Jump to content
SAU Community

Recommended Posts

AutoMeter silver face pro comp mechanical boost gauge (66.7mm).

Given to me by a mate & never installed, sitting in its original box.

$60 (gauge only, no vacuum line, t pieces or mounting bits are included)

post-16018-0-93549400-1333349924_thumb.jpg

PM if interested

cheers

got some stuff for sale guys as my gearbox is on the verge of death now, so trying to free up some dollars for that.

Just jap dump pipe, suits R34. bought last week and has been on the car for all of 3 days. has just gotten that slight golden tinge stainless goes when hot. - $180

Just jap decat w/ gaskets, suits R34. - $50

Pioneer DEH-1350MPG stereo, bought to get the aussie station realised ive never really used it. comes with nissan -> iso -> pioneer wiring so no cutting/soldering required, can also throw in din pocket - $120 ono

Trust gearknob, not a scratch on it, just sits ontop of my busted gearbox :/ - $40 ono

Turbotech manual boost controller, was fitted for about a week until i swapped it out for an rb20 actuator - $25

and the LEFT weathershield from my 34 2 door, comes with all clips - $15 ono

can be contacted on 0433 987 945 or by pm

cheers ben

post-89886-0-50060900-1333354754_thumb.jpg

post-89886-0-39043800-1333354819_thumb.jpg

post-89886-0-53066600-1333354933_thumb.jpg

post-89886-0-69457000-1333354981_thumb.jpg

Anyone want a bent (looks like a failed flare job) RHF R32 GTR guard in Gunmetal Grey for $30ono, guard is bent due to having the wheel fall of the car and get cought in the guard before it flew out. My step dad wants it gone as it's taking up room in the shed. The wheel in the picture is an 18X8.5 unsure offest. PM or txt on 0433 522 234

post-62269-0-66671200-1333355877_thumb.jpg

hey guys up for sale i have a mint r32 series 2 steering wheel never seen another one like it its got a leather horn button unlike the usual standard one with the clear plastic coated one $150 firm pm me or text me on if interested 0421675373

cheers BEN.

pics upon request via text cheers

Edited by BENDERS32

hey guys up for sale i have a mint r32 series 2 steering wheel never seen another one like it its got a leather horn button unlike the usual standard one with the clear plastic coated one $150 firm pm me or text me on if interested 0421675373

cheers BEN.

pics upon request via text cheers

then its not series 2

then its not series 2

and that actually does make a big diff - the hicas magnets/sensor points are located in different positions. I was scratching my head for months till someone here told me about it. swapped the boss kit I had with a stock wheel and magically, I had hicas.

Cool story eh?

-D

and that actually does make a big diff - the hicas magnets/sensor points are located in different positions. I was scratching my head for months till someone here told me about it. swapped the boss kit I had with a stock wheel and magically, I had hicas.

Cool story eh?

-D

i like it laugh.gif

R34.

1998.

Turbo, Manual.

106k clock.

Blitz cooler,

Power FC,

Blitz EBC 14 pound.

Oil Cooler,

HKS pod.

exhaust

17" Jap wheels.

Welded diff, which some ppl take a while to get used to.

Only ever driven to work, never on cruises or circuits etc.

Bit of a waste in me owning, Really after a decent 4x4 with lift kit etc.

Just serviced, Oil, New belts, New brake pads

15k Firm. Cheap.

post-45384-0-37245600-1333437639_thumb.jpg

post-45384-0-09366800-1333437660_thumb.jpg

got some stuff for sale guys as my gearbox is on the verge of death now, so trying to free up some dollars for that.

Just jap dump pipe, suits R34. bought last week and has been on the car for all of 3 days. has just gotten that slight golden tinge stainless goes when hot. - $180

Just jap decat w/ gaskets, suits R34. - $50

Pioneer DEH-1350MPG stereo, bought to get the aussie station realised ive never really used it. comes with nissan -> iso -> pioneer wiring so no cutting/soldering required, can also throw in din pocket - $120 ono

Trust gearknob, not a scratch on it, just sits ontop of my busted gearbox :/ - $40 ono

Turbotech manual boost controller, was fitted for about a week until i swapped it out for an rb20 actuator - $25

and the LEFT weathershield from my 34 2 door, comes with all clips - $15 ono

can be contacted on 0433 987 945 or by pm

cheers ben

Do you kno if that decat pipe would fit on a r33 ? if so ill take it

For sale Brother MFC 9210. Home office printer. In excellent condition was a $1000 new selling for $250. Great for someone starting up a home office or allready has one.

Phone Brad 0427999093. Located near Parafield airport

post-52024-0-87103200-1333574574_thumb.jpg

Got a Brand new car entertainment/navigation system, bought it a week ago, arrived today however doesnt fit in my toyota dash (screen too wide) :(

Specs:

2-Din 6.2-Inch TFT LCD Touch Screen HD digital panel ( 800*480)

USB AND SD Interface

Compatible With DivX/DVD/VCD/CD/CD-R,RW/MP3/MP4

Built-in Digital TV Tuner

Built-in AM/FM Stereo Receiver

BUILT-IN GPS navigation

BLUETOOTH

IPOD ready

Radio With 18FM & 12AM Pres

Sowx4 Max

Rear Monitor video output

TFI high definnition IN-Dash LCD

Full function remote control

Automatic PAL/NTSC,wide application range,highly compatiable.

Few video inputs/outputs

Paid $450, yours for $400 need it gone asap.

comes with everything, gps antenna, ipod cable, usb cable etc. Still in box, only inspected and measured.

post-32258-0-20550800-1333616530_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...