Jump to content
SAU Community

Recommended Posts

s1/2 r33 rb25det head for sale, rebuilt 7000kms ago have receipts, motor has done rings so replacing it with a neo 6 and selling off the bits.

Head is very clean, turns over by hand fine, all valves look fine.

call Roland on <removed> or PM me on here.

F.S

R32 GTR 93

DEFECTED

NEEDS NEW TYRES, SIDE INDICATORS, HORN, WINDSCREEN WIPER RUBBER,

125XXX KM

260KWATW GOT DYNO SHEET

MINES COMPUTER & AIRFOW METRES.

CAR IS DEFECTED AND I DONT HAVE THE TIME OR MONEY TO GET IT OFF . I NEED THE CASH ASAP THIS IS WHY IM SELLING THE CAR CHEAPPPPPPPPP,

BODY IS STRAIGHT AND ENGINE COMPRESSION IS EXCELLENT, ANY CHECKS ON THE CAR IS WELCOMED. BODY IS A LIL ROUGH AS IT WAS A BACKYARD SPRAY JOB

FIRST WITH CASH GETS IT I AM NOT HOLDING IT FOR ANYONE, NEED TO SELL BY THIS WEEK.

8K FIRM

0468931301

F.S

R32 GTR 93

DEFECTED

NEEDS NEW TYRES, SIDE INDICATORS, HORN, WINDSCREEN WIPER RUBBER,

125XXX KM

260KWATW GOT DYNO SHEET

MINES COMPUTER & AIRFOW METRES.

CAR IS DEFECTED AND I DONT HAVE THE TIME OR MONEY TO GET IT OFF . I NEED THE CASH ASAP THIS IS WHY IM SELLING THE CAR CHEAPPPPPPPPP,

BODY IS STRAIGHT AND ENGINE COMPRESSION IS EXCELLENT, ANY CHECKS ON THE CAR IS WELCOMED. BODY IS A LIL ROUGH AS IT WAS A BACKYARD SPRAY JOB

FIRST WITH CASH GETS IT I AM NOT HOLDING IT FOR ANYONE, NEED TO SELL BY THIS WEEK.

8K FIRM

0468931301

Ohh and you can't legally sell a defected car in SA.

you can but it needs to be sold as a wreck.. as you cant legally transfer rego into your name which means you dont "own" the vehicle.

i bought a defect car, then sold it, guy who bought it got caught speeding and as i could transfer it into my name the cops came after me, then i said i sold it so they went after him, but fined me for selling and buying it.

Contact: 0402 902 759

Location: Adelaide

R34 Parts

Door cards $150

sdc12044h.th.jpg

Turbo Back Exhaust , standard dump, 3" front, cat, 3" catback with cannon and 4" tip $450

sdc12045l.th.jpg

sdc12046bm.th.jpg

R34 Passengers guard $150

sdc11752.th.jpg

sdc11751u.th.jpg

R34 Rear Seat $80

rearseat.th.jpg

Glove Box $50

sdc12042tu.th.jpg

Complete Boot Interior, Mat, Side panels, Black plastics $150

KYB Buzz Spec Suspension, damper adjustable $500

sdc12056.th.jpg

sdc12057n.th.jpg

sdc12059.th.jpg

Front Reo $150

R34 Bonnet $300

sdc11483g.th.jpg

Front strut brace $100

Rear parcel shelf $50

Dash + Airbag $200

Interior rear quater panels, Pair $100

ECU cover $30

R34 Brakes

Front and Rear

Calipers and Rotors

$650

sdc12051u.th.jpg

sdc12052u.th.jpg

sdc12053q.th.jpg

Dash Cluster $80

speedoe.th.jpg

Zenon Headlights pair $900

Front Lower Control Arms pair $175

sdc12049e.th.jpg

Standard Intercooler $130

sdc11753.th.jpg

sdc11754o.th.jpg

S13 SR20 Blacktop Power FC with hand controller. Can be converted to redtop S13 SR20. $850

sdc12063b.th.jpg

GCG Highflow turbo $1000

sdc11758v.th.jpg

sdc11760.th.jpg

sdc11762.th.jpg

sdc11765.th.jpg

R33 Diff $150

sdc12047.th.jpg

R32 Cat back exhaust $300

sdc11767h.th.jpg

sdc11768u.th.jpg

R32 Turbo $100

4x Bridgestone Playz 245/45/18 $150

sdc11468lk.th.jpg

17" x 7.5" +30 pair $50

sdc11479.th.jpg

S14/R33 Steering wheel $220

sdc11512b.th.jpg

R32 GTS-T Steering Wheel

sdc11542u.th.jpg

Apexi ECV $200

sdc11543.th.jpg

Boost Gauge $50

sdc11551.th.jpg

Steering wheel 80mm of "dish" $70

sdc11553i.th.jpg

Nardi Wheel $220 Each

sdc11554w.th.jpg

Steering wheel bought from Japan in late '08 $100

sdc11556g.th.jpg

Nardi Wheel $220

sdc11558r.th.jpg

Turbo time with loom from a 32

sdc11559b.th.jpg

FIRENZA 245/40/18 pair $120

sdc12032c.th.jpg

5 Stud none type M Wheels from R32 GTS-T, 2 with brilliant tyres, 2 are bald $150

sdc12033x.th.jpg

sdc12034o.th.jpg

Sparco Wheel x 4, All tyres are of no use, 17"X7.5 $150

sdc12036.th.jpg

Any 34 owners interested in a rear strut brace? I have this: http://www.justjap.com/store/product.php?productid=18327&cat=394&page=1

Its brand new, only test fitted by previous owner, then sat in my shed. Paid full retail for it, they are on special with JustJap for $75 + post, come and pick it up for $80!

Contact: 0402 902 759

Location: Adelaide

R34 Parts

Door cards $150

sdc12044h.th.jpg

Turbo Back Exhaust , standard dump, 3" front, cat, 3" catback with cannon and 4" tip $450

sdc12045l.th.jpg

sdc12046bm.th.jpg

R34 Passengers guard $150

sdc11752.th.jpg

sdc11751u.th.jpg

R34 Rear Seat $80

rearseat.th.jpg

Glove Box $50

sdc12042tu.th.jpg

Complete Boot Interior, Mat, Side panels, Black plastics $150

KYB Buzz Spec Suspension, damper adjustable $500

sdc12056.th.jpg

sdc12057n.th.jpg

sdc12059.th.jpg

Front Reo $150

R34 Bonnet $300

sdc11483g.th.jpg

Front strut brace $100

Rear parcel shelf $50

Dash + Airbag $200

Interior rear quater panels, Pair $100

ECU cover $30

R34 Brakes

Front and Rear

Calipers and Rotors

$650

sdc12051u.th.jpg

sdc12052u.th.jpg

sdc12053q.th.jpg

Brings tears to my eyes seeing my old 34 in pieces :'( Any chance you have the speakers man??

Fund my rebuild peeps!

R33 GTR REAR strut brace, $130.

R33 GTR REAR swaybar, $60.

Standard R33 GTS-t swaybars - front and rear - $30 each.

PAIR of 5x114.3 rims, still plenty of meat on the tyres, white, 5-spoke, gutter rash but decent offset. Perfect for skidding. 17x8 I believe. $250

RB20DET reflashed to suit Series 2 RB25DET w/ 12psi, cooler and exhaust $120

Also EOI - Genuine Bride Zeta II on Genuine R33 Bride rail, worn on drivers side bolster but seat is still perfectly usable $450.

100_06902.jpg

Edited by Bridgy

Hey, stripped the last of the R32 (2dr). All these bits are $5 each. Come get em or they're goin to the dump. :)

All gotta go

Msg anytime: 0421666324

Sam

Is that the entire boot trim?

Anyone want my AIM Mychron Light lap timer.

Bought it second hand about 12 months ago and haven't used it but since i don;t have a running car at the moment it's probably more important that i get my car running than have a $300 lap timer sitting on my shelf.

Price $300

Cost me $350

MyChron-Light-TG-small.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...