Jump to content
SAU Community

Recommended Posts

Hi All,

Just looking at next steps and how to push things from my current 279rwkw (hypergear hi flow turbo with return flow intercooler and standard piping).

I am wondering what power people have made with a return flow intercooler and standard piping inside the engine bay?

Possible areas of restriction are the 2.5" cold pipe and the fact that the cold pipe and hot pipes are right next to each other.

Any help much appreciated!

Seen a certain brand of return flow max @ 270rwkw recently on a car that was done.

That said - you shouldn't be asking the question, you should be testing it.

Measure boost pressure turbo outlet, measure pressure near the plenum.

No point trying to theorise something like this as there are many factors to take into account. Testing will tell you without a doubt if there is a problem or not.

Eeeeeeeee

Eighty

Five

Yup thats the plan just dont want to find out that the setup is restrictive so I couldnt get the most out of E85. Trent was saying they did an RB30 with a GT35 and 0.63 rear and it only gained 10-20 rwkw with E85, but I attribute that to the stupid 0.63 rear on an RB30!

piping is not really going to make a diffrence look at ripsfed he is running 2.5" from turbo to intercooler then 3" to throttle and god knows how much power he is making im running 2.5" from turbo to cooler then 3" from cooler to throttle body

260 to 307 when I converted to e85 plus tomei cams on less boost and im still using air box and jjr return flow cooler so you shouldnt have a probelm I would expect you to make around 310-315kw mark

Seen a certain brand of return flow max @ 270rwkw recently on a car that was done.

That said - you shouldn't be asking the question, you should be testing it.

Measure boost pressure turbo outlet, measure pressure near the plenum.

No point trying to theorise something like this as there are many factors to take into account. Testing will tell you without a doubt if there is a problem or not.

Yeah I understand, my hot intercooler pipe is currently getting a fitting welded onto it so I can measure the pressure before the intercooler. I also just purchased an infrared thermometer so I can measure the temps at different stages along the piping.

More just interested to hear peoples stories of how much power they are making through a return flow intercooler with standard piping.

piping is not really going to make a diffrence look at ripsfed he is running 2.5" from turbo to intercooler then 3" to throttle and god knows how much power he is making im running 2.5" from turbo to cooler then 3" from cooler to throttle body

I am assuming both of you are not running return flow type intercoolers though where the pipes run side by side, plus my intercooler to throttle is also 2.5".

Yeah I understand, my hot intercooler pipe is currently getting a fitting welded onto it so I can measure the pressure before the intercooler. I also just purchased an infrared thermometer so I can measure the temps at different stages along the piping.

More just interested to hear peoples stories of how much power they are making through a return flow intercooler with standard piping.

Depending on where the piping is it could be sucking up radiant heat.

Doesn't mean the air inside the pipe is the same temp though... That again, needs to be used with a in-pipe sensor to really get a good idea. You'll get an indication yes, but given you weld a bung in anyway to test pressure - not hard to have it dual purpose and get it 100% accurate.

260 to 307 when I converted to e85 plus tomei cams on less boost and im still using air box and jjr return flow cooler so you shouldnt have a probelm I would expect you to make around 310-315kw mark

Great to hear, I believe you have the 0.63 housing as well? I am concerned as my current turbo cant make any more boost so I am worried that will limit the E85 conversion power increase.

Great to hear that you have a JJR return flow cooler and an airbox, thats exactly the info I was after! thanks!

I run a Blitz return flow on my 34 and it has no problem with 350rwkw on E85

Great news thanks! Do you run the standard intercooler piping? Is there anywhere I can read up on your mod list?

Depending on where the piping is it could be sucking up radiant heat.

Yes good point although if the pipe is super hot on the outside some of that heat is passed on the air flowing past.

Great news thanks! Do you run the standard intercooler piping? Is there anywhere I can read up on your mod list?

stock 25NEO

3076 .82 rear .6 front cover

E85

1000cc injectors

044 intank

running 27psi :whistling:

Power FC

Blits Return flow cooler.

As paulr33 said. the exhaust will be a restriction before the cooler pipes will be..

Yes good point although if the pipe is super hot on the outside some of that heat is passed on the air flowing past.

Some yes - but the difference could be quite significant, meaning what you are reading on the pipe exterior essentially is useless information until you know whats going on inside.

Remember @ peak, 280rwkw there is a fair bit of air flowing (45-50lb/min IIRC). It's mostly going to be driven temp wise by how much work the cooler is doing, which is inturn also affected by how much pressure drop - or rather restricton - there is from turbo outlet to intake.

stock 25NEO

3076 .82 rear .6 front cover

E85

1000cc injectors

044 intank

running 27psi :whistling:

Power FC

Blits Return flow cooler.

As paulr33 said. the exhaust will be a restriction before the cooler pipes will be..

Hahaha love your work! Im happy to run some big boost too, but damn 98 fuel and this turbo wont allow me anymore!

What exhaust do you run?

I am assuming both of you are not running return flow type intercoolers though where the pipes run side by side, plus my intercooler to throttle is also 2.5".

yeah sorry my bad im still running the standard cross over pipe aswell to go with the standard throttle body until i can afford a aftermarket throttle body. but your right im not running a return cooler only thing i can suggest is maybe run some ceramic tape on the piping where the they are close to each yes it doesnt look the best but if its performance your after it could keep the temps down i might be wrong but thats just my opinion

Great to hear, I believe you have the 0.63 housing as well? I am concerned as my current turbo cant make any more boost so I am worried that will limit the E85 conversion power increase.

Great to hear that you have a JJR return flow cooler and an airbox, thats exactly the info I was after! thanks!

yeah 0.63 and as I told you before aswell im dropping boost aswell from 17 to 14 and still get that power so you will make it no worries, sure youll make more if you hold boost but yeah thats another problem to be solved.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 馃槄
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 馃珷    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
  • Create New...