Jump to content
SAU Community

Recommended Posts

awesome value right there I can vouch for that product

I ran about 13.7 psi daily for about 3 years reliably

Matty see Martin when your ready to set it up I'm sure he would only charge what a power run would be worth 1 hour on the dyno at max so that may be between 70-150$

disclaimer obviously I am not the dyno operator and aforementioned price is only a guide/guess

awesome value right there I can vouch for that product

I ran about 13.7 psi daily for about 3 years reliably

Matty see Martin when your ready to set it up I'm sure he would only charge what a power run would be worth 1 hour on the dyno at max so that may be between 70-150$

disclaimer obviously I am not the dyno operator and aforementioned price is only a guide/guess

Seems like the right idea. When they did my power fc we had some dramas with the boost control kit, so gareth put a manual bleed valve on and had it on and off the dyno in a matter of minutes! We had gone through alot of s**t and it was a dream come true to finally have the car running tip top. Above all that, no charge for dyno and i had to make gareth take a $50 note for the bleed valve! 10/10!

Back onto topic.. R32 GT-R factory front grille still for sale.. $150 (silver, perfect condition)

Also SRI hicas lock bar and bypass hose kit to suit s13/r32

Unused, still wrapped..

$100

FOR SALE: CP Pistons Sets-Nissan Skyline rb25 or rb26, 86.5 Bore

Features include:

- High strength aluminum forgings

- Super lightweight designs

- Fully CNC machined and balanced to +/- 1 gram

- Wrist pins included at no extra cost

- Accumulator groove included

- Double pin oilers, force fed from oil ring

- Pick lock grooves for easy lock removal

Comes Complete with:

(6)Pistons

(16)Locks

(6)Wrist Pins

(6)Piston Ring Sets

CP Pistons Sets-Nissan Skyline, part# sc7308

im asking $850 ONO, no reasonable offers refused

any questions please PM me, sms or call me on 0439262702

post-57938-0-21076500-1315217849_thumb.jpg

post-57938-0-62571600-1315217868_thumb.jpg

post-57938-0-19302400-1315217882_thumb.jpg

ARP NISSAN RB20 RB25 HEAD STUD KIT

THIS KIT COMES WITH: STUDS, WASHERS, NUTS, AND ASSEMBLY LUBE.

TO SUIT:

NISSAN RB20DE, RB20DET, RB25DE, RB25DET

Replace your stock head bolts with ARP heavy duty head studs. The stud design helps the head and the block equalize the pressure better thereby creating a much more even and consistent seal. It is recommended to replace the head studs/bolts with a new set if the head bolts are ever loosened due to metal fatique. Reusing an old and possibly warped or stretched head bolts/studs will sacrifice the seal between the head and block and may cause head gasket leak. This is a great an easy upgrade when doing an engine rebuild or building a race motor.

the studs are still in the box and have never been used,

im asking $200 ONO, no reasonable offer refused!

any questions feel free to PM me, txt or call me on 0439262702

post-57938-0-32042200-1315218307_thumb.jpg

RB20 - RB25 - RB30 main and rod bearing kit, .25 ovesize

ACL RACE SERIES PEFORMANCE BEARINGS

THIS KIT PRICE IS FOR A FULL SET OF MAIN BEARINGS AND CONROD BEARINGS THEY ARE STILL BRAND NEW AND STILL WRAPED IN THE FACTORY PLASTIC

BEARINGS ARE .25 OVERSIZE

$200 ONO, NO REASONABLE OFFERS REFUSED!

ANY QUESTIONS PM me, TXT OR CALL ME ON 0439262702

post-57938-0-93654900-1315219119_thumb.jpg

FOR SALE:

- HIS IceQ X Radeon HD 6950 - pretty much BRAND NEW as I've only taken it out of the box, fitted it up, havent powered up as I was short a PCI-e power cord(was going to get another one today but something has came up and rather the money) - I paid $291 posted a few days ago so it's under warranty and have receipt to prove - selling for $250 firm

--------------------------------------------------------------------------------------------------------------------------------------------------------

Prefer SA buyers for the following to save postage so will post it up here and will open it up to interstate buyers in a few days

- rear upper adjustable camber arms to suit R32 GTR/GTST and maybe other Nissan models - $100

- pair of NISMO N1 turbos to suit RB26DETT, made 270rwkw @ 13-14psi - still on the motor, will have it out within the next day or two - $900

Expression of interest for now - let me know if you're keen, may or may not sell but currently very likely:

- RB26DETT cam covers, spark plug cover and timing belt cover - $350

- RB26DETT head - $800

Any questions feel free to PM me!

Selling a Greddy Emanage Blue.

- Universal Fuel / VTEC Harness.

- Laptop Cable

- Injector harness

- Ignition Harness

- Various connectors, cable-ties etc

- Warranty Card

http://www.ebay.com....=item2567593ce1

If a SAU member wants to pick it up before it sells will do for $300

for sale SR20DET complete engine minus turbo .Has all manifolds stater coil packs alt exhaust everything had slight bottom end noise when pulled out only 120xxxx on clock would say conrod shell bearing. want it gone need shed space and engine stand back for the RB 25.:thumbsup: $450

R33 gtst complete diff and craddle minus brakes and hubs $150 ono front cross member minus hubs and brakes $50 also a set of bilstiens for r33 say $100 ono

cheers

bilstiens and front cross member sold

R33 gtst complete diff and craddle minus brakes and hubs $150 ono front cross member minus hubs and brakes $50 also a set of bilstiens for r33 say $100 ono

cheers

bilstiens and front cross member sold

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...