Jump to content
SAU Community

Recommended Posts

f/s-

i have a 38mm turbosmart wastegate.

fitted with a 7psi spring.

it held 15psi FLAT on my 25 with 3076r.

ONLY upgrading due to getting a craig helps merge collector manifold and HAVING to go 44mm or bigger :ermm:

used for 100km's

$300

up for sale my 32 CBF fixing it

up for sale is my r32,gts 4wd turbo AUTOMATIC.

black in colour

with 146000kms

rb20 DET

3inch cat back exhaust

17inch black r34 gtt rims

tinted windows

very clean body

bad points are little things like a few plastics in the interior are broken

NEEDS r/h side controll arm, front bar and tire to be swapped over as it has a puncture but i have a tire to go on.

and no rego but it can be all you have to do is go to the rego office and pay for it.

price is firm as its CHEAP as CHIPS , no swaps BUT i want a bigger turbo for my 33 so maybe cash a turbo and cash.

text me on 0415232397 located in mansfield pk

pics here...http://nissansilvia.com/forums/index.php?showtopic=463264

4 Sale

R32 ISC Rear camber arms, Brand spanking!

Bought coz they were going to on the track car but decided to take the ones off the streeter instead.

Bought for $179 (+15 bucks postage i think).

Sell for $150

post-47300-1286512024_thumb.jpg

z32 afm setup for 5-pin plug (suit Rb20, early-mid Rb25) still for sale - $100

DSC00940.jpgDSC00941.jpg

I have some sets of Front Brake disc rotors (pairs) for sale:

1x DBA4000 296mm x 30mm 99% new. R32 GTR

unused from project, upgraded to 324mm set

had slight surface moisture rust, sandpapered off as per pic

$100

DSC00989.jpg

1x RDA 280mm x 30mm 90% new. R32 GTst, Stagea S1

had slight surface moisture rust from leaking shed, sandpapered off

$80

1x RDA 280 x 29mm 75% new. Stagea s1, R32 GTsT

$70

1x stagea S1 front brake caliper set, with braided line as pictured, new pads

$50

DSC00991.jpg

need it gone

thanks

FOR SALE:

Carbon bonnet for r34 300$

Blitz LM fmi return flow type r34/33 300$

R34 Nismo/Altia rear bumper, original not fibre glass copy 150$

pm me if your interested!

PM sent for bonnet and FMIC

cheers

for sale

genuine r34 aero front bar 500 neg

fibreglass aero front bar brand new still in gel coat, no pic 150 neg

brand new never been used greddy dual pillar gauge holder for r34 gtt/gtr 120 neg

msg or ring dylan on 0433091947

post-61928-1286534101_thumb.jpg

post-61928-1286534189_thumb.jpg

Bendix Ultimate Pads + Discs To Suit R33 Skyline

Includes:

Front Discs x2

Rear Discs x2

Front Pads x2

Rear Pads x2

Not sure on the true value of these, so if some makes a good offer i will probably take it

These are also listed on ebay at the moment, here's the link to view pics of the dics and pads

http://cgi.ebay.com.au/Complete-Set-Brakes...=item3a5f3a5ae5

The discs have hardly a lip at all on them at all, the front is like not even a 1mm lip i rekon,

And as for the rear discs, they just feel like there is no lip, just where the pad doesn't reach the edge of the disc its a lil rough, which is normal

The pads have 7mm all round front and rear, and they are Bendix Ultimate,

Do not want to post as too heavy being metal, obvious reasons ofcoarse. Would prefer pickup only

Contact me through here or send me an e-mail at [email protected]

Locater in craigmore 5114

r32 standard turbo. Came off the car running stock boost before I did a turbo/injector upgrade. $200.

Set of rb20 injectors $100

rb20 airflow meter $70

prices are neg. I am willing to swap parts for the following things--

Bonnet. Drivers side front guard. Drivers side head light and indicator to suit r32.

Pm for details thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...