Jump to content
SAU Community

Recommended Posts

Hey guys wondering who could help me out running at idle only has 30psi fuel pressure at idle, and only goes upto around 35psi engine off

Has walbro fuel pump running on full 12v from battery

new fuel filter

stock injectors

stock regulator

using a turbosmart fuel guage setup on the line from the filter to the back off the injector rail

R33 gtst rb25det

thanx any help would be great !

Link to comment
https://www.sau.com.au/forums/topic/352837-low-fuel-pressure/
Share on other sites

I think the filter would be on the intake side before the injectors, well thats where i put mine on both our cars, but just check that all the lines are on in the correct order it should go from the fuel pump to filter, then to fuel rail, out of the rail into the fuel regulator, then back to tank. Maybe this could be a problem if the fuel regulator is hooked up back to front.

You need to check fuel rail pressure with the air/boost signal hose disconnected and blocked

Fuel rail pressure is around 2.5bar at zero manifold vacuum. That's about 37-40psi.

If you haven't removed the air/boost signal to the fuel reg, at idle it may be pulling around 20" vacuum or the equivalent of around 10psi.

So with the signal hose connected, you'd only see a fuel pressure of around 27-30 psi.

I think the filter would be on the intake side before the injectors, well thats where i put mine on both our cars, but just check that all the lines are on in the correct order it should go from the fuel pump to filter, then to fuel rail, out of the rail into the fuel regulator, then back to tank. Maybe this could be a problem if the fuel regulator is hooked up back to front.

the incoming fuel is going through the filter into the rail then out the reg to the fuel damp back to the tank thats right isnt it?

You need to check fuel rail pressure with the air/boost signal hose disconnected and blocked

Fuel rail pressure is around 2.5bar at zero manifold vacuum. That's about 37-40psi.

If you haven't removed the air/boost signal to the fuel reg, at idle it may be pulling around 20" vacuum or the equivalent of around 10psi.

So with the signal hose connected, you'd only see a fuel pressure of around 27-30 psi.

disconnected the air hose to the reg and blocked the feed, it went from 29 to 35 psi.

also could try and pinch the fuel return line and if rail pressure increases, then your fpr is stuffed. fuel filter is on the intake line. no good filtering fuel thats already gone through the system

i pinched the return line from the reg and the fuel pressure was rising all the way upto 60 psi if i left it there does this mean my reg is gone?

Low fuel pressure, it is difficult to run the country. If you are worried about the pressure on oil prices, the installation of a Mei Ling M55A is a pump with a high volume pump std spring. When all fails, do a fuel pressure, fuel quantity test, could save you from chasing your tail and throwing good money at the wrong problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...