Jump to content
SAU Community

Recommended Posts

Realy need help miss my beast so much. One day my car just wouldnt turn over, the car cranks but wont fire, all lights are on and looks fine on dash. have tried the follwing.

1. tried jump starting - not working just cranks not firing.

2.checked the fuel pump,removed it and its working,its priming when you try start it - but weirdly checking for flow i , removed the fuel line that goes to the injectors and fuel was not coming out when was trying to start it , but we have tried to manually pump fuel into the manifold from a container but still wont fire.

3.checked all the fuses and relays all look fine.

4.did a spark check and therz spark.

I need help to check the following stuff, i think it might be 1.ecu , 2.airflow meter 3.crank angle sensor.

please any ideas would be usefull or even a commendable mechanic,or import garage around the Melbourne S.E

so the fuel pump is priming but there is no fuel coming out after the fuel filter ?

the pump is either dead or the filter is blocked, also check the quality of the fuel in a clear container

2.checked the fuel pump, removed it and its working, its priming when you try start it - but weirdly checking for flow, i removed the fuel line that goes to the injectors and fuel was not coming out when was trying to start it, but we have tried to manually pump fuel into the manifold from a container but still wont fire.

So, is fuel being pumped or not? As DVS32R suggested, the filter could be blocked (well and truly!).

No point having fuses "look ok". You need to check them with a multimeter (ohms setting) to be absolutely sure. If you are getting spark, then the CAS is ok.

And "turn over" and "crank" are the same thing.

yeah fuel pump definitely working coz i took it out and tested it myself , yeah that's a good idea will check the fuel filter tomorrow,, any other ideas or mechanics / garages to take it please. I don't want to get the car towed to a garage where they wont be able to fix it, therefore would prefer garages that deal with imports, as we all know towing is nuesense

checked the fuel filter def not blocked , its flowing well, the fuel filter is also less than 3months old.... i dont know most probably fuel pump not getting enough voltage it requires, is there anyone with an idea how much voltage/amps i should get on the multimeter for the fuel pump.

Minimum 12v hopefully. If it primes it Is

Pumping. Check that fuel is

Coming out the fuel filter by turning the key on or cranking with the outlet ofthe fuel filter into a clear bottle.

Check the fuel doesnt have water contamination etc.

if ur not sure get a long bit of wire good idea with a fuse and power up the pump with a jump lead from power to the pump if need me. if there is no power of fuel getting to the injectors there is ur problem, have u ever had the injectors cleaned...have u check coilpacks??

motor needs, power, fuel and spark to start check them all first

Guys any ideas please DVSR32R thank you very much for ongoing support, i have tried to crank the car with fuel outlet into a clear bottle, really weird but honestly therz no fuel coming out,so iam thinking may be fuel pump not having enough power to deliver fuel at sufficient pressure.therefore wanted to ask if its possible to check the voltage goin to the fuel pump by checking the voltage going to the fuel pump on its fuse? i know its also possible to do that on its relay , but relay terminals confuse me a bit..... am also queering injectors, any ideas how to check injectors for (power + flow) ? thanks everyone

are you certain you are checking for flow at the right fuel hose? you need the one that does not connect to the fuel pressure regulator, ie the one with the filter in it. where are you disconnecting the fuel hose to check?

Yep thats right.

Check battery voltage,

Then check fuel pump voltage At the pump itself. Should be similar to batt volts

U have had the fuel pump out. Check to nake sure the 2 hoses were put back on the correct way around.

Take the fuel line off before the filter and check the flow see if its any better. If its no good get a new fuel pump

It's still unclear whether or not you have fuel, and when.

With fuel line disconnected after the fuel filter, what happens when:

- turn key to ON?

- turn key to START?

can it be a the ignitor thats gone?? even though i got spark ? also were do i find the earth , just going through everything at the moment , replaced fuel pump, now got fuel flowing still not firing, any electrics that can cause car not to fire?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...