Jump to content
SAU Community

Recommended Posts

gotta get rid of these stuff come and take it!

R33 GTR spoiler fibreglass ; $120

R33 GTST Blitz nur spec exhaust ; $250

or the whole lot for $350

photos can be seen

>> click photos

contact ; 0411166292 ask for Peter

Cheers

GTST blitz nur spec exhaust sold!!!!

Trust MX front pipe for RB26DETT.

Dent in the usual spot from a previous owner, was still flowing perfectly. Only replaced due to going to the Greddy dump/ front pipe extension.

Take it away for $100 ono

EDIT: Also have standard 32 GT-R manifolds.

Perfect if you are doing a turbo swap, get these port matched before you start then just swap them over with your old ones!

$100 also

Front pipe is gone!

EOI on my Work Eomtion CR KAI. Black in 18x9.5+12 with 245/40/18 tires that have 90%+ tread on them. Looking at around $2,300ish I guess.

Price drop

1-Full set of Pia rozza rims 5x114.3

Front 17x8+35 with bridgestone er3000 215 45 17 approximately 50% tread

Rears 17x9+38 with crappy 235 45 17 tyres

Being second hand rims they have some gutter rash

$450

2-Pair of SSR Integral A1

5x114.3

16x7+44

no tyres

$80

3-Pair of wantanbe style rims

15x8

5x114.3

with a pair of brand new yokohama 225 50 15

$200

Contact via PM

Attached thumbnail(s)

  • post-63640-0-57241100-1299739174_thumb.jpg
  • post-63640-0-00097700-1299739206_thumb.jpg
  • post-63640-0-07117300-1299739228_thumb.jpg
  • post-63640-0-17599500-1299739254_thumb.jpg
  • post-63640-0-90620000-1299739288_thumb.jpg
  • post-63640-0-94695200-1299739330_thumb.jpg

Hi,

Looking to sell my Wifes 2002 model S15 spec R Silvia SR20 turbo engine. She has owned the car for last 5 years and never had any mechanical problems with it, car runs and drives excellent. engine never been modified. Car is in Excellent condition Motor, paint and body wise, well looked after.

Metallic silver paint

18" 5 spoke wheels

2way pager alarm, Cost $700

Electric sunroof

Automatic trans

Very economical to run.

Unmodified sr20 turbo engine

$12,990

Selling due to new car.

Pm or 0439879828

post-11223-0-63231800-1300601580_thumb.jpg

Fs vr v8 5spd ute $7000 ono lowered,extractors,hd clutch lsd,sub amp cd,18 rims " duel fuel

also

Fs au wagon fcked auto trans $500 firm still runs beautiful was x taxi has a recond motor in it but trans has died interior is nice neat and clean brakes have been replaced allround coilpacks replaced leads straight gas. 500 take it away

pair s15 door trims - $100

s15 black floor carpet - $80

s15 roof lining - $50

s15 centre console - $50

s15 rear parcel shelf - $20

s15 plastic interior parts - $10 each part

s15 standard rear tail lights - $150

s15 pearl white bonnet with silvia bolt badge - $250

(dont hav any pics of s15 parts as they are all standard parts, all are in very good condition)

s13 decat pipe - $50

s13 straight through 3" cat back exhaust with 3" twin pipes - $350

Hybrid turbo T3,T4 flange (think its copy of 30/71) - $350

personalised number plates ICULKN black plate with silver writing - $500

post-76904-0-42362000-1300616190_thumb.jpg

post-76904-0-93348000-1300616371_thumb.jpg

post-76904-0-66471900-1300616530_thumb.jpg

P.M. cheers

As per forum rules please use the 'wanted to buy' thread - no future friendly warnings will be given. I have merged this thread with the for sale one in the hope that this was a genuine mistake on your behalf.

not F/S but free!

PAIR 16inch enkai wheels 16x7 +30ish i think.

look like this but white.

post-16535-0-81631300-1300756255_thumb.jpg

4 x 15x.6.5 falcon steelies.

they the ones with the 12-13 holes around.

there black.

take them or there going to the dump.

not F/S but free!

PAIR 16inch enkai wheels 16x7 +30ish i think.

look like this but white.

post-16535-0-81631300-1300756255_thumb.jpg

4 x 15x.6.5 falcon steelies.

they the ones with the 12-13 holes around.

there black.

take them or there going to the dump.

What's the stud pattern, my mate wants trackday wheels for his rx4

not F/S but free!

PAIR 16inch enkai wheels 16x7 +30ish i think.

look like this but white.

post-16535-0-81631300-1300756255_thumb.jpg

4 x 15x.6.5 falcon steelies.

they the ones with the 12-13 holes around.

there black.

take them or there going to the dump.

PM sent

I have for sale a standard red velo fixed back bucket seat in really good condition. I have sold my car so there is no need for me to keep the seat as it will not fit in the car I want to buy. The seat comes with sliding rails to suit a r34 gtt skyline. Will also come with velo side mount brakets. Price is $500 firm cash only includes everything. Not in a hurry to sell so im not taking a cent less. You can contact me on 0416942503.

GP-90

img0094kc.th.jpg

img0095gg.th.jpg

Edited by viet_pridez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...