Jump to content
SAU Community

Recommended Posts

My car seems to be having some serious issues here

Was driving to the drags one evening and it suddenly just stopped working

(thank god it didnt happen on the drag strip)

It refused to start even when my friend helped me to jump start it

Towed it to the workshop and they told me they had spark but the injectors seems to be flooding the engine and the only thing they could think of is the ECU is ****ed. The workshop is going to be closed for the weekend so they said they'll test the ECU on monday

Recently before the incident Ive been having problems starting the car

sometimes I had to put some gas into it before it would crank over

and also a few days before I had a bosch 910 installed without a FPR

and exhaust cam gear set to 4Deg retard

So any ideas?

just incase it maters my car is a 1996 R33 Series II Auto

Here's the list of mods I currently have

S-AFCII

Profec B boost controller

Bosch 910 (no FPR)

HKS Exhaust Cam gear

Trust Cat-back

SS high flow cat

Front pipe

Trust V-SPL intercooler

Apexi Air Filter

cheers

Link to comment
https://www.sau.com.au/forums/topic/35704-engine-flooding-problem/
Share on other sites

  • 1 month later...

I dont think you need a FPR...

Could be stuffed injector stuck open... be carely that you havent filled you cylinder/s with fuel and may have compression locked your motor .... pull the dip stick out and check to see if it smells like fuel??? It s not a common thing - but it does happen, trust me ;-<

Dan

Pump the throttle???

1. efi cars are ment to be started with the foot off of the throttle

2. would pumping the throttle actually do anything?? - its not like an old carby that opens up secondary squirters when pumped.

3. when you said you had a pump installed without a FPR, do you mean you removed the standatd/afrermarket FPR on the fuel reguator? if so why??

4. This may not explain why it flooded, but it indicates a few problems.

well it wont start with or without throttle

and the standard FPR is still there

When I installed the fuel pump my workshop said it might blow the standard FPR because of overpressure. How does that make sense? doesnt the FPR control the pressure?

IMACUL8:

checked out that possibility as well but its not compression lock

but havent checked the injectors though

If the engine is "flooded", you need to try and start with the "pedal to the metal" - this is to allow as much air as possible in to help ignite the fuel. DO NOT pump the throttle - that only adds "acceleration" fuel, and worsens the situation.

If the CAS was crook, you would not have spark.

I have been running the standard FPR in my 32 with a Bosch pump, and no problems encountered for nearly 2 years.

Can you hear the injectors working when trying to start the engine?

You are probably going to have to pull the injectors, so arrange to get them cleaned while they are out.

  • 2 weeks later...

BACK ON THE ROAD!

turns out the CAS was electronically alive but mechanically dead!

and the little stick at the end of the cam shaft had snapped

oh well got HKS 256 in there now

when the engine is warm the cams are kinna noisy

is this normal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...