Jump to content
SAU Community

GCG Hi Flow for GTS25t

R33NT

By R33NT,
in Engines & Forced Induction

 Share

Recommended Posts

Roy Grand Master

Roy

Posted
Posted
I am told that the new hiflowed turbo they do for around $1800 is equivelant to a GT3040

See the posts by B-man, he had a GCG rebuilt turbo that was meant to be a rough generic equiv to a 3040. It made great power up to 250rwks with a wack of boost...but then bolted on a HKS (ok so different to Garret but...) and got an extra 50-75rwks, so i dont think it is really an equivelant.

Good power, but 3040 power maybe falls a bit short... check B-mans posts

BHDave Grand Master

BHDave

Posted
Posted
What sort of boost response would the 450 HP highflow have on an RB20DET?

I dont have a stage 1 but i have a stage two on RB20 with no tuning so you can atleast get an indication.

Mine starts to gradually build boost from about 3k, has 5psi by 4k, hits 7 by 4200 and then rockets to 11psi (i haven't upgraded fuel yet so am pegging it there at the moment) I have exhaust, cooler and pod.

It's a fair bet that the stage 1 will make good boost slightly earlier than this and the boost response will be less peaky.

Guest INASNT

Guest INASNT

Posted
Posted
I dont have a stage 1 but i have a stage two on RB20 with no tuning so you can atleast get an indication.

Mine starts to gradually build boost from about 3k, has 5psi by 4k, hits 7 by 4200 and then rockets to 11psi (i haven't upgraded fuel yet so am pegging it there at the moment) I have exhaust, cooler and pod.

It's a fair bet that the stage 1 will make good boost slightly earlier than this and the boost response will be less peaky.

Thats a very unresponsive turbo. I can get 1 bar by 4000rpm with a 600hp GT30 Garrett.

R33NT Collaborator

R33NT

Posted
  • Author
Posted

With regard to the GT3040 comment as i said is was told it was close to a GT3040 in one conversation and in a later conversation they said it was close to a GT3530???

BHDave how long ago was it that you got your stage 2?? Have you got a turbo from a RB25DET and bolted it to your RB20DET?? When i talked to GCG they said that the reason they didnt push the stage two is the reason yours is so laggy (i am guessing). They said as per SeriesIIGTST's post on page one that all those mods where necessary to get enough air flowing to booth spool the turbo and not restrict the flow of the air it is compressing otherwise it would be laggy.

BHDave Grand Master

BHDave

Posted
Posted

I got mine second hand and it was about 4months old at the time, probably closer to 7months old now. Came off an sr20 actually. I'd killed my turbo and it came up for a good price so i got it as a bit of a stop gap.

Id reckon they may also run into surge problems on the rb20 due to the engine not being able to flow as much as the rb25 though i haven't got to that stage yet. Gimme a couple of months.

Guest INASNT

Guest INASNT

Posted
Posted
With regard to the GT3040 comment as i said is was told it was close to a GT3040 in one conversation and in a later conversation they said it was close to a GT3530???

BHDave how long ago was it that you got your stage 2?? Have you got a turbo from a RB25DET and bolted it to your RB20DET?? When i talked to GCG they said that the reason they didnt push the stage two is the reason yours is so laggy (i am guessing). They said as per SeriesIIGTST's post on page one that all those mods where necessary to get enough air flowing to booth spool the turbo and not restrict the flow of the air it is compressing otherwise it would be laggy.

They will say anything to sell a product!! Have u seen the size of a 3040??? The stock turbo is half the size.

The high flow is so laggy coz u r still using the stock cast manifold which is a piece of shit!!

SLY33 Mentor

SLY33

Posted
Posted

but the highflow std turbo is still a pretty small turbo, i wouldnt think that the stock exhaust manifold is too bad for such a turbo. My 2530 is roughly equivalent in size to a highflow stock turbo, and there is pretty much no lag.

I can understand on big phat turbos like 3040's that an aftermarket exh manifold would help, but im not so sure its worth the money on small GT25's or highflow standards???

BHDave Grand Master

BHDave

Posted
Posted

I'm in agreement with Inasnt on the advantages of the A/M manifold.

Even on a small turbo the improved flow of the new manifold will give a reasonable gain.

Only problem with getting a decent manifold on an RB that I see is that the turbo will have to be moved from it's stock location in order to get a decent manifold in there so you will need custom oil & coolant lines, intake pipe and dump.

Not a huge problem, but enough of a pain in the arse that i'm leaving it for a while longer (it also has something to do with not having enough cash to do what i want when i want) :(

PHaT MR30 Grand Master

PHaT MR30

Posted
Posted

Which is why you port match the manifold to the head and the turbo and then have it power ported to remove the shit you cant get to. this drops the zorst temps down 40deg. having the exhaust housing done also help with efficiency.

watch the boost rise though!!!

sorry but i am a big believer in power porting

some ppl can't afford big turbos and A/M manifolds. been down that route.

They will say anything to sell a product!! Have u seen the size of a 3040??? The stock turbo is half the size.

The high flow is so laggy coz u r still using the stock cast manifold which is a piece of shit!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Rezz
      Spotted on the street....

      By Rezz · Posted

      Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...