Jump to content
SAU Community

Recommended Posts

Covered a million times on here before and i have done a search as well..

But basically my new r33 gtr skyline's injectors are leaking from around 3 of them, 2 being at the top of the injector and the other from the bottem..

One of the ones that leaks from the top (nearest to front of engine) just pours out constantly..

Whats the best solution to curing this? car is stock with stock injectors.

Should i just take it to an injector specialist in bunbury (although i dont any) can anyone reccomend anyone? so they can clean and put new seals on (hoping that they are not cracked) and clean them...

Or should i just buy later injectors off a r34 gtr???

Link to comment
https://www.sau.com.au/forums/topic/359712-leaking-injectors/
Share on other sites

GTR injectors will always leak eventually. If you bought new ones, take them back for a refund. If you bought second hand ones, then buyer beware. If you buy another set of GTR injectors, they will ALSO leak eventually. They all do, there is no way to fix them.

Before ditching them, though, check the top and bottom seals to be sure it is the injectors fault. Usually they leak from the small holes near the top on the side when the car is running. They will not leak when the car is not running.

They would leak when engine is off due to fuel pressure left in the pressure side of the fuel system.

Once the pressure has escaped it should stop. If it's definately not the orings and it is the injectors, might be a good time to get some new injectors (bigger) and a tune to suit?

If you turn the key to the on position and you start getting leaks, then try replacing the o-rings first. Replace both top and bottom. You can get these from any injector cleaning place or mobile guy or from Nissan at approx $1 each I think (I don't know exact price as I buy them in bags of 200)

If the injectors leak from the small holes on the side near the top, then they are fubar and you will need to buy new ones.

For a basic street car, just get some siemens ~500cc and a Nistune or something equivalent. If you are after something more serious, talk to your tuner or mechanic more about the size they recommend and the brand they recommend.

Just turned the key to the on position (without the engine running) and straight away fuel on 3 of the injectors started to leak fom the top down does this mean it will be the o rings then?

If its right at the top near the rail then yeah, probably o-rings. If you're not sure, just change them anyway because they're cheap and its an easy job. Search the DIY - i did a write up. Interestingly, i had to remove my rail recently and just pulling it out and reinstalling it was enough to kill 2 orings FFFUUUUU.... Probably should have pulled all the injectors out of the rail and re-lubed them.

  • 3 weeks later...

Well today my injectors coem from america..

Anyway used the guide on here to fit em all is well on idle..

As soon as i just drive normally it has a miss like its trying or should i say nearly running on 5 cylinders, put your foot down and that goes away although on full boost boost it does leave a cloud of black smoke which it didnt used to do...

Anyway my question is does this mean one or more of the new to me std gtr injectors aint flowing enough??

Should i just take em all of again and get em flo tested or could this be somat else?

Note it didnt miss like this when the old leaking injectors were in...

As soon as i just drive normally it has a miss like its trying or should i say nearly running on 5 cylinders, put your foot down and that goes away although on full boost boost it does leave a cloud of black smoke which it didnt used to do...

Anyway my question is does this mean one or more of the new to me std gtr injectors aint flowing enough??

Should i just take em all of again and get em flo tested or could this be somat else?

Note it didnt miss like this when the old leaking injectors were in...

What boost are you running? Are the replacement injectors new or used?

Black smoke = rich mixture, which you'd expect on a stock ECU, especially if you've raised the boost.

GTR injectors will always leak eventually. If you bought new ones, take them back for a refund. If you bought second hand ones, then buyer beware. If you buy another set of GTR injectors, they will ALSO leak eventually. They all do, there is no way to fix them.

Before ditching them, though, check the top and bottom seals to be sure it is the injectors fault. Usually they leak from the small holes near the top on the side when the car is running. They will not leak when the car is not running.

I also think so.

  • 9 months later...

If you turn the key to the on position and you start getting leaks, then try replacing the o-rings first. Replace both top and bottom. You can get these from any injector cleaning place or mobile guy or from Nissan at approx $1 each I think (I don't know exact price as I buy them in bags of 200)

Just tried this out then and i can hear a leak coming from the first injector, I cant really tell weather it's coming from the top or bottom though.

I cant visually see or smell fuel but just a leaking air sound?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...