Jump to content
SAU Community

Recommended Posts

Hi,I've a 1998 Nissan Skyline R34 GT-T with an automatic transmission.I'm looking to modify it,I've been doing alot of research and spoke to a couple Japanese Imports Specialist like C-Red and Imports 101 here in Perth.They told me because my car is an automatic,the stock ECU is a little more restrictive compared to the manual one.Recently,I've been looking at Nistune.C-Red told me that they wouldn't recommend it for an R34,and likely to have problems with tuning in the long run,it's better to go for a piggyback ECU like Haltech or something which would cost around $2,000 to $3,000 mark.On the other hand,Imports 101 told me that the Nistune is quite reliable and alot cheaper compared to the piggyback (only around $1,200 fitted and tuned).It's true that you could have problems with it in the long run but very rare or unlikely.At the moment

I have podfilter,catback exhaust and a front mount intercooler and I'm running 11PSI boost,they told me if I want to stick with the stock turbo,you could be looking at around 200kWs at the wheels.

What do you guys suggest ? Should I look for brands like Motec,Apex'i or something ? Thanks

Edited by Jeremy1607
Link to comment
https://www.sau.com.au/forums/topic/357580-aftermarket-ecu-for-r34-gt-t/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

This Tuner sounds a bit dodgy at best...

A haltec is NOT a piggy back ECU, it's a complete ECU, and from what I've read won't work so well with the automatic.

I'm fairly sure that NIStune is the only ECU that will handle the auto.

nistune is NOT unreliable, NOT hard to tune and the cheapest and best option.

I've got it in my GTT running dual maps PULP98 and E85 making 290rwkw .

the 200rwkw mark is correct for the stock turbo.

Pretty sure there is another thread exactly the same from you. We answered in there.

Its garbage, stock ECU is the best for an automatic. You can modify all the factory automatic settings. Nistune is an excellent solution and great value. I am running it with no issues and 280rwkw. There are guys with 400rwkw+ running it.

NIStune all the way, stay away from CRed, so not happy with their Haltech install on my wagon and the butchering of my loom they did.

Removing it in favour of NIStune (had a hiccup with a spare ECU that didn't work :( ) soon.

Send me a PM, I can get NIStune boards and I have a mate that fits them for me and will probably work for alcohol :)

Further to things said above, Haltech is not a piggyback BUT when fitting them to our auto cars (my engine/transmission setup is pretty much the same as yours but 4WD) they have to be wired in as a piggyback. The TCM isn't a seperate unit like the older autos, it is part of the ECU which means the stock ECU has to remain to control the gearbox. This is how mine was done and they did some other dodgy stuff like changed the water temp sensor to suit the Haltech which screwed up things controlled by the stock ECU that need certain temperatures to operate (VCT for example, would never engage because the stock ECU was seeing the water temp as 65deg instead of 85deg).

Also, my NIStune tuners of choice in WA would be Hyperdrive and AllStar Garage.

Edited by bubba

Okay,thanks.I will look around again and find out more information.

Do any of you know what's the maximum power you could get from the stock turbo ?

I want it to be as powerful as possible but at the same time I want to keep it safe for the engine (like if you run 16-18PSI on the stock turbo,the engine block can't handle it and it could blow up) and good fuel efficiency.

Dangerous territory bloke, this is probably the most common question asked on this forum. Do a search or look through the rb25 dyno results thread.

Max power on standard turbo is roughly 200rwkw, max safe boost is between 10-12psi.

Haha yeah I know,that means if I want anything more powerful than 200kWs.I need to go for a bigger turbo ? I'm running 11PSI at the moment.

Are there any other ways to make more power with the stock turbo or 200kWs and that's it ?

if you want more power than 200kw you will need a bigger turbo. that's the basic answer. and as far as fuel economy and reliability it's impossible to have them both with more power. as you make more power you WILL use more fuel. it's simple. to get more power your car must consume more air and more fuel to make it. and of course more power puts more stress on your engine so yes reliability will be reduced the more power you make. look at something like a GTRS bolt on kit. that will give you an easy 250kw. and yes the nistune is the best option for an auto R34.

Yeah,I understand.What's a GTRS bolt on kit and where can I find more information about it ?

And is nitrous oxide even legal to use on a car ?

Maybe I should for the Nistune first then (to make around 200kWs) ?

the turbo is made by HKS and it's called a GT-RS

if you google for GTRS youll find tons of pages of random crap

if you browse in the turbo upgrade section you should plenty of RB25s with GT-RS fitted

but its not a cheap upgrade

you need to upgrade

fuel pump

injectors

airflow meter

nistune

tune of nistune (or whatever option)

turbo kit itself

tyres

intercooler

so whilist the turbo kit may only be 2.5k the other stuff really adds up

Haha you mean,I should do research on my own regarding the GTRS bolton kit ? Okay,will do.

Just type in GTRS into the search field in the Forced Induction section and you will get heaps of info. Way more than a few people replying to your post here.

To be honest I dont recommend the GTRS kit, quite expensive and looses the factory appearance so cops can get you in trouble.

Get a hiflow turbo, GCG or Hypergear etc. Not to mention these will just bolt straight back on plus the fact they have factory appearance and about half the price of a HKS kit. Just saying this has all been discussed over and over before. So much info on here.

Okay,cool.Are there any other cheaper options that I can look at then ?

I mean $7,000 just to get 250kWs isn't worth it.If it cost $7,000 just to make 250kWs,how much would it cost to make around 300-500kWs ?

Hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...