Jump to content
SAU Community

Recommended Posts

FOR SALE

1992 R32 Skyline

Dark Metallic Grey

Resprayed

RB20DET

5Spd Manual

FMIC

Exhaust

Pod Filter

Coilovers

17inch rims (not rims pictured)

$9500 ONO

0430339305

post-49624-1232088617_thumb.jpg

post-49624-1232088680_thumb.jpg

Edited by SHYGRL
Modified Ohlins suspension from R33 to fit Stagea RS4 S1 or S2

Has bottom eye mount points on all 4 corners. Fit to a Stagea (auto) easy (easy swap to do with jack/hoist).

Replacing Ohlins with different gabwagon adjustable suspension not coilovers.

The Ohlins are in good condition. I won't say excellent. They don't leak, but are fairly filthy with road grime.

$500 (not inc postage) prefer local pickup/meetup

On car:

post-40162-1231932910_thumb.jpg

Theirs are now sold.

Gone to a good home, Cheers Nigel!

GTR front pipes - $150 each this weekend only.

RB26 AFMs - upgraded to D-jetro so not needed and were working perfectly. $100 for the pair this weekend only

Sub Box - fits 2 x 12 inch subs for R32 $80 this weekend only

PM me

post-3189-1232095090_thumb.jpg

post-3189-1232095226_thumb.jpg

post-3189-1232095281_thumb.jpg

rb25 intercooler... its a trust copy... very good, ive ran it on my car for like 8000kms havnt had dramas with it at all... comes with all the pipes, hoses and clamps... etc plug and play lol

$350 ono need it gone.

need it gone!

RB25DET Feb-97 : Inlet + Exhaust stock nissan cam shafts, perfect condition, 100thou old 100% perfect:- $100

Stagea RB25 '97: Exhaust cam gear wheel, stock nissan, as above:- $50

RB25DET turbo dump pipe + front exhaust pipe, stock nissan:- $50

Q45 Throttle Body, 90mm:- $150

pm please if interested, can post

97 R33 Series 2 4 door

metallic silver

Factory manual

ABS

Cold A/C

134000km(genuine)

34 GTR rims (excellent condish with centre caps, no rash)

excellent tyres, Dunllop SportMAXX front 80% tread... Pirelli Dragon rear 70%

Zeal Function Type B coilovers in excellent condition (height and damper adjustable)

3 inch exhaust from turbo back with twin straight pipes out the back

Extreme heavy duty cushion button clutch(3000km old)

Just jap 'Stealth' style FMIC

S2 coupe front bar and lights

Alarm/immobiliser

Never been boosted past 11psi and is making 210rwkw

This is a great car that has been kept in an unmolestered condition. It doesnt attract attention from the 5.0 and is a very comfortable daily or weekender. Looks and pretty much is stock as a rock under the bonnet...

I am a qualified mechanic and maintain service it every 4000km using mobil1 5w50 and genuine nissan filters.

Timing belt and water pump replaced at 123000km, using genuine parts and coolant. Brakes all round were replaced 3000kms ago also.

the car is spotless underneath and has not one leak whatsoever.

$15500 or $13500 with stock wheels

PM or call Isaac on 0433648021

Reduced 93%

1886 x 767 (493.31K)

MORE PICS ON REQUEST, THIS IS ALL I HAVE LOADED ON MY COMPUTER AT THE MOMENT.

Still for sale, possibly interested in swaps depending on what you have ;)

post-46599-1232192575_thumb.jpg FOR SALE OR SWAP BABY ON THE WAY $5300 ono

1978 hz ute fairly straight body no rust in under carriage

has a 253 t-bar auto was recond about 1 year ago also got a bit of chrome in the engine bay

sports exaust and steering wheel

pioneer 6 cd stacker and pioneer head deck with alpine speakers all round

rebuilt carby,new engine mounts,new windscreen

upgraded halogen head lights ,premier front still have old sealed beams if wanted

custom rear tray,tinted windows custom door trims

have 2 spare rims of whats on the car plus a set of 4 magnums aswell

have more spares all round this is a good car is better on petrol than my line sad to see it go make an offer ph:0433745146 for more details cheers

check signature link

NEW RB25 to greddy plenum using stock throttle body adapter kit - $100

q45 90mm throttle body, exc.cond - $150

2x700cc Sard intake manifold + HKS AIC IV additional injector controller, excellent condition, all parts ready to bolt-on & tune - $500

RB25det stock cam shafts - $100

RB25 stock cam gear cover - $50

RB25det stock exhaust cam gear pulley - $50

RB25det stock turbo dump pipe & stock front pipe $50

pm me, all prices are SA pickup

wink.gif

all items are in excellent 100% perfect condition

again, pm me plz for more details

hey guys up for sale now is the r31 s2 i got defected a few months back and i cant be bothered getting it through regency bit over it unfortunately. was a great car but due to the defect lost interest and cant really afford to run 2 cars, also due to lack of space.

List of some parts as follows.

- Full manual conversion, everything u need to do a conversion (no clutch at this stage) $600 ONO i can supply a heavy duty clutch for extra, from my work.

- RB30E engine complete including new engine engine mounts. according to previous owner engine has been reconditioned, unsure of K's on the engine, $380 ONO great engine for a turbo conversion as its out the car, very easy to work on, and u can still drive ya daily.

- Radiator in good condition hardy and fins bent really straight worked really well, includes shroud and any bolts etc that are needed $80 ONO

- Full 2 1/2" exhaust system straight through with a stainless tip looks really neat $200

- Tuned to length extractors 6/3/1 configuration sounds really tough good upgrade for NA,O2 sensor looks relatively new also. i can supply exhaust manifold gasket for extra cheap.brand new. $200 ONO

- Front KYB shockers basically brand new have only been in the car a short time $150 ONO

- Complete mini spooled diff $100 FIRM

- Upper and lover rear trailing arms fitted with brand new polyurethane bushes $150

- Front s13 control arms fitted with brand new polyurethane bushes and good condition ball joints no splits $100

- Front radius rods fitted with polyurethane bushes,not quite as new as the other bushes $50

- White line polished strut brace $160 basically new

- standard Panhard rod with polyurethane bushes $50

- brand new starter motor $100

- Brand new NICE ignition barrel and 2 front door locks and keys $100

- SSR meshes dished 15 " x 7 i think +10 offset they sit just flush with the guards look really nice on the 31 cheap on tires to $700 with 2 extra tires with good tread. polished wheel nuts included also.

- 3" stainless steel De cat pipe $100

- S3 hot plate taillights sold as pair with s3 garnish and boot trim to suit $150

- Sony head unit non Mp3 but its got front AUX in includes cord 1 RCA pre out $50

All other parts and bits and piece also available, what ever u need just ask and i might have it.

NOTE: its got a blue interior.

pics will be added as i have more time or on request, PM me or text message to 0421675373 if any interest would be appreciated.

cheers BEN

As the heading states, i've got a S13 that im no longer needing...

its ready too rock and roll....

Ca

5 speed manual

coilovers (d2 front & tein rear)

mesh rims (17 x 9 +34 & 17 x 9 +? with brand new tyres all round)

front strut brace

aluminium 52mm radiator

ba/au thermo fans

new radiator hoses

20mm spacers on the front

vertex front bar

nismo side skirts

uras rear bar

GTR fmic with custom piping

GTR fuel pump

i've already removed a stack of parts, it does run etc

wont come with most of the parts seen in the pics, seat, cage, bonnet, exhaust etc etc

looking for $5500 but will remove parts to make it cheaper...

Adrian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...