Jump to content
SAU Community

Charcoal Canister

OMY31T

By OMY31T,
in Engines & Forced Induction

 Share

Recommended Posts

OMY31T Rising Star

OMY31T

Posted
Posted

hi guys, just wondering if anyone knows where the line that runs down under the passenger side goes??. it runs along the inside of the chassis and into a square plastic box attached to the rail, does it stop there or run up inside the rail somewhere(it runs to the bottom of the canister). next question can it be disconnected easily at the box point, i need to cut this steel line at the firewall as im re-locating the canister up near the wiper motor before i do my new turbo install.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/356889-charcoal-canister/
Share on other sites
t_revz Grand Master

t_revz

Posted
Posted

hi guys, just wondering if anyone knows where the line that runs down under the passenger side goes??. it runs along the inside of the chassis and into a square plastic box attached to the rail, does it stop there or run up inside the rail somewhere(it runs to the bottom of the canister). next question can it be disconnected easily at the box point, i need to cut this steel line at the firewall as im re-locating the canister up near the wiper motor before i do my new turbo install.

cheers.

pretty sure the line that goes into the chassis rail on lh side stops there. think its just a fitting with nothing on the other side and it just breathes into the rail

t_revz Grand Master

t_revz

Posted
Posted

I thought it went back to the fuel tank, and is a breather for the tank?

theres a hard line that finishes near clutch booster on rh side, short hose then across firewall and to canister, then one goes from canister up lh side into plastic fitting in chassis rail. think either nothing on other side or short hose.

OMY31T Rising Star

OMY31T

Posted
  • Author
Posted

ok, ive already modded the one that runs under the right hand side. there is one breather in th chassis rail basically under the canister, thats why i wasnt 2 sure if it was another breather. ill have 2 get a better look, car is low :P hard to get under. ill have 2 whip out the jack 2 morrow. but thanks 4 the replies.

  • 3 weeks later...
ARTZ Grand Master

ARTZ

Posted
Posted

Can i hijak this thread for a econd to ask why the charcoal pours out of the bottom of my can, is this normal..

i was going to refit it but soon as i turn it right way up it all pours out the bottom..It was off the car when i bought it so I dont know..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...