Jump to content
SAU Community

Recommended Posts

Ok I just got word back from my ‘mole’ inside DoTaRS that there are some MAJOR changes planned for SEVS regarding vehicle emissions, and what’s worse, some of them will be retrospective and will apply to cars already complied!

1) Like the NZ import scheme, SEVS eligibility will soon be limited to cars that meet the Japanese ‘TA’ emissions scheme or later if they’re ex-Japan (that means no cars prior to about 2001 will be eligible for import). For the Skyline range, this will rule out all R32s, all R33s and virtually all R34s (did any R34s meet TA regs or were they all GF?), but V35 and V36 will still be ok. Evos prior to Evo 7 will be out. Supras will all be out. JZX100 Chasers will be canned, but JZX110s will be ok. US-built vehicles are not affected because their emissions regs are stricter than ours anyway.

2) Cars ALREADY imported under SEVS will be tracked down via NEVDIS (the national database for vehicle identification) and owners contacted. The plan is to make owners submit their vehicles for annual emissions inspections to ensure that their vehicles meet the regulations they were complied under. Cars complied under the old scheme prior to SEVS will be exempt, as will cars imported under the pre-’89 rule.

3) The plan is to move SEVS more in the green-car direction, so they will soon allow hybrid models of cars already sold here in Australia to be imported – for example, the Tarago is sold in Japan as the Estima Hybrid, that will be allowed for import.

Well there goes my business, unless I move to Nimbin and use the tree huggers as my new target market... :down:

Edited by Iron Chef
Link to comment
https://www.sau.com.au/forums/topic/359421-changes-to-sevs-in-the-pipeline/
Share on other sites

any ideas on timing for this chef? i.e. can we go import crazy now on pre 2001 cars until this is made official?

better be an april fools f**ker

If its true tho Rhys, will it be worth owning an import that you can modify only basically so it passes emissions once a year?

Well it is actually closer to the truth then an april fools joke, many submissions (LINK) have been put forward for a few years now including as below from the Australian Automobile Association about 3 year old max cars to be imported.

Then you have the current submission LINK of the NSW MTA (image below) that if you are not a dealer you should only be allowed to import one car a year (it was one car every 2 years).

Its coming that is guaranteed, just look at the changes to Pre 1989 model cars and Personal Imports.

post-5805-0-48794900-1301627171_thumb.jpg

post-5805-0-74203000-1301627846_thumb.jpg

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

For the record, PRIMO passed on a copy-and-paste of my info to my agent in Japan, and from there it went around the auctions like wildfire, till I got a panicked call from another agent I use in Tokyo asking what the hell was going on! Evidently April Fools isn't a big thing in Japan, making them all ripe for the picking haha

sounds like you got a VERY STRONG bite out of it.

mind you ADR 79/02 is going to shake a few people. anything after 2008 ( I *think*) has to pass that one to gain entry.

as for the emmisions gag - like that one. reminded me of the drive by emmissions tests in california.

I think DoTaRS are taking a closer look at it Chris, particularly as Japan has changed its testing procedures for emissions in recent times to be more like what they do here.

The biggest issue is the cost of the test itself for late model cars, I've heard figures of $30-40K bandied about, which makes it bloody hard to recoup those costs without charging a crazy amount for compliance. Ideally, we want DoTaRS to recognise the Japanese testing procedures as being valid here, once that's done, it will be a matter of providing the Japanese emissions paperwork to pass, same as they do with cars from the US now.

Edited by Iron Chef

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...