Jump to content
SAU Community

Recommended Posts

Hi,

So I bought a 2TB Western digital Caviar Green about 2 months ago and today Windows sees that the drive is connected (external USB case) but cant access it. I also tried it on my Linux machine and more or less the same thing happens. Is there any hope of recovering my 1TB of data thats on it? It has my only copies of this years Tokyo Autosalon and a bunch of other stuff on it too. Please feel free to create many and varied insults regarding me not backing stuff up.

Thanks in advance.

How much money you got?

Seriously though if it's not being recognized at all chances are something physical is cooked. Call up a few data retrieval companys and find out what it'll cost ya.

How much money you got?

Seriously though if it's not being recognized at all chances are something physical is cooked. Call up a few data retrieval companys and find out what it'll cost ya.

Sorry I made a mistake in the title of the thread. Windows knows the disk is there but cant access it. When I go into disk manager (Windows 7 starter) it says I need to format the drive and then in the information it says it is a healthy, active, primary partition and has the disk size, it also says it is online. But I cant even do an error check on it cos it has a pop up that says windows cant access it.

Thanks for the reply.

Is it covered by waranty at all?? If you didn't do anything beside use it as instructed, then Western Digital should have a look, free of charge... unless of course, there's stuff on there you don't want anyone to see.

If it is cooked, there are ways to retrieve the data but it costs a lot of $$$$$$. They can basically "re-manufacture" the drive in a similar fashion as if it was on the production line and retrieve undamaged data. Really depends how important the data you lost is.

Have you tried to error check the drive? Bring up Command Prompt and type

chkdsk d: /r

(where d would be your broken HDD letter.)

It'll either fail or succeed. If it fails, next best bet is look at http://www.grc.com/sr/spinrite.htm - Or seek pro advice.

Edited by GTRPowa

Disk Internals NTFS recovery will do it. It scans for directories, files and folders at a sector level and then allows you to extract the data to another drive. They key to recovery is not modifying an already damaged disk, as while its damaged it is still partially readable. Once you go overwriting parts of the disk you cant go backwards again.

Edited by GTRNUR

If it's plugged in via USB, maybe try taking it out of the enclosure and plugging it in directly via SATA.

The different access method may allow the OS more error recovery options.

Other than that, try spinrite etc.

is this the first time that you've used the drive?

i remember a while ago that you had to use WD align for XP oeprating systems. but if you have vista/win7 its not needed.

http://support.wdc.com/product/download.asp?groupid=805&sid=123〈=en

it might not be of much help, but it might be the answer.

Sorry about the day in replying, as suggested by DivHunter I have been trying the tools available found through Google with little success. By doing what I think is the sector level check I can see files. I downloaded the supposedly free Disk Internals NTFS (recommended by GTRNUR) and after 30 hours of running it found the files but it then told me I need a registered version to save them, awesome!! I also have tried a bunch of other programs which havent worked yet. I dont really want to pay for a program which I hope to only ever use once.

Cephas-Thanks for the idea but I dont have a case in the same country as me to plug it into.

EeLey- I checked WDs site and they only recommend recovery companies that will not void your warranty - no offer of data recovery not even software only.

liger-its not the first time I have used it, over a period of 2 months I have transferred 1TB of data on it, some stuff is backed up but my recent photos, Japanese language study stuff, recent document scans and a bunch of other stuff isnt. I formatted it using a Win7 PC and have only ever used it on that and a Linux machine so the XP problem shouldnt affect it.

At the moment I am running minitool power data recovery but I dont have high hopes as it estimated the time for the scan to be 60 hours and yet it seems to be taking a lot longer than that.

What I really want is a program that will just automatically scan and copy the drive (hopefully in one process so it doesnt have to read the 1TB to scan it, then read it again to copy it as that is what takes the time) and quarantine any corrupted files. All while maintaining as close to a bit perfect copy as possible. But any other way of getting my files back would definitely be appreciated.

Any suggestions?

Thanks so much for the replies- as you can see I am following them up and appreciate the time taken to try and help even if they dont work.

Edited by *LOACH*

I've had similar problems as yours but it was from a My Book. Re-plugging usually works as well as restarting the computer. But in your case looks more serious. I'll try to help out. First don't do anything on the computer that has your Caviar Green HD, doing any activity will delete or modify the files you want to recover. Then download and run this (you can use a portable version as well):

http://www.piriform.com/recuva

It will take you probably a day and a half to recover most of your files, some will be lost for good unfortunately

Caviar Green HDs have been known to have problems from their solder points. Here is another thing you can do. Take out the HD, and look at the circuit at the back, carefully unscrew all the bits holding that circuit, take out the circuitry and then clean the inside (the side that attaches to the HD) with a very small amount of rubbing alcohol, I used WD40 for one HD in an emergency and it worked, but I don't recommend it. This is probably one of your last options to do though.

Those are what worked for me when I had to recover files from kaput HDs.

Good luck and keep us posted.

I've had similar problems as yours but it was from a My Book. Re-plugging usually works as well as restarting the computer. But in your case looks more serious. I'll try to help out. First don't do anything on the computer that has your Caviar Green HD, doing any activity will delete or modify the files you want to recover. Then download and run this (you can use a portable version as well):

http://www.piriform.com/recuva

It will take you probably a day and a half to recover most of your files, some will be lost for good unfortunately

Caviar Green HDs have been known to have problems from their solder points. Here is another thing you can do. Take out the HD, and look at the circuit at the back, carefully unscrew all the bits holding that circuit, take out the circuitry and then clean the inside (the side that attaches to the HD) with a very small amount of rubbing alcohol, I used WD40 for one HD in an emergency and it worked, but I don't recommend it. This is probably one of your last options to do though.

Those are what worked for me when I had to recover files from kaput HDs.

Good luck and keep us posted.

Thanks for the reply. At the moment I am still running minitool power data - has been going for 5 days straight and is at 85% done......just seems to be going slower and slower though - might never finish. I might give it the weekend and if it doesn't look like it will finish I will have to try your idea or something else. 1 week with no windows PC to play games on is not fun.....how I survived for a year and a half without one I will never fathom - ahh thats right flash games. More hours playing turret defence games and Travian than it is possible to maintain sanity with - they were dark times. Anyway thanks again.

Loach buy a Mac

and do this to your PC..

mlss_luigi-hammer.jpg

Seriously I just had a problem with 2TB WD external drive which I used only 4 times.

Almost lost 1.8TB of movies and pics but managed to recover it all but a few files corrupted.

WD 2TD is on its way back for a refund.

Seems like theres been a lot of problems with them.

  • Nope 1

Thanks for the reply but if I buy a Mac I will have to use the same technical methodology with my car. Hence my next vehicle would be a Hummer which I would modify by replacing the engine with a Postie bikes donk, spray it babypoo brown, install the drivers seat upside down and facing backwards. I would also have to replace the steering wheel and pedals with a sphincter muscle controlled joystick.

I dont like Macs.

Yeah until now I have had many good experiences with WD drives but these Caviar greens dont seem too good. I bought a Samsung one to put my data on if I can recover it then the Caviar will go back for a refund/replacement.

By the way thanks for latest HKS Day photos in your thread, most appreciated.

LOL @ the suggestion to buy a mac. Bet the salespeople love seeing you walk in with the big SUCKER sticker stuck to your forehead.

First of all, the OP is having a hardware issue, NOT a software / os one.

Secondly, the f**king Imacs have the hard disk buried under the panel and right next to a bunch of hot componentry. I'd be a lot more paranoid about one of those failing than one in an external case or in a pc.

The greens have been a tad problematic, I only use Caviar Blacks in my home box.

DONE!!!!!!!!!! only took a bit over 8 days to scan and then another day or so to copy. Today off to try to explain to the shop including having to say about 4 or 5 times that I dont care about the data on the drive anymore just gimme money or another drive and understanding about 2% of the Japanese that was being said to me. Dont know whats been corrupted but so far a lot seems to have been recovered. Mini power tool data recovery 6.5 did the job although I reckon Disk Internals would have done the same job in about 2 days.

Anyway big thanks to everyone who helped out. Very much appreciated.

Edited by *LOACH*

A good outcome then, most of the recoveries I've attempted dont work at all if they run that long.

For whoever said the hdd manufacturer should look at it - they wont. They'll replace it under warranty easily enough but the warranties state it's not their problem to recover data, and don't cover any loss as a result of disk failure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...