Jump to content
SAU Community

Recommended Posts

  On 31/03/2011 at 5:32 AM, R31Nismoid said:

I'd cost at LEAST $200

You're an expensive man haha

Idealy looking at it this way. f**king piss job:

- 6 bolts on turbo and 2 on the cat - remove

-Take off dump/front

-Place new dump/front pipe in same location

-Replace said 6 bolts and 2 bolting to the cat

-Yaay

Dont see how its a $200 job in the slightest :P

  On 31/03/2011 at 5:32 AM, R31Nismoid said:

$50 to get a dump pipe swapped?

Tell me where! They cannot be making money on that. I'd cost at LEAST $200

I supplied all parts and got mine fitted along with oil in box and diff changed for $150..Guess I got lucky. :D

I did try do it myself but bolts on the cat were rusted on good and proper, needed an oxy to get them off. Aside from that it is an easy job.

  On 31/03/2011 at 5:23 AM, Arthur T3 said:

you never heard of an exhaust shop mate, they have things called hoists that lift cars up and make jobs like this really easy, shouldnt cost more than 50 bucks.

you ever heard of trying to save every bit of cash and being a tight nit community help a member out?

$50 bucks is a freaking bargin. when i had my 34 i went to Daalder exhaust in box hill and they quoted me close to $200. same as other exhaust places would quote me $150-$200

charles cant remember if i replied to your sms or not lol (phone in car cbf checking) but i might be free next saturday. if not then it will be on the 23rd cause ill be in sydney for Armin on the weekend befroe that YAY lol

and dont worry bout payment dude.

easy big fella. im all for helping a brother out dont get me wrong here, but you gotta admit that crawling around on my back in the dirt trying to fix an exhaust is never fun .

Maybe if you were as friendly with your local exhaust shop or mechanic wshop as you are your "tight nit communtiy of fellow forum members" you might find he doesnt rip you off so much.. so what if daalder quoted you 200, did you ever think to shop around?

If you cant at least attempt to tackle a job as simple as a front pipe on your own you may as well learn to start paying professionals. No offense intended charles, but this is a really simple job . There is 8 bolts holding it on, 9 including the o2 sensor. All you need is a basic set of metric spanners,a jack and some wd40. The only time it gets really tricky is when the bolts are rusted in hard in which case you will need an oxy and Ashneel wont be able to do that in your driveway ( unless he carries an oxy :) )which means you will need to take your car to a workshop of some sort.. If you cant do this on your own then maybe backyard mechanics isnt for you and you might as well start getting friendly with your local community of automotive workshops.

Anyway my advice is go buy a set of spanners and some wd40 and have a go youll be surprised how easy it can be. Then not only will you have a new front pipe, you will have a sense of pride yu did it yourself, a new set of spanners, half a can of wd40 and the knowledge to know you can do it all again

As the old saying goes, give a man a fish, feed him for a day, teach a man to fish , feed him for a lifetime.

  On 31/03/2011 at 9:06 PM, ashneel said:

you ever heard of trying to save every bit of cash and being a tight nit community help a member out?

$50 bucks is a freaking bargin. when i had my 34 i went to Daalder exhaust in box hill and they quoted me close to $200. same as other exhaust places would quote me $150-$200

charles cant remember if i replied to your sms or not lol (phone in car cbf checking) but i might be free next saturday. if not then it will be on the 23rd cause ill be in sydney for Armin on the weekend befroe that YAY lol

and dont worry bout payment dude.

Nah you didn't reply, but that's cool lol.

Next Saturday would be awesome! But I have work until 4, can I come straight to yours after that? :D :D

  On 31/03/2011 at 11:42 PM, Arthur T3 said:

As the old saying goes, give a man a fish, feed him for a day, teach a man to fish , feed him for a lifetime.

Man cannot survive on dump pipes alone! I'm all for DIY if it's piss or you plan on repeating the task, but if it's a job he's only going to do once in his life...pay the professional. Dump pipe is easy in your eyes but some people don't change their own oil let alone exhaust components :)

  On 02/04/2011 at 3:44 PM, Birds said:

Man cannot survive on dump pipes alone! I'm all for DIY if it's piss or you plan on repeating the task, but if it's a job he's only going to do once in his life...pay the professional. Dump pipe is easy in your eyes but some people don't change their own oil let alone exhaust components :)

Think I had a a bit too much coffee on that day ,went off on a bit of a rant.. :whoops:

todays effort kinda put my DIY skills to shame :(

i did find a few clamps not as tight as they could of been . If that has fixed the problem im not 100 percent sure yet. I only got it running that morning so guess thats price i pay for rushing it.

Anyway im so annoyedf for spilling petrol all over my fresh paint and effing it that its coming apart again and getting powdercoated, Ill get the tune checked out again then..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...