handling by running something like 235's up front, and 255's at the rear.

These 2 statements contradict each other.

The tyres are there for GRIP. Wider tyres at the rear will, in general, increase the rear grip levels, and that may induce understeer. And, if you are going to fit 2 different size tyres front & rear, then you really should fit 2 different size rims front and rear, because tyres have an optimum rim width which they are designed to fit.

My 2c worth.

Sorry, I should revise and say that smaller tyres at the front

As in reducing size from a 255 to a 235 at the fronts would improve handling of the car in general, and that going larger would actually cause the car to handle worse. This was irrespective of rim size (i.e, with an appropriate rim for whatever tyre size ultimately selected)

Still stands - smaller tyre at the front / larger at the rear means that the rear has more grip, conversely the front has LESS grip. Result - understeer.

Consider the ultimate in tyre size discrepany in a Top Fuel dragster. They have minimal requirements for front grip because they basically don't need to turn corners, so have VERY SMALL front tyres, but have HUGE rear tyres for acceleration grip.

I realise that, which was why I was skeptical. Surely more tyre, more grip?

Unless he was suggesting somewhat of an offset to counter for a skyline's (somewhat) natural desire to ....oversteer? Uh. Would have thought they were more prone to understeer.

I'm just trying to understand why, when presented with a customer who wanted to buy 4x 255's, that he would try and sell them a cheaper tyre (as its smaller) under the premise of providing better handling.

The angle he was going was that it was physically harder to handle the car (i.e, turn the wheel) if you have big fat fronts.

Is this, for lack of a better term - Completely incorrect? Or one of those things thats technically correct but so infintely small an effect as so it wouldn't be there at all?

At carpark speeds you may notice it's slightly heavier, but thats what power steering is for. Highway speeds you won't notice a difference.

He probably tried to sell you the 235's beacause they're cheaper for him to buy, which means more profit when selling.

I'm guessing 235/40/18 to keep close to the same rolling diameter as the rear ?

well there are some reasons that might be true in some cases. but clearly as a general rule, wider tyres in the same compound will grip better.

some reasons smaller may be better:

* you can buy a better tyre for your money. A good 225 will certainly grip better than a bad 255

* tyre is too wide for the rim - 255 is too wide for an 8" rim but 225 is not

* wet and loose/gravel grip can be better with a narrow tyre because it cuts through the water/dirt to a better surface below.

but generally, a wider tyre grips better because each bit of rubber has longer off the road.

a wider tyre does NOT result in more rubber touching the road. the amount of rubber touching the road is the same for any tyre size for the same weight of car and same tyre pressure, it is just the shape of the rubber in the road that changes.

Thats more or less what I was thinking, the car had 255's all round before on Potenza RE050A's. He recommended I go smaller. I just found it odd. In the future I'm happy to go back to a 255 profile for better grip. I wasnt exactly being stingy, the tyres he ended up selling me (which grip well, at least atm for what the car is, I can't complain, though I don't notice the steering to be noticably better) were considerably cheaper than the ones I walked in and attempted to buy.

So as this is odd from a sales point of view, I thought I'd ask the wiser minds here. :P Thanks for the! feedback.

Yep smaller tyres give better handling. Wider tyres give better grip. When it comes to tyres then grip and handling are commonly considered to be inversely related, all other things being equal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...