Jump to content
SAU Community

Recommended Posts

that was quick lol 3hours....

seen it there when i picked up the gtr. was in mint condish. would have been worth paying for. even a bottle would have been suficient. now i just got to modify the gtr box so it can be installed into the 31.

if it aint broke dont fix it...

hmmmm my motto.

but im always breakin stuff.

hmmmmm

Gt3540 + Stainless Manifold + 3" Intake + 3.5" Dump Front

good for 350-400rwkw, turbo was bought from ATS( Adelaide Turbo Services) 3 months ago can call Bill to confirm.

$2500

-Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes with Custom Braided turbo feed line, oil restrictor and custom turbo drain, water banjos etc

and 19psi actuator, also included is an hks alloy hard out let elbow to suit. Id CHRA is 706451-24

-Tune length low mount stainless manifold

-3.5" Bellmouth dump front pipe & catless pipe

-3" Silicon with alloy connector intake pipe

post-31991-1262941091_thumb.jpgpost-31991-1262941134_thumb.jpgpost-31991-1262941146_thumb.jpg

post-31991-1262941158_thumb.jpgpost-31991-1262941196_thumb.jpgpost-31991-1262941206_thumb.jpg

Water Methanol Cooling mist setup suit skyline r33 in excellent condition, kit is wired up ready to bolt in

$400

Includes the following:

Modified r33 skyline washer tank (also spare new trunk mount tank)

BLACK 150 psi pump

3 meters high pressure hose

Brass fittings

World class brass checkvave rated at 600 PSI and over 300 F

Injector that installs from the OUTSIDE of the pipe

Injector holder

Relay

Relay Harness

Fuse

Fuse Holder

boost switch adjustable from 1-25 psi.

various electrical connectors

Also comes with new spare tank and fuses/relays

R33 cross over pipe drilled and tapped

post-31991-1262941391_thumb.jpgpost-31991-1262941456_thumb.jpgpost-31991-1262941473_thumb.jpg post-31991-1262941573_thumb.jpg

Sard 850cc side feed injectors rb25det

come in fuel rail with fuel regulator, injector o-rings, collets, injector loom with clips soldered in and modified clips to suit, all bolts straight into rb25det, only 2 months old!

$800

post-31991-1262941652_thumb.jpgpost-31991-1262941669_thumb.jpg

Apexi Power Fc + Hand Controller Suit R33 RB25det

Comes with 310rwkw tune to suit rb25det with, 3.5" exhaust, gt35, z32 afm, sard 850cc injectors

post-31991-1262941808_thumb.jpg

$1300

Edited by FOOLBOOST

Hi guys,

Have the following for sale. Pickup preferred, unless you want to organise postage / courier.

17 inch Tyres + Rims

4 x Yokohama Advan Sport V103 (255/40ZR17 94Y) very good tread $800 (+$1600 new!)

4 x Bridgestone RE55s (255/40R17 94W) a couple of track days left in them $400

4 x Bridgestone RE55s (255/40R17 94W) 60 - 70% tread $800

4 x Dunlop V8 Supercar Slicks (280/680R17) 40% tread $400

4 x R33GTR Rims only with centre caps, reasonable condition a few marks $1100

RB26 Engine bits

Greddy Carbon Engine Cam Valley / Timing Belt Cover $300

R32 GTR Aircon Setup (everything aircon forward of the firewall, excellent working condition prior to removal for weight reduction) $100

Trust MX Front Pipes (goes from dumps to cat) dent in standard spot $250

RB26DETT Plenum / Inlet Manifold / Exhaust Manifold (6 Total) Gaskets Brand New $100

R32 GTR Clutch Slave Cylinder (good condition, upgraded to nismo oversized due to triple plate clutch) $40

2 x AFMs excellent working condition mesh not removed (removed due to D-Jetro) $100

RB26DETT standard dump pipes $50

Jap retuned standard computer (no speed cut, car made 270rwkw with standard engine/ turbos etc and this computer) $300

Misc

Nismo genuine boot spoiler internal damage but should be repairable $50

Earls Oil Stat – installs into oil cooler circuit to thermostatically control oil temp. Dash 10 fittings for easy installation. Also has ports for oil temp and pressure senders. See http://www.earls.co.uk/earls/catalogue/Cooling%20Systems.pdf PART # 501ERL $200

R32 GTR Silk Road Coilovers typical hard jap spring rates $400

Sub Box, fits 2 x 12 inch subs in R32 boot WITH rear strut brace. Made from 16mm MDF, including fittings $50!!!

R32 GTST Type M Driving lights fit in Type M front bar $50

RB25DET Alternator and Aircon Compressor Good condition $50 each

Low Ballers will be ignored, genuine offers considered. First in, best dressed and items not considered sold until payment received or pickup arranged. Get in on some bargains and help de-clutter my garage! Pics to come once the temp goes south of 40degC.....

Cheers,

Andrew

Blue32

Edited by Blue32

FOR SALE:

KTS Adjustable Tie Rod Ends - suits R32, R33, Cefiros and S14 - $100 - like these ones here

pair of R33 GTR standard side mirrors(complete in housing, wiring, mirror etc) in white, fits GTST or GTR - $50

Hi guys,

Have the following for sale. Pickup preferred, unless you want to organise postage / courier.

17 inch Tyres + Rims

4 x Yokohama Advan Sport V103 (255/40ZR17 94Y) very good tread $800 (+$1600 new!)

4 x Bridgestone RE55s (255/40R17 94W) a couple of track days left in them $400

4 x Bridgestone RE55s (255/40R17 94W) 60 - 70% tread $800

4 x Dunlop V8 Supercar Slicks (280/680R17) 40% tread $400

4 x R33GTR Rims only with centre caps, reasonable condition a few marks $1100

RB26 Engine bits

Greddy Carbon Engine Cam Valley / Timing Belt Cover $300

R32 GTR Aircon Setup (everything aircon forward of the firewall, excellent working condition prior to removal for weight reduction) $100

Trust MX Front Pipes (goes from dumps to cat) dent in standard spot $250

RB26DETT Plenum / Inlet Manifold / Exhaust Manifold (6 Total) Gaskets Brand New $40

R32 GTR Clutch Slave Cylinder (good condition, upgraded to nismo oversized due to triple plate clutch) $40

2 x AFMs excellent working condition mesh not removed (removed due to D-Jetro) $100

RB26DETT standard dump pipes $50

Jap retuned standard computer (no speed cut, car made 270rwkw with standard engine/ turbos etc and this computer) $300

Misc

Nismo genuine boot spoiler internal damage but should be repairable $50

Earls Oil Stat – installs into oil cooler circuit to thermostatically control oil temp. Dash 10 fittings for easy installation. Also has ports for oil temp and pressure senders. See http://www.earls.co.uk/earls/catalogue/Cooling%20Systems.pdf PART # 501ERL $200

R32 GTR Silk Road Coilovers typical hard jap spring rates $400

Sub Box, fits 2 x 12 inch subs in R32 boot WITH rear strut brace. Made from 16mm MDF, including fittings $50!!!

R32 GTST Type M Driving lights fit in Type M front bar $50

RB25DET Alternator and Aircon Compressor Good condition $50 each

Low Ballers will be ignored, genuine offers considered. First in, best dressed and items not considered sold until payment received or pickup arranged. Get in on some bargains and help de-clutter my garage! Pics to come once the temp goes south of 40degC.....

Cheers,

Andrew

Blue32

pics added: Click here

NOW SEPARATING KIT

Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes and 19psi actuator Id CHRA is 706451-24

post-31991-1263103026_thumb.jpgpost-31991-1263103040_thumb.jpg

post-31991-1263103048_thumb.jpgpost-31991-1263103065_thumb.jpg

post-31991-1263103082_thumb.jpg

$1600

Custom Braided turbo feed line, oil restrictor and custom turbo drain, and water banjos suit gt30 gt35

post-31991-1263103121_thumb.jpg

$150

Hks alloy hard out let elbow 2”-2.5 outlet” with silicon joiner and clamps to suit gt30 gt35

post-31991-1263103157_thumb.jpg

$120

Tune length low mount stainless manifold suit rb20det rb25det

post-31991-1263103209_thumb.jpg

$300

3.5" Bellmouth dump front pipe suit gt30 gt35

post-31991-1263103269_thumb.jpg

$350

3” catless pipe

$80

3" Silicon with alloy connector intake pipe and clamps suit gt30 gt35

post-31991-1263103303_thumb.jpg

$100

Sparco Bonnet Pins

post-31991-1263103331_thumb.jpg

$40

Billet Coolant Temperature Sensor Adaptor

post-31991-1263103361_thumb.jpg

$30

Car:

PowerFC (R32/33 GTR) + hand controller $850

2x Motul 4l 300V Chrono Oil $75 each

stock 32 GTR turbos $200

stock GTR injectors (new revision) $200

stock 32 GTR cam gears $40

stock 32 GTR harmonic balancer $20

stock 32 GTR dumps $20

Trust oil cooler (150mmx300mm) - use on engine oil at own risk, was in a car that spun a bearing $40

Computer:

4x tressels, white (1.8m x .7m) $50 each or $150 for all 4

1x satelite dish $50

Random:

Poker chips, 500 peice $40

DVD Box set series 1 of WPT $30

Scrubs Box Sets: $50 for all 3 or -

Season 1: $20

Season 2: $20

Season 3: $20

Futurama DVD Box Sets: $50 for all 3 or -

Season 1: $20

Season 2: $20 Unopened

Season 3: $20 Unopened

all i can think of atm.. PM me, all prices are pickup, happy to post at buyers expense

updated some prices, pics and details of pfc are here http://www.skylinesaustralia.com/forums/R3...nd-t303301.html

hey lads i have some wheels i need to sell they are 17 inch, with good tread, plenty of rubber, the fronts are 215/50 and the rears are 235/45, i must sell them i need money, $400 ono, im easy, just let me know cheers 0430 400 138- adam, call anytime, , there are photos in attachments!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...