Jump to content
SAU Community

Recommended Posts

FS

Piaa japananese racing rims (spokey) 17x9/8 4/5 x114..3 (ofset will put up soon theer ok) $600

post-77561-0-29041600-1341397342_thumb.jpg

Maray vertec vr5 18x9.5 +45 Pair 600

post-77561-0-98206700-1341397368_thumb.jpg

17x9 offset is killa full set decent dish(polished lip black centres could do with refurbishing) $1000

post-77561-0-42487700-1341397350_thumb.jpg

ono plz contact me

FS Car audio

DLS A6 mono amplfier 1200wrms $700 ono

Soundstream PCA 2.520 $300 ono

CDT audio splits brand new minus tweeter payed $600 fs 4 $300

Kicker 300wrms $150

soundstream 1000wrms sub $200

Up for sale is a set of Gmax Engima rims and tyres, i bought these wheels brand new from a company here in Adelaide, and it cost me a fortune for these stunning wheels, i have had them on my R33 skyline and they looked excellant with perfect clearance between the calipers and rims, the rims centres are a shadow grey with polished lips, i have cleaned these rims religiously once a week and no brake dust has been baked onto the rims, these wheels have never been buckled or had any dents etc, the tyres on there where quite expensive and still have nearly 100% tread on them, the wheels are approximatly 18x9 and will fit all 5 stud nissans, fords, toyotas, etc 5 x 114.3

Looking for around $1100 ONO

For more pictures or queries dont hesitate to call me on 0402930153

35alyyu.jpg

Edited by SLY333

Up for sale is a set of Gmax Engima rims and tyres, i bought these wheels brand new from a company here in Adelaide, and it cost me a fortune for these stunning wheels, i have had them on my R33 skyline and they looked excellant with perfect clearance between the calipers and rims, the rims centres are a shadow grey with polished lips, i have cleaned these rims religiously once a week and no brake dust has been baked onto the rims, these wheels have never been buckled or had any dents etc, the tyres on there where quite expensive and still have nearly 100% tread on them, the wheels are approximatly 18x9 and will fit all 5 stud nissans, fords, toyotas, etc 5 x 114.3

Looking for around $1100 ONO

For more pictures or queries dont hesitate to call me on 0402930153

35alyyu.jpg

Had these on my Gunmetal R32 GTST, Looked f*#kin amazing, realy wish I could afford these........awsome looking wheels.

For sale is my pride and joy: 1996 R33 Series 2 GTS-T Nissan Skyline (Silver, Manual) 154xxx KMS

I've owned it for the past 3 years and loved every minute of it, reason i'm selling is i need something more 'sensible'. Hubby and i both have imports which = too much $$$ lol

Its in pretty good condition, the exterior has a few paint chips , couple on the bonnet theres one probably less than a cm and a few on the inside of the drivers door but because it's silver the colour underneath isnt too far off so not too noticable.

Interior is almost immaculate, drivers seat has wear and tear on the side from getting in/out over the years (was like that when i bought it) but i have since always had seat covers on. Has all orignal Skyline mats front and back.

I've recently bought brand new black leather (with white stitching) gear stick and handbrake boots which match the pearl white dash perfectly :) have also recently replaced the steering wheel with one in near perfect condition.

Have recently fitted brand new brake pads all round, re-gased air con, and replaced heater core.

Fitted on the car:

18" wheels (will have to get back to you on the brand!)

Exhaust

Front mount

Pod filter

2 Thermo fans

Full Pioneer sound system: CD player MP3/AUX input, 6 pioneer speakers (tweeters, 3 way 6" in front doors and 6x9's on parcel shelf)

Also comes with stock wheels (with tyres) and spare.

Only issue is speedo is playing up, it stops working occasionally so i am currently sourcing a replacement.

Please contact me for more info (no time wasters, or swaps!) 0433 680 758

Cusco r33 bmc stopper $60

3" cat back stainless steel RSR system with AM Performance rear mufflers $500

Top secret style rear carbon fibre rear diffuser. To suit r33 but will fit pretty much anything. Few scratches underneath,nothing you can see unless your under the car. $500

reconditioned Ps pump, still in sealed packet. $200

Josh

0411742212

considering selling my 32, as i cbf anymore. Send me an offer via pm, might separate items but for now whole lot will be sold as a bundle.

32 gtst - defected shell. 5mm too low, can be easily removed with suspension listed below.

Comes with -

RB31DET. Specs are around here, built motor with low kms for its age.

rb25det gearbox

OS Giken twin plate clutch

single piece tailshaft

Nismo GT Pro 2 way adjustable diff

Also have -

32GTR bonnet - gunmetal grey in perfect nic.

32GTR copy front bar made to fit gtst.

3x Rb20det gearboxes - ones perfect, two need rebuild.

std KYB suspension set

2 x rb20det motors. - 1 long engine with all manifolds and turbo, other just head and block.

3" front dump + std catback and twin 2.5"

std tailshaft.

various panels (to fix drivers 1/4) including a set of dented GTR fronts.

If the right offer was made I would sell the lot in one go. Its all there to make either a track beast, or a street weapon.

Edited by Bl4cK32

Bathurst R32 GTR keyring official merchandise from the race - $30

62458_1510043544962_3625499_n.jpg

Bathurst R32 GTR framed picture approximately A3 size - official merchandise from the race - $50

47043_1510044984998_4239516_n.jpg

Gameboy Colour(clear purple edition) + Pokemon Red - $100

3071r .63 rear - $800ono (needs ex gate)

I don't really know what these go for soooo.

Used but decent condition, nearly no shaft play if any at all. Selling as it doesn't suit my needs but came with a car I bought. Will have it off the car next week at the latest. Will get pics once it's off.

And can do a part swap for a full rb25 turbo set up (lines, manifold etc) with cash my way or a 2510 also after an AM performance RB dump pipe screamer so can part swap for that too.

Have for sale:

steel intercooler piping for fmic, suit standard inlet manifold. $75

Standard RB25DET crossover pipe with standard bov. $40

Standard RB25DET manifold $75

Standard RB25DET front pipe $40

Dont need this stuff anymore, removed for upgrade. all in good condition.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
×
×
  • Create New...