Jump to content
SAU Community

Recommended Posts

Hi all time to sell my skyline and cheap too ...

Car has almost ran out of rego and it is time to sell her off to the next owner ....

1992 model R32 GTS

R33 GTS-T 4spd Auto with torque converter and stage 2 shift kit fitted ...

RB20DE silver top

R33 GTR brakes front with 5 stud conversion

R33 GTS rear 4 stud brakes (comes with the complete Turbo 5 stud rear upgrade just not fitted )

2 sets of wheels - stock full set of GTST wheels with new kuhmo rubber

set of SSA or something 17" wheels that are 4 stud ... with crappy rubber

2x exhausts come with the car

Fitted now the car has COBY extractors 3" high flow CATCO catalytic converter and 2.5" system (LOUD) and have a 2 1/4" legal exhaust to go with the car ...

Has pedders sportsryder suspension all round , Full polyurethane bush kit all round , pedders rear swaybar , some jap branded strut brace front

Car is in pretty average condition , engine is getting a bit tired , speedo cable needs to be popped back into the back of the cluster as it popped out (brand new cable fitted a month ago) can hear it spinning so the cable is fine just popped out after 1.6km

Has full stereo 2x 12" pioneer subs in boot in custom box , sony headunit etc...

Going cheap needs to go have 4 cars and a motorbike and need to pay back my personal loan pretty quickly ..

Would make a very nice Daily with a RB25DE swap (cheap) or do a full RB25DET swap since it allready has the 25 turbo box in it neways

Car still runs and is driven to work daily ... but you can feel that the motor is getting tired

Has done me for the past 3 years now and need to sell it ...

Paint has faded and could do with a really really good wash and polish to bring it up to spec ... haven't cleaned it in a while

here are a few pics from 2008 ... it now is sporting GTST wheels on front with GTR brakes and R33 GOLD 4 spot calipers

Posting up a few large pics so hope ppls internet isnt too slow

Car has driven me from canberra to Melbourne and to Geelong and back to canberra again so it has been pretty bloody reliable

Contact me Michael or my missus Andrea on 0423486582 or PM me

Cheers Mike

2yud01e.jpg

2wnsc2u.jpg

Link to comment
https://www.sau.com.au/forums/topic/352738-fs-92-r32-gst-skyline/
Share on other sites

Some people will hate me for this.......but. here goes anyway....that would make a great Gen111 V8 manual conversion (motor is tired anyways) , seriously at around 1290kg with a very light all aluminium 5.7 or 6.0 litre V8 and 6 speed box? I would nearly bet that a Gen111 would not weigh any more than a RB20DE engine. Now I am not a big fan of pushrod V8s but with the torque of nearly 6 litres, that would make a real fun package.

If you can just think about a light weight, great handling car with great brakes (GTR), and tons of torque, wow! And its not like a "collectable" (Sorry HR32GTS) Skyline would be sacrificed.

Now time to duck the inevitable flack that this suggestion will draw.

Sure is cheap enough too! Good luck with the sale!

Now back to my Bourbon and Coke to wait for the onslaught.

I should add if someone is really serious about making this into a drift car ....

I have a full wide body kit for it as well ....

BN SPORTS BLISTER KIT FOR R32 .... It's the widest kit that they make ....

50-mm wide front guards and 70-mm wide rear guards the kit is huge ....

Only thing is I am after $1500 FIRM for the bodykit and wont go any lower as it is brand new and never been fitted , by the time you purchase the kit from japan and shipping etc... it is close to $5500

As I said the car would be perfect for a conversion ... the car still runs and I drive it to work when I am not riding my motorbike which has been a lot lately considering the rain

Need to downsize my car collection and pay off a few things so car has to go soon ...

yeah, just tiring to add up the cost of everything else it would need. but i ran out of fingers. :nyaanyaa:

so far i got

-diff

-coilovers, arms etc

-cage

-exhaust

-all the little shit that adds up

what else?

im currently wanting a rego'd track car so i can drive it to workshops, tyre shop motorkhanas etc. the thirtypoo also has has better geometry rear end setup as well.

but its a 32...

Sorry but the car is gonna be sold complete I don't have the time to strip it down ,,,, and also the RB20DE that is in it currently could do with a rebuild (Requires piston compression rings ) due to a lack of compression across the whole engine which is around the 110 psi range on all cylinders ....

It starts and runs fine ... blows no smoke ... (hence only compression rings) just lacks major low end torque but it starts to make power from 4000 rpm to redline which is around 6500 rpm also feels like the ignition timing could be slightly retarded ...

hmmm ... Can't believe there isn't more interest in the car on the forum ....

Cheapest R32 with all the mods done allready (apart from the RB25DET or RB26dett swap)

Ready for the motor transplant ...

No stupid Hicas to worry about cos the GTS doesn't come with it ... so even better setup from factory for drifting ,,,,

well i would buy it if i needed another car at the moment, even have a NEO 25 that will be left over after the rb30 goes into my stagea....... been wanting a 32 for a little while now, coolest skylines by far, after the 31 of course!

but i have no need for it :( which means i would get killed for buying it. which is a real shame, its exactly what i would buy if i was allowed, but 4 cars is enough apparently.

good luck with the sale!

D.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...