Jump to content
SAU Community

Recommended Posts

Ok guys, gals and others. Noticed yesterday my paint has the distinct appearance of f@ked. Only parked outside one night [wish i hadnt] and rained the next day to wash anything off. Still seems to have clear coat. Does anyone know what can cause this? Do i have an angry neighbour maybe..

Have washed and polished spots. yet to use a cut. so far not a hint of change.

5449776645_0ff667809e.jpg

5449776639_3e57baa55b.jpg

Link to comment
https://www.sau.com.au/forums/topic/354177-damaged-paint-unknown-cause/
Share on other sites

Ah i had this happen to my car aswell, not only did they manage to get the roof, but a bit on the bonnet and boot aswell. We tried washing it and scrubing it a number of times but it never came off. It appeared on the roof when I went to get my new clutch installed..dunno if that helps you at all. To fix it however, i had to respray the roof and bonnet.

Splatter markings seem to indicate that the solution came from directly above (- and not from the side)

Was there a unit balcony above the car?

Yeah thats what it looks like however it was park in open air. My theory is maybe the light shower we had here pooled the chemicals. Just way to many spots to be from an animal. Had a car cover on it in the same spot for a few nights now and not a single mark.

I was however parked in an underground carpark the day before. But that said there was nothing down the sides or anywhere else. not to mention it appeared suddenly. Owell all i can do is fix and hope the aholes choke on their next meal. [preferably undercooked too :P]

^ ^ ^ If it's chlorine from the adjacent pool, or it's thrown around willy-nilly, perhaps this can help.

Sodium Thiosulfate (aka Sodium Thiosulphate) http://www.getridofthings.com/get-rid-of-bleach-stains.htm

However, if the chlorine has already eaten the paint, and you don't want to or can't afford to repaint the panel/roof, get some Red "T-Cut" Polish from K-Mart or Automotive store and you might notice how the colour blends back.

*pokes finger at dan for having such an intricate knowledge of the chemical used in the crime

:P

haha

LOL nothing sinister from my teenage years, I was a paint/coatings chemist for 8 years so have seen lots of different types of surface damage here and there :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...