Jump to content
SAU Community

Billet Turbo- Hks Manifold And A Heap More Good Gear.


Recommended Posts

I'm back from overseas and I'm cleaning out the shed to fund my TD06 requirments.

Precision Turbo- Billet comp wheel, PT5557 570hp turbo. Less than 1500km old, some dyno runs and a couple of gymkhana events. This turbo is currently on my rb25/R32 (some may have seen the set up in action at the DEC gymkhana event last year). The car is currntly making 250rwkw with more in it. Dyno sheet and or ride can be arranged.

Turbo- $1000

Wastegate- $350

Stock manifold wastegate adapter- $250

Package- $1400

post-22624-0-63658400-1303209517_thumb.jpg

post-22624-0-03745500-1303209656_thumb.jpg

Nismo 260km/h dash for R32 GTR- 87k kms on the clock. As far as I know it suits early 32's. $250

post-22624-0-09109500-1303210041_thumb.jpg

Generic JJR oil cooler kit- Used condition, but everything is there. $200

post-22624-0-17411500-1303210246_thumb.jpg

Twin td05 kit to suit rb26. Used condition. Manifolds are very well made (japanese) with no cracks. Turbos are in ok condition, minimal shaft play and thrust play. Comes with dump pipes. $1000

post-22624-0-37925200-1303210396_thumb.jpg

post-22624-0-37834000-1303210554_thumb.jpg

Genuine N1 oil pump- new in box. $350

post-22624-0-84154100-1303210692_thumb.jpg

Turbosmart FPR-800 fuel pressure regulator- used but in good condition, includes some fittings. $200

post-22624-0-07321000-1303210929_thumb.jpg

Turbosmart bleed valve- used. cheap. $50

post-22624-0-22865100-1303211102_thumb.jpg

Turbosmart V port blow off valve- used. also cheap. $75

post-22624-0-29833500-1303211211_thumb.jpg

VH45/Q45 V8 90mm throttle body- used but good condition. has no tps but your rb20/25 s1 will bolt straight on. also has coolant temp idle adjustment (cool!). $250

post-22624-0-36248100-1303211370_thumb.jpg

RB Flywheel- used, no cracks. $100

post-22624-0-61651300-1303211497_thumb.jpg

SPEC clutch plate- used. $50

post-22624-0-88796100-1303211716_thumb.jpg

HKS GT 2835- needs a rebuild and the housings are good. $350

post-22624-0-33445800-1303211879_thumb.jpg

RB26 conrods- straight and undamaged. $120

post-22624-0-23462500-1303212017_thumb.jpg

HKS cast low mount exhaust manifold- is don is good, but has a crack along the divider inside... I have had a quote for repair (correctly) for $150 by a cast material welding specialist. Rare item $450

post-22624-0-65273500-1303212260_thumb.jpg

post-22624-0-93086100-1303212384_thumb.jpg

HKS square base wastegate- has bolts, valve seat and gasket. $350

post-22624-0-24185400-1303212568_thumb.jpg

Trust rb26 pod adapters- good condition, needs polishing. $100

post-22624-0-45518600-1303212724_thumb.jpg

Intercooler- generic JJR. $100

post-22624-0-84005700-1303212852_thumb.jpg

Package deals can be made, all shipping will be additional (don't ask for shipping prices unless your very keen) and all parts can be inspected/picked up from south Tasmania- Hobart Area.

PM me here or call/sms 

Cheers

Justin

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

Edited by Ad's

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm keen on the hks mani , the jjr oil cooler kit and possibly the hks 2835 Are you free this weekend mate? :D

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

Sorry mate , i'm a little on the busy side today , maybe tonight? (no promises) you still down kingo??

Hey Toff, I'm in moooonah at the mo... I can come to you?

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

PM replied.

dont get a dirty truck turbo Justin. ;p

also one important bit of info is the HKS manifold T3 or T4?

ive still got thoes HPI mags next time your up this way.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Damm you & your low prices ill never sell my bov now :P

what size is the front mount?

Eassily solved by buying mine and sell both of them for more :P

standard- 600x300x76mm 3" outlets.

Hey Toff, I'm in moooonah at the mo... I can come to you?

PM replied.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hmmmm. i dont think s13 people like there engines being called forklift engines. haha

no SAU track day. both my 32s fail at moving under there own steam.

Hey Toff, I'm in moooonah at the mo... I can come to you?

Cheers

Justin

Sorry mate , i was in moonah , my work sux atm because i don't know which one ill be at between every hour , tonights not looking good either sorry mate , no need to hold it for me or anything though , if it sells it's tuff luck for me :) , pm me your mobile mate , if your in moonah-ish tomorrow i'll try catch up around my lunch break :) cheerio

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hi, just to clarify - is the HKS manifold a T4 manifold for an RB25?

yes is T4 flange... most people just re-drill and tap them for t3- as i was going to do,,, there is heeeaps of material around the flange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...