Jump to content
SAU Community

Billet Turbo- Hks Manifold And A Heap More Good Gear.


Recommended Posts

I'm back from overseas and I'm cleaning out the shed to fund my TD06 requirments.

Precision Turbo- Billet comp wheel, PT5557 570hp turbo. Less than 1500km old, some dyno runs and a couple of gymkhana events. This turbo is currently on my rb25/R32 (some may have seen the set up in action at the DEC gymkhana event last year). The car is currntly making 250rwkw with more in it. Dyno sheet and or ride can be arranged.

Turbo- $1000

Wastegate- $350

Stock manifold wastegate adapter- $250

Package- $1400

post-22624-0-63658400-1303209517_thumb.jpg

post-22624-0-03745500-1303209656_thumb.jpg

Nismo 260km/h dash for R32 GTR- 87k kms on the clock. As far as I know it suits early 32's. $250

post-22624-0-09109500-1303210041_thumb.jpg

Generic JJR oil cooler kit- Used condition, but everything is there. $200

post-22624-0-17411500-1303210246_thumb.jpg

Twin td05 kit to suit rb26. Used condition. Manifolds are very well made (japanese) with no cracks. Turbos are in ok condition, minimal shaft play and thrust play. Comes with dump pipes. $1000

post-22624-0-37925200-1303210396_thumb.jpg

post-22624-0-37834000-1303210554_thumb.jpg

Genuine N1 oil pump- new in box. $350

post-22624-0-84154100-1303210692_thumb.jpg

Turbosmart FPR-800 fuel pressure regulator- used but in good condition, includes some fittings. $200

post-22624-0-07321000-1303210929_thumb.jpg

Turbosmart bleed valve- used. cheap. $50

post-22624-0-22865100-1303211102_thumb.jpg

Turbosmart V port blow off valve- used. also cheap. $75

post-22624-0-29833500-1303211211_thumb.jpg

VH45/Q45 V8 90mm throttle body- used but good condition. has no tps but your rb20/25 s1 will bolt straight on. also has coolant temp idle adjustment (cool!). $250

post-22624-0-36248100-1303211370_thumb.jpg

RB Flywheel- used, no cracks. $100

post-22624-0-61651300-1303211497_thumb.jpg

SPEC clutch plate- used. $50

post-22624-0-88796100-1303211716_thumb.jpg

HKS GT 2835- needs a rebuild and the housings are good. $350

post-22624-0-33445800-1303211879_thumb.jpg

RB26 conrods- straight and undamaged. $120

post-22624-0-23462500-1303212017_thumb.jpg

HKS cast low mount exhaust manifold- is don is good, but has a crack along the divider inside... I have had a quote for repair (correctly) for $150 by a cast material welding specialist. Rare item $450

post-22624-0-65273500-1303212260_thumb.jpg

post-22624-0-93086100-1303212384_thumb.jpg

HKS square base wastegate- has bolts, valve seat and gasket. $350

post-22624-0-24185400-1303212568_thumb.jpg

Trust rb26 pod adapters- good condition, needs polishing. $100

post-22624-0-45518600-1303212724_thumb.jpg

Intercooler- generic JJR. $100

post-22624-0-84005700-1303212852_thumb.jpg

Package deals can be made, all shipping will be additional (don't ask for shipping prices unless your very keen) and all parts can be inspected/picked up from south Tasmania- Hobart Area.

PM me here or call/sms 

Cheers

Justin

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

Edited by Ad's

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm keen on the hks mani , the jjr oil cooler kit and possibly the hks 2835 Are you free this weekend mate? :D

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

Sorry mate , i'm a little on the busy side today , maybe tonight? (no promises) you still down kingo??

Hey Toff, I'm in moooonah at the mo... I can come to you?

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

PM replied.

dont get a dirty truck turbo Justin. ;p

also one important bit of info is the HKS manifold T3 or T4?

ive still got thoes HPI mags next time your up this way.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Damm you & your low prices ill never sell my bov now :P

what size is the front mount?

Eassily solved by buying mine and sell both of them for more :P

standard- 600x300x76mm 3" outlets.

Hey Toff, I'm in moooonah at the mo... I can come to you?

PM replied.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hmmmm. i dont think s13 people like there engines being called forklift engines. haha

no SAU track day. both my 32s fail at moving under there own steam.

Hey Toff, I'm in moooonah at the mo... I can come to you?

Cheers

Justin

Sorry mate , i was in moonah , my work sux atm because i don't know which one ill be at between every hour , tonights not looking good either sorry mate , no need to hold it for me or anything though , if it sells it's tuff luck for me :) , pm me your mobile mate , if your in moonah-ish tomorrow i'll try catch up around my lunch break :) cheerio

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hi, just to clarify - is the HKS manifold a T4 manifold for an RB25?

yes is T4 flange... most people just re-drill and tap them for t3- as i was going to do,,, there is heeeaps of material around the flange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...