Jump to content
SAU Community

Recommended Posts

**** Who Needs Some new rubber ****

#### BRAND NEW TYRES FOR SALES ####

Hey guys i have a set of 4 BRAND SPANKIN NEW jinshu Tyres for sale!!! Could be handy if your going to the Up coming Christmas cruise this weekend and don't want to get defected for slicks.

The sizes are 2x 18/40/235 and also 2x 18/40/225 i reckon thats right it maybe 35 instead of 40 tho but i can find that out later. PRICE: $350 ONO

Story goes i had a nice set of grenades i was going to put these on how ever the rims were f**ked i just didn't see the damage when i brought them so now the rims are gone i still have the tyres left over.

I'm about to go on a holiday to Sydney on the 26th and would love the cash so give me a call on 0416153371 if your interested.

hey guys,

If anyone is interested i am selling my White R33 Skyline GTS-T. I have it up for sale on Carsales for $9500 however it is an urgent sale! so i will probably accept anything over $8500. (but can't go any lower then that) if you know anyone who is keen PM me or check my car out on Carsales Plate no. S260ACO :)

Slight bit of damage on front fender other then that, the car is in good condition with 192000kms on the engine. (cluster was replaced at the wrecker which shows 152000kms on the clock)

Sorry: will not separate

Thanks,

Jamie

post-68517-0-03573600-1323984291_thumb.jpg

SHED CLEAN OUT

All items located in Eastern Suburbs

1. Castrol Transmax Z

4L - $55

375999_2687742507840_1084756809_32967357_944396645_n.jpg

2. OBD II - USB Consult Cable SOLD

w/Belkin serial to USB adaptor :-) - $50

3. RB25 Coilpack/Vally Cover

$20

385128_2687742387837_1084756809_32967356_592425415_n.jpg

4. Tein Dust Covers

$15

386005_2687742027828_1084756809_32967354_443319781_n.jpg

5. Tein Bump Stops

$15

384386_2687742267834_1084756809_32967355_1608597636_n.jpg

1. s2 33gts4 kr4 silver almost complete car, just missing some interior and body panels. shell damaged, cannot be used - all the runing gear + lots more there. $1500

2. 4x114.3 19" dished wheels in good condition, minor gutter rash, as ussual. $900 with 3 brand new tyres and 1 is 50% tread.

img0209zs.jpg

Uploaded with ImageShack.us

3. Kakimoto 3" suit r33 mint condition, sounds awsome and looks dope! $350

img0219lw.jpg

Uploaded with ImageShack.us

Also have a bunch of other r33 parts, and JBL 15" sub with amp, 5" autometer monster tacho etc. PM me.

1. s2 33gts4 kr4 silver almost complete car, just missing some interior and body panels. shell damaged, cannot be used - all the runing gear + lots more there. $1500

2. 4x114.3 19" dished wheels in good condition, minor gutter rash, as ussual. $900 with 3 brand new tyres and 1 is 50% tread.

img0209zs.jpg

Uploaded with ImageShack.us

3. Kakimoto 3" suit r33 mint condition, sounds awsome and looks dope! $350

img0219lw.jpg

Uploaded with ImageShack.us

Also have a bunch of other r33 parts, and JBL 15" sub with amp, 5" autometer monster tacho etc. PM me.

How much for amp and sub?

fs

R32 bn 4 door brand new rear bar and sideskirts

Rb25det head

2 sets of 180sx stock tailights and garnish good conditon

4 rims 17x9 17x8 japanese made pss lightweight raing wheels shagged tyres

vn vp calais mint leather rear seat

Price?

And, its a long shot but, any chance you got an inlet manifold for R33?

Narva Optimax rotating light with magnetic base and cigarette lighter plug

Perfect if you're having to go on and off of construction sites (for work or deliveries), a lot of places require a rotating light of some form. Cheap and easy way (and removable) if you require it. I know theres a few tradies in here that could add this to their toolkit

The bad bits - the lens is a bit scratched and scuffed in a couple of spots (more a looks issue, still works fine), the magnetic base doesnt have the anti-scratch pad attached anymore (wouldnt be hard to get a bit of felt or something and glue to it) and the plug is taped up so it doesnt come apart. Otherwise all functions perfectly

These are 150 new normally, special deal of $50 before christmas

Contact me via PM

IMAG0306.jpg

IMAG0307.jpg

IMAG0308.jpg

IMAG0309.jpg

R32 Skyline 1992 RB20DET Manual $6250!!!

- Heavy Duty Clutch

- Turbo

- Front Mount Intercooler

- 18 Inch Rims

- GT4 R32 Front Seats

- 3 Inch Exhaust System

- R32 GTR Radiator/ with New Radiator Fan

- MP3/ USB CD Player

- Spoiler has been removed but i will give it with the sale.

Paint is in average condition with some Clear peel on roof

post-89566-0-35118800-1323583699_thumb.jpg post-89566-0-46703800-1323583915_thumb.jpg

post-89566-0-61481900-1323583722_thumb.jpg post-89566-0-52746300-1323583766_thumb.jpg

Phone: 0403 218 112

Can someone from admin please erase this from the forum thanks for any help

shell - $4500

1993 mspec r32

Clean rego'd shell

sunroof

gtr front guards

geniune N1 gtr front bar

gtr front indicators

BRAND NEW BC coilovers

rear camber arms

front caster arms

hicas lock bar

vanquish roof spoiler

origin s13 boot lip

CF vented bonnet

bolt on rear guards

r34 gtt front brakes with slotted rotors, A1RM pads

nolathene bushes up front

3inch cat back

comes with fmic and piping to suit forward plenum

has engine loom to suit rb25 in r32

CD player, front splits and 6x9 rears

NO rear seats, no drivers seat, no diff, no engine, no gearbox, no wheels.

VSKF - $300018x9-6 and 18x10.5 -5225/40 and 235/40 neutons black with chrome dish

cusco 2way diff - $750

fuel setup - $500

external pump, surge tank, magnaflow fuel filter, speedflow fittings for pump surgetank and filter

defi BF gauges x3 - $800

oil temp, oil pressure, water temp, control unit, light up white with black background

bride style seat with superlow rail - $450

s2 splitfires - $450

r32 radiator with fan shroud - $150

r32 clutch fan - $100

sms me for pics - 0433290801

Kicker sub and amp and all wiring, in a proper ported Kicker box also, $300. Last years comp sub, came out of a car I no longer have so don't need it, great sub!

img0218q.jpg

and got some tyres:

2X 215/45/R17 KU36s, camber wear, have a track day/few hills runs still left in them $100 for both

2X 215/45/R17 Bridgestone tyres, 98% tread left $150 for both

2X 235/45/R17 KU36s, have a good skid left in them, below wear bar, $20 for both?

2X 235/45/R17 Federal 595-SS, just above wear indicator (or on can't remember) still good for a few skids $60 for both

or take them all for $250 clams!

Located in Southern Suburbs of SA.

Pickup preferred but will post if necessary.

No low-ballers please but willing to consider somewhat reasonable offers.

Reason for sale is because I have since upgraded and no longer require the current parts:

Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO

Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April.

The entire kit is being sold including:

  • Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw)
  • Lightweight moly flywheel (single-mass, less weight than the dual-mass)
  • Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?)
  • Xtreme Pressure plate
  • Fork pivot ball

The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out.

The part number for it is: TB40017

Part is only about $50 direct fomr ACS in Wingfield, SA

Link:

http://www.australia...sp?parentid=118

Picture attached of clutch and pressure plate:

wp000152.jpg

wp000155h.jpg

throwout.jpg

PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps!

Great for decent power gains required on a budget without much pressure drop.

Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core.

Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core.

If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK!

hybridfmic.jpg

S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO

Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy.

knfilter.jpg

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one.

2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so?

mount1j.jpgmount2v.jpg

mount3q.jpg

8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO

sparkplugs.jpg

Will post some items if they don't sell locally except for the intercooler.

In regards to contacting, please PM me and we can go from there.

Cheers.

Edited by Ruff Ryda

NOTE: ITEM WON:LT BE SOLD SEPERATELY:

S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO

Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fork pivot ball to minimise the load that's placed on the standard one.

Will be sold in the clutch kit package, not seperately so please disregard listing.

Edited by Ruff Ryda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...