Jump to content
SAU Community

Recommended Posts

Few items taking up space in the shed will add photos up tomorrow

Set of 18x9.5 and 18x9 Starcorp impuls little gutter rash on a couple, comes with Nexen N6000 tyres with a little life left in them, not heaps thou

$850

Factory full R34 Gtt coupe exhaust, dump, front, cat, nismo muffler and tip

$200

R34 Gtt SMIC

$100

contact me via PM or SMS 0402 001 230

Selling my Enkei RPF1 17" rims off my R33 GTST as i have bought some 19". First owner/came on car from japan when i bought it.

Looking for 800 without tyres. In very good condition. have painted rear rims (fronts untouched). They come with the paint used as well as the spacers.

I think they weigh around 6kg without tyres if that!

Front 17 x 8

Rear 17 x 9

Offset +35 all round

can see photos at this link - http://www.flickr.co...67@N05/?saved=1

Can post interstate at buyers expense. my number is 0427265840 if needed

Rims boxed up and ready to be picked up or shipped!

hey guys need to clear the shed out,

have interior trim, door cards, quarter cards, rear seats and front seats for a series one r33.

rhs drivers seat has the usual wear and whatnot on the seat, the rest are in smick condition.

have 2X drivers door cards i think from memory, one has a hole for a tweeter (same with lhs door trim from memory but can check)

not needed anymore, take the lot for $ 80 ono (payed over 200 for everything sourcing it all) if u want individual bits pm me.

series 1 r33 spoiler with brakelight, in black (kh3), good condition - $ 30 ono

replica gtr wing r33 (fiberglass) will not fit endcaps and no i dont have any with the sale of this, has led brake light fitted - red in colour can check paint code if needed - good condition - no longer needed due to new spoiler - $150 ono

r33 drivers side window glass, came out of a doner door for my car - not needed but not an issue if i dont sell - $25 ono.

also have some 235/40/18 tyres with some camber wear, can be switched sides, still have roughly 50% rubber left where there is no camber wear. $ 50 for both? make an offer - i beleive their neutons but can check for you.

also have 4X stock r33 rims, 2 with good tred 2 need replacing, just an eoi but if needed can sell at right price.

pictures are available on request. - text me on 0422360999 or pm, whatever works best for you and ill get back to you asap.

cheers - aaron. :thumbsup:

tyres are sold everything else still for sale, thow me some offers, quite negotiable on prices :)

R32 GTR for sale - $24k, open to swaps for something of ALOT lesser value(and still a Nissan) + cash - call me on 0433743661 for further details

No hurry to sell, not even that interested in selling but if you make a VERY reasonable offer then we'll work something out - if you're looking for a cheap GTR then look elsewhere, if you want something clean reliable and well modified then give me a call :thumbsup:

313606_314448945236282_152317291449449_1458464_1144636794_n.jpg

Set of 18x9.5 and 18x9 Starcorp impuls little gutter rash on a couple, comes with Nexen N6000 tyres with a little life left in them, not heaps thou

$850

Can i get some pics andrew, always regretted getting rid of mine off the ford.

Cut and Paste from my NS.com Sale.

Hello All,

Up for Sale is my Haltech E8 ECU.

I bought it 12 mths ago s/hand and have never used it as i've been building and engine, and i've now decided that i'm going to stick with NIStune.

It came with a S14 (series 1) patch loom when i bought it and i have since bought a CA18 patch loom as well.

It will be sold with either the S14 loom or the CA18 loom, i'll also throw in the USB to serial cable i bought for it as well as a 3BAR external MAP sensor and the MAP sensor Loom.

Cost Me $1300 i'll let it go for $1200.

Located in SA but willing to Post Aust' wide for $20.

The Patch Loom that doesn't go with the ECU will be sold separately, the Patch looms are also compatible with the Haltech PS1000 Series.

Spec's List and Manual can be found in the NS thread'

http://www.nissansilvia.com/forums/index.php?showtopic=513303

Edited by D_Stirls

My r33 gtst s1 price drop to 10k under the for sale section as 'Resprayed burgundy r33 gtst' offers considered as I want my gtr!! R33 s2 complete doors 100 bucks each 175 for both, nismo steering wheel with boss kit 75, 4 inch cat back exhaust with 5 inch cannon 100 or so. veilside bodykit burgundy 150- includes Rear pods, skirts and front bar.

After a Quick sale

R32/R33 Apexi Power FC

Hand Controller

Boost Control kit with Lines,fitting,Map sensor, Actuator

In box as per pic. Perfect working order. No scratches on Commander

Has tune from my 533kw GTR(E85) 1000cc injectors still in it.

Quick Sale $780 delivered with tracking (Tas extra)

Matt 0413023669

193b5717.jpg

Field boxer II linear Pro 4WD controller with Harness.

Sensational control for time attack

G force, % split display

Knobs change from Green to Red to show which G sensor is being accessed

GTS4, R32, R33, R34 GTR

$200

Matt 0413023669

4913b814.jpg

Edited by BoostdR

cant edit my post but i forgot to add ,

R33 GTR carbon fibre grill brand new still in box $150 bought it for over 200 not long ago.

and my 33 gtst for sale as i couldnt post link on my phone before >>> http://www.skylinesaustralia.com/forums/topic/380894-for-sale-resprayed-burgundy-r33-gtst/

make offers can lower price under some circumstances and agreements if you think its too much, give me a call anyway.

For Sale,

BRAND NEW 52mm R32 Radiator

R32 ASI 52mm Aluminium radiator. Bought it for my 180sx but since it is wider i can't use a R32 radiator as it's a bit tight, I need a specific CA S13/180sx one.

Cost Me $210

Sell for $180

SOLD

R33 GCG large highflow minimul shaft play pu rear housing $500ono also hypergear 15 psi actuator $75 or $550 for the lot. only changed due to a garrett 3076r upgrade on my car

cheers Jase

R33 GCG large highflow minimul shaft play pu rear housing $500ono also hypergear 15 psi actuator $75 or $550 for the lot. only changed due to a garrett 3076r upgrade on my car

cheers Jase

SOLD! to the good looking man with impeccable tastethumbsup.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...