Jump to content
SAU Community

Recommended Posts

How cheap without tyres?

PS I can vouch for how sticky the semi's are on J-Rad's wheels guys, I've driven on them in my car for a few wheels while I was without wheels and a cold night in the hills once they're warm its crazy!

How cheap without tyres?

PS I can vouch for how sticky the semi's are on J-Rad's wheels guys, I've driven on them in my car for a few wheels while I was without wheels and a cold night in the hills once they're warm its crazy!

make me an offer too good to refuse :whistling:

Hey all, my first pride and joy of a skyline is up for sale.

1993 Black (KH3) R33 Gts Series 1.

Owned since september last year.

Put on a gts-t kit (minus front bumper)

Replaced interiour with better interior from same series.

Custom stereo with 2 10inch subs in boot and etc.

Decent tred on 18's all round etc etc

213,xxxkms

Looking for 8,000 onobut dont be afraid to give me an offer.

Numberplates do not come with car but will have 3 months rego when sold.

Carsales linky: http://www.carsales.com.au/all-cars/private/details.aspx?R=10487633&__Qpb=true&Cr=7&__Ns=pCar_RankSort_Int32|1||pCar_PriceSort_Decimal|1||pCar_Make_String|0||pCar_Model_String|0&keywords=&__No=15&__N=1216 1246 1247 1252 1282 4294963846 4294963593 463 408 901&silo=1011&PriceTo=408&seot=1&PriceFrom=463&tsrc=allcarhome&__Nne=15&trecs=36&__sid=12E3AC782D77

Any Q's ring me on 0422360999

Clearing out the shed and selling my turbo to make way for something bigger and better.

Brakes, $500 $450 ONO! for the lot;

All were in good working order when removed, BMC has been kept wet since removal, rear calipers will be basically useless for everyone, but pads and rotors are always handy. Won't separate unless you can find someone else to buy what you don't want/need.

S14 4 pot front calipers w/ all hardware & hard lines

S14 1 pot rear calipers w/ all hardware

RDA S14 slotted front rotors

RDA S14 slotted rear rotors

Nissan rotors to suit R33 (plain)

S14 BM44 NON-ABS

1 set Acre Street Fighter pads (front)

1 set QFM A1RM pads (front)

1 set Genuine Nissan pads (front)

1 set Silverline pads (front, unused)

1 set Bendix StreetRoadTrack (rear)

1 set QFM A1RM (rear)

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4315.jpg

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4316.jpg

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4317.jpg

(S14 front, requires machine, 29mm)

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4318.jpg

(S14 rear, good to go, 9mm)

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4325.jpg

(R33 front rotors, good to go, 29mm)

Tial MV-S 38mm external gate, with optional water cooling, brand new, only taken out of the box (which arrived today...) for photos. $400. Firm.

$375! FKING BARGAIN!

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4306.jpg

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4307.jpg

2860 Hi-flow, journal bearing, .64 rear, with HKS Hard intake, Comp cover, inlet, and outlet all powder coated in textured black. enlarged waste gate port (currently at MTQ being done), less than 10,000k's since rebuild. Never run above 1 bar.

$800 with HKS intake pipe, $600 without.

[http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4312.jpg

(Exhaust housing not pictured, will obviously be included).

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4313.jpg

http://i63.photobucket.com/albums/h151/scandyflick/s14/IMG_4314.jpg

Located in the Northern 'burbs.

Can be contacted on here or on 0408961657. SMS messages will likely be ignored.

Cheers!

Dave.

Turbo SOLD!

Prices dropped!

HKS Intake, still available, $200 ONO!

R32 GTST 4door RB20DET for sale. $8,000

Few minor mods- Coil overs, FMIC, Nismo adjustable castor rods, VG30/OP6 turbo, 3" HKS exhaust, 18" rims, body kit, double in new pioneer dvd player, front speakers installed by Cartoys, sub/amp

Will chuck in a 33GTR FMIC, modded ecu, standard turbo and full kit painted silver (vspec?) no damage

Reason for selling is need a bigger car with tow bar and stupid banks wont give me a loan.

0403753320 - Nathan

Have 2 pairs of wheels I no longer need,

First is a pair of lamboghini looking wheels 17 x 9 + 44, 5 x 114.3 No tires

SL370336.jpg

SL370346.jpg

*Note these wheels are reversible if you wanted a ridiculous amount of dish*

SL370368.jpg

$150

Pair of Genuine Watanabe's still have spec stickers. 16 x 8 +35, 5 x 114.3 Must have been specifically made for Nissan fitment, wheels are hub centric to Nissan hubs. Wheels are High disk, have test fitted and they clear R34 GTT 4 piston front brakes. Tyres stuffed

SL370347.jpg

$250

Also got a set of 4 snow tires 215/65R16 about 80% tread, would suit small 4wd or trailer $50 for all 4

Located Modbury SA

PH 0439 683 619

Engine SOLD

R33 Na Intake SOLD

S1 Stagea Oil Pressure Sensor SOLD

R33 Coil harness-$ 30

Full R33 N/A Exhaust with twin tip Supercat muffler. Also willing to separate just give me an offer.

R33 Gutted Cat $30

R33 NA Fuel Pump $20

Front diff cover $20

Awd Sump trays- $20

Stock Cold Pipe with nipple $20

R33 G6 ECU - $40

R33 CC ECU $70

Items:

1. 1993 R32 RB20DET OEM Motor (Short)

2. 1993 R32 RB20DET OEM 5 Speed Manual G/Box & Clutch

Item Condition:

1. Motor has standard internals and is in VERY GOOD condition. Regular servicing (5000 kM oil/filter change, yearly water change etc.). Has been relatively standard all its life until 2007 where it made 170 RWkW on the standard turbo. All that is required is a quick clean. Hydraulic lifters RARELY click on start up (if you leave the car for a week or two and start the car they will tick for about 1 second until the head sees oil pressure/flow).

Comes as a short motor i.e. intake/exhaust manifolds and related parts (associated piping/tubes), ancillaries (a/c, p/s etc.) are NOT INCLUDED. Included is the OEM turbo. If you need further clarification with what comes with this please either contact me or Google what a "short motor" includes.

2. Gearbox is a standard OEM 5 Speed manual from an RB20DET. No noises. No crunches. VERY GOOD condition. Oil changed with Castrol oil (Sydneykid's thread in Drivetrain section of this forum) every 20,000 kM. Comes with a Heavy duty clutch (unknown brand and type etc. until I pull it out in a week or two). Clutch has never slipped. Condition of this part will be know once I have removed them from the car.

Extra Info:

Items will be removed from the car in the coming weeks. More info will be updated as it becomes available as to the condition and type of parts removed.

I will accept deposits.

I MAY separate parts. However, this will depend on several circumstances.

Contact Details:

e-mail: [email protected]

mobile: 0401 317 009

PM me if required

Price and price conditions:

1. $500 ONO Will ship at buyers expense

2. $200 ONO Will ship at buyers expense

OR $600 ONO as a package deal. Will ship at buyers expense.

G/Box back up for sale since buyer would not pay deposit. Clutch Cover/Flywheel required so have been removed from sale. Price still as per above.

Engine no longer available.

Just found a pair of brand new 10mm slip on spacers when I was unpacking.

Free to anyone who needs them.

If these havent gone I really really need a pair

SMS me 0430613360 cheers

Edited by SatchiThaStagea

FOR SALE :

$190

Original R34 Nismo/Altia Rear Bumper in silver, few chips and scratches, bought it and never put it on my car.

$50

Full set of R34 coil packs, all working and in excellent condition of 80,000km motor.

Take em both for $200

P.M for pictures, or contact me on 0415087363.

Coil Packs are goneeee.

Have 2 pairs of wheels I no longer need,

First is a pair of lamboghini looking wheels 17 x 9 + 44, 5 x 114.3 No tires

SL370336.jpg

SL370346.jpg

*Note these wheels are reversible if you wanted a ridiculous amount of dish*

SL370368.jpg

$150

Pair of Genuine Watanabe's still have spec stickers. 16 x 8 +35, 5 x 114.3 Must have been specifically made for Nissan fitment, wheels are hub centric to Nissan hubs. Wheels are High disk, have test fitted and they clear R34 GTT 4 piston front brakes. Tyres stuffed

SL370347.jpg

$250

Also got a set of 4 snow tires 215/65R16 about 80% tread, would suit small 4wd or trailer $50 for all 4

Located Modbury SA

PH 0439 683 619

Lambo looking wheels sold

R33 gts-t rb25det Genuine manual radiator in good working condition $50

Sniper carbon door scuffs both sides to suit a nissan 2door r33 skyline(never used) $100

gtr drag intercooler core size 600mm x 290mm x 120mm, inlet & outlet 80mm, overall length 1070mm(was used on my r33 with around 204kw and hade no probs. only 300km of use. $250 ono

R33 gtst overflow and washer bottle $25 for both

R31 cluster reads 313967 from a 89 oz spec(been sitting in my shed for 3yrs was working before i took it out)$30

R33 Air Conditioning Condenser gtst 1994 $50

pm me

Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...