Jump to content
SAU Community

Recommended Posts

.

agreed........

so i got rear ended by a drunken one eyed bogan in a commondoor on Torrens road last night while on my way across town to see ralf.

the dumb bastard decided he could do a runner........(in hind sight i shouldn't have chased him, but the heat of the moment kinda took me)

so i finally got him to pull over in what he said was his drive way (lies), preceded to tell me the damage wasnt his and that he didnt do any of it. and that he has no insurance and that i should just walk away and my lifes not worth it....really?? geebus.......frackin local bogans. needless to say i drove around the corner and called the Police. while on the phone to the popo he drove past again all over the shoppe.

The wife took the crappy ass wing off her R33, other than that its going well. the Hicas light has started coming on over 80kmh etc. also needs inner tie rods outter ball joint thingos and lock bar for the hicas or a driftworks eliminator kit so not sure which way we will go yet. not long ago got a mongoose alarm fitted by Chris Rogers and very happy with his work and the alarm:)

The Cressida finally has some work happening! getting an Emanage Ultimate and a genuine head gasket for the 1jz and started pulling parts off the motor getting ready to remove it to see why it pumping oil. also got some R33 calipers and BA falcon rotors for the brake upgrade ready to go.

I can't wait to drive a real car again instead of my hail damaged festiva which is doing well, just replaced a couple of bushes tonight

Sorry to hear about being rear ended Boiracer that sucks!

bloody bogan commos...

If people are keen, this thursday we are going down to carseldine @ 7:30. The morayfield grp will meet at the bp@7 and head down.

I got work at 8:45 so ill leave around 8:30

just picked the car up.. Only made 320hp which is a bit disappointing. Supposedly had a poor batch of fuel which didnt have enough timing in it.

Mind you upgrading from 240 to 320 is still a nice jump and car has a nice smooth power delivery to it.

HICAS eliminator kit adds to a nicer drive as well.

Will have dyno graph tomorrow as today is a Public Holiday for those brissie folk

just picked the car up.. Only made 320hp which is a bit disappointing. Supposedly had a poor batch of fuel which didnt have enough timing in it.

Mind you upgrading from 240 to 320 is still a nice jump and car has a nice smooth power delivery to it.

HICAS eliminator kit adds to a nicer drive as well.

Will have dyno graph tomorrow as today is a Public Holiday for those brissie folk

nice :thumbsup:

just picked the car up.. Only made 320hp which is a bit disappointing. Supposedly had a poor batch of fuel which didnt have enough timing in it.

Mind you upgrading from 240 to 320 is still a nice jump and car has a nice smooth power delivery to it.

HICAS eliminator kit adds to a nicer drive as well.

Will have dyno graph tomorrow as today is a Public Holiday for those brissie folk

yeah I know that feeling, where did you get it tuned?

In Brissie, not big on naming names....

Its more to do with the car than the tune i think

Not willing to name the tuner that is a bit odd...I am looking for a new tuner guess I will just do what everyone else does and take it to EFI.

Why's that Clint???? Just because Peter's not interested in tuning hand granades. What do you think EFI will do for you, that we haven't already done?????

Nothing wrong with a second opinion Brad, Sean did my last car and I wouldn't mind putting a Nistune in to see if the Power FC is the issue before I go spending another $1200 on tuning.

I get the SAU member discount down at EFI for a fit and Tune of the Nistune.

How is the car a hand grenade? I have taken Peter's advise at every turn he is the only person to work on it since purchase apart from an oil change and plugs I have done, just trying to eliminate potential issues 1 at a time.

If I had cash up my sleeve I would buy a Haltech but lets face it House trumps car, I am exploring options on what I can do and a Nistune that is $1k is cheaper while retaining factory R&R protection of the engine rather than retuning a potentially faulty Power FC and it playing up.

To rule the AFM out I will get it retuned wither with another Z32 AFM or the stock unit.

I have sent many of the local skyline owners Peter's way and have also recommended your work as well, I think that as a car owner I am entitled to look at what options are available to me based on my budget so at least I am aware of what is achievable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...