Jump to content
SAU Community

Recommended Posts

Hello,

Car is back at home now so time to sell it off.

I would ideally like to sell the car as a whole but am willing to part out certain bits and pieces that are easy enough to deal with.

Car:

1999 R34 GTT Coupe - White

138XXXkms - Dash is gone so not sure on exact kms this is pretty close though

Automatic Trans (shift kitted)

Details: Car was stolen from me a couple of months back. was found partly stripped. no insurance was involved so car has not been written off. pretty much all of the interior is gone including window seals, carpets etc.

Main part of dash still remains along with the steering wheel and auto shifter/handbrake. Airbags not deployed etc.

All panels are still in excellent condition except the drivers door which has damage.

Motor and gearbox were in good condition for age, always serviced used mutol oils. unfortunately motor cannot be shown running due to the parts missing.

Parts missing:

Turbo

Dump

Intake

Coilpacks

Battery

Crossover pipe w/ Bov

Drivers Window

Passenger mirror glass

Headlights

Aftermarket parts still on car:

Greddy front mount intercooler

Greddy type S coilovers

Whiteline Adjustable swaybars (24mm front/20mm rear)

Rear adjustable camber arms

Hicas lock bar

Superpro adjustable castor bushes

Superpro subframe alignment kit

Nistune Ecu - (tuned to 194rwkw by EFI performance)

Walbro Fuel Pump

assorted new bushings

Viper alarm system (remotes stuffed)

Pics:

post-39016-0-07025900-1302952198_thumb.jpg post-39016-0-02256900-1302952225_thumb.jpg post-39016-0-64472500-1302952252_thumb.jpg

post-39016-0-32953100-1302952275_thumb.jpg post-39016-0-56480400-1302952297_thumb.jpg post-39016-0-20692200-1302952326_thumb.jpg

post-39016-0-38331700-1302952355_thumb.jpg post-39016-0-26221300-1302954586_thumb.jpg post-39016-0-38154700-1302954634_thumb.jpg

Price: not too sure to be honest so $4000ono it is. I am open to offers on whole car and parts.

Parts for sale:

Greddy Front mount intercooler -- $200

Greddy type s coilovers -- $1000

Whiteline Adjustable swaybars (24mm front/20mm rear) -- $150/$150

Nistune ECU -- $400

QFM HPX brake pads (front/rear) never used brand new - $120

post-39016-0-69850400-1302952644_thumb.jpg

CES 3" mild steel cat back (magnaflow muffler, twin 3" tips) good cond - $450

post-39016-0-77910200-1302952720_thumb.jpg post-39016-0-35085700-1302952747_thumb.jpg

R34 fibreglass/carbon boot (clear peeling in small corner area) -- $150

post-39016-0-19025100-1302952811_thumb.jpg

R34 Standard airbox and snorkel w/ K&N hiflow panel filter -- $100

post-39016-0-15595300-1302952870_thumb.jpg

R34 Standard Fuel pump with bracket -- $80

post-39016-0-98310600-1302952923_thumb.jpg

BM50 brake master cylinder (i never used, guy i bought it from said it had been rebuilt 10,000kms ago from an r32 gtr i think) -- $100

R34gtt Engine cover -- $50

post-39016-0-52067000-1302953018_thumb.jpg

Rb25det coilpack cover -- $30

R34 boot lining/carpet -- $60

post-39016-0-41705800-1302953100_thumb.jpg

R34 standard plastic front bar with indicators (trimmed to fit FMIC, some scuffs etc) -- $200

R34 JIC Coilovers - unsure on exact model, condition unknown - would suit rebuild -- $350

post-39016-0-86382300-1302953222_thumb.jpg

2x transmission/oil coolers - one is davies craig other is unknown -- $20ea

post-39016-0-61168700-1302953291_thumb.jpg

R34 guard lining -- $40

post-39016-0-00987800-1302953335_thumb.jpg

R34 window washer bottle -- $35

post-39016-0-54133800-1302953383_thumb.jpg

Drift oil catch can -- $20

post-39016-0-81849700-1302953447_thumb.jpg

Greddy Turbo timer (missing a plug from harness, could be wired up easy) - $50

post-39016-0-69082600-1302953505_thumb.jpg

R33 coupe bootlid with spoiler/struts/light (scratches) - $100

post-39016-0-82435600-1302953588_thumb.jpg

R33 front fenders w/ indicators (one cracked) scratches -- $50ea

post-39016-0-91026800-1302953648_thumb.jpg

R34 pink label AFM -- $120

post-39016-0-02541600-1302954374_thumb.jpg

pair of 17" SSR wheels - gold w/tyres - unsure of offset 17" multistud -- $300

post-39016-0-77112700-1302954193_thumb.jpg

Thats about it!

If there is something you are chasing let me know and we may be able to work something out.

all prices are negotiable and postage is a maybe depending on item would prefer pickup - make an offer!

Location: Brisbane Southside

Contact:

Steve - PM or reply

mobile/sms: 0422 850 698

Cheers!

email: stephen.hendicott (at) gmail.com

Link to comment
https://www.sau.com.au/forums/topic/361154-r34-gtt-partoutcomplete-sale/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

want to have a squiz at the car. may know someone that will take it as it sits.

(I have a 32 as you know and do not need another car.)

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

No worries, I have yet to pick the car up yet, but I've been looking for a white wing for it :yes:

Hey mate, sorry to hear about your loss. How would the FMIC go fitting up to a S15? (is it R34 specific or generic?) If its not taken let me know.

Again, sorry about your loss. Feel almost dirty buying things from you under this circumstance.

Don't feel sorry for wanting to buy stuff from me. Let's me get 'some' money back :)

Sorry the fmic is spoken for ATM. Don't think it would fit s15 though without new pipework

Let me know when you want to come have a look Chris.

Once chris has looked at it guys and I know what's happening there I'll get back to you in regards to pulling bits off. Obviously if someone takes the car they get first dibs on the bits that are still on it.

Cheers

strip it!

fellow does nto want to see it in the flesh. says there is too much missing to put it back together.

after to harmonic balance and crankshaft how much

Not parting the engine just yet. I don't have the time for it.

Hicas bar I'll try to get off in the next few days, I'll send you SMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...