Jump to content
SAU Community

Recommended Posts

Hey,

Time has come to sell my R32 as i am sick of it just sitting in my garage not being able to drive it anymore because of crazy work hours. Since i purchased it back in 2009 It has had a new motor put in as the last one had low compression on 2 cylinders when i bought it. While the new engine was out i decided to go all out with performance upgrades within my budget. The last time i have driven the car was in September last year, there is nothing wrong with it just because of work i don't get the pleasure of driving it anymore. Anyway here is the list:

***DETAILS***

- 1993 R32 Skyline (Type-M)

- Apparently 95,000km's according to Andy @ Autosolutions.

- Gunmetal Grey colour in good condition.

- 3rd owner in AUS

- Mechanically it is in great condition, the gearbox is in perfect condition, no crunching or synchro problems, those who have driven it will agree.

- Handles like its on rails, great turn in and grip, the only down side... you feel every bump in the road (However the coilovers are adjustable and this problem can be rectified if neccesary)

- Currently it has run out of rego but will come with rego on purchase finalization.

***MODS***

-Suspension/braking-

- Tanabi sus-tec pro front coilovers (Adjustable height, damper, body etc)

- JIC magic rear coilovers (Adjustable height, damper, body etc)

- Adjustable rose-jointed castor rods (Set to about 8 degree castor)

- Front and Rear whiteline thickened sway bars

- ZENITH Solid alloy rear cradle bushes

- ZENITH Solid alloy steering rack bush

- Large GTR type front strut brace

- R33 Lower control arms for more track and camber (Camber currently set to about -3 degree front)

- Type-M Brakes

- Braided brake lines

- Recently installed Lucas full-metal brake pads

-Power/drive line-

- GReddy Electronic Boost Controller - Low@12psi / High@19psi - 206kw

- HKS 2530 Turbo

- 600x300x75mm Front mount inter cooler

- Full 3 inch exhaust with front pipe/dump pipe

- Nistune ECU

- Larger Walbro fuel pump

- Heavy Duty Daikin clutch (Feels perfect, not rough like a button clutch, and has never slipped)

- Metal 'hot pipe' by Exhaust tech (Metal pipe inside the rubber induction pipe to prevent it collapsing under boost)

-Varex Exhaust Cannon - To keep control of the noise.

- Greddy Blow Off Valve plum backed into system (legal) and now creates a very nice flutter sound

- Pod Air filter

-Nismo Injectors

-OS Giken Cam Gears

-Z32 AFM

-New timing belt & ect were done when the new motor was put in.

-Cosmetic-

- GTR body kit, side skirts, wing and front bar etc

- Pumped fiberglass front guards

- Pumped and rolled rear metal guards

- 18 inch G-max dished rims 8.5" front, 9.5" rear (Unsure of exact offset, but pics speak for them selves)

- Tinted windows

-General-

- 360mm Black NARDI Steering wheel

- HKS pillar mounted boost guage

- C's Short shifter

- White vision H4 XENON headlights

- Cyclops Car Alarm and immobiliser (Key less entry, central locking etc)

- Kicker 6" Front | Kicker 6" Rear | Alpine 12" Sub & Amp

I am sure i have forgotten some stuff i will add later if i remember.

Problems with the car:

-Front bar has a crack on the bottom left corner.

-Power window switches work after a few attempts

-Left Headlight has a crack from a stone.<br style=""> -Bonnet lever broken have to open with pliers

Asking $14,200 O.N.O Contact: 0430 006 951

Pics from previous owner (havent taken much photos since purchased)

post-52714-0-73508000-1299028005_thumb.jpg

post-52714-0-23761000-1299028020_thumb.jpg

<br style=""> post-52714-0-64568800-1299028039_thumb.jpg

post-52714-0-27816300-1299028067_thumb.jpg

post-52714-0-85402700-1299028084_thumb.jpg

post-52714-0-40558300-1299028099_thumb.jpg

post-52714-0-05233600-1299028113_thumb.jpg

post-52714-0-30639300-1299028139_thumb.jpg

post-52714-0-97010200-1299028157_thumb.jpg

post-52714-0-61001500-1299028174_thumb.jpg

Edited by NizmoNigga
Link to comment
https://www.sau.com.au/forums/topic/355819-1993-r32-gts-t-type-m-adelaide/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...