Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Hey Andy, do you still offer installation at Ryde?

You did the install in my M35 last year.

I'd like to get one installed in my Evo which has a factory Sat Nav screen with TV.

Please let me know. Cheers!

Hey Andy, do you still offer installation at Ryde?

You did the install in my M35 last year.

I'd like to get one installed in my Evo which has a factory Sat Nav screen with TV.

Please let me know. Cheers!

Yes, Still doing the installs but not sure what I would find in an EVO..

Hi,

Any ideas if these Tuner boxes work in NZ ?, I know we have a strange audio codec here.

Cheers

Hi Michael, I believe they do. I have some config files (load by USB port) that allow for operation in most places with most systems. The samples I was sent last year didn't work here (was able to select all the European countries but they had wrong channel spacing) but fixed it with a new file in about 4 minutes. I'd be happy to give you money back if it doesn't work in NZ.

Cheers, Leon.

Hi Jason, welcome to the forums. PM replied.

Hey Commsman, the Asuka tuner, accessories, Relay (for reverse camera) and wiring diagram arrived safely on Monday. (One working day after payment was sent)

Thanks for shipping it so fast mate. Looks real nice, cant wait to do the install.

I'll let you know how i go.

  • 3 weeks later...

Sorry if the question has been asked, have only read 4/6 pages.

Does anyone know if a similar setup would work for a V36?

If your screen has an aux input then it should work. Do you have any pics of the factory tuner?

  • 1 month later...

Hi

I read elsewhere that these tuners may have a usb & sd card slot in them; or is that a different tuner?

If it is these, as I will be looking at getting one for my Stagea,

1: would you be able to run a nav program thru the sd slot, (as I have unlocked my navman and it runs garmin/tom tom etc off the micro sd card)?

& 2: Is the factory pop up nav screen touch screen enabled therefore utilising the nav program that I may run thru the sd slot?

Any suggestions if it isnt a touch screen are welcome.

Hi

I read elsewhere that these tuners may have a usb & sd card slot in them; or is that a different tuner?

If it is these, as I will be looking at getting one for my Stagea,

1: would you be able to run a nav program thru the sd slot, (as I have unlocked my navman and it runs garmin/tom tom etc off the micro sd card)?

& 2: Is the factory pop up nav screen touch screen enabled therefore utilising the nav program that I may run thru the sd slot?

Any suggestions if it isnt a touch screen are welcome.

G'day.

USB = yes, SD = no. These were supposed to come with SD slot but for some reason that didn't happen. USB is for loading new firmware (not likely you will need this), for playing media files & for recording live TV for playing back later. I would say most people would rarely use these functions.

To answer your other questions; 1 - no. 2 - no.

Suggestions.... CarPC with touch screen overlay (decent sized project) or portable GPS with suction cap for windscreen (much simpler project), lol.

The TV tuner has an AV input which other people have used to display GPS on the pop up screen. You just set up your phone to navigate where you want to go & then plug it in. Have a chat with Brad since you are in SA.

Thanks Commsman,

Bummer bout the sd slot, Oh well I'll just have to keep on using my unlocked navman; would of been nice to use the factory screen, much better than the 4.7" of the navman.

BTW I couldnt see the input on the pics of the asuka tuner and I couldnt understand the concept of rca > headphone plug????!!!

Your tuner should have come with a lead that plugs in as per this pic. The part that goes into the tuner looks like a stereo headphone plug.

post-76144-0-47534700-1319690484_thumb.jpg

If you can get an output from your phone to mate up with it, you will have GPS on your nav screen as soon as you apply 12V to the yellow wire. I hope that makes sense. Let me know if you need more info.

Cheers, Leon.

Edited by Commsman

Your tuner should have come with a lead that plugs in as per this pic. The part that goes into the tuner looks like a stereo headphone plug.

post-76144-0-47534700-1319690484_thumb.jpg

If you can get an output from your phone to mate up with it, you will have GPS on your nav screen as soon as you apply 12V to the yellow wire. I hope that makes sense. Let me know if you need more info.

Cheers, Leon.

Ah-ha your pic looks different to the pic on the first page of this topic, its missing from the preview.

I cant use my phone for a gps, I'm poor and only have a K1, hence why Im using a Navman.

Its starting to make sense now. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...