Jump to content
SAU Community

Recommended Posts

I'm back from overseas and I'm cleaning out the shed to fund my TD06 requirments.

Precision Turbo- Billet comp wheel, PT5557 570hp turbo. Less than 1500km old, some dyno runs and a couple of gymkhana events. This turbo is currently on my rb25/R32 (some may have seen the set up in action at the DEC gymkhana event last year). The car is currntly making 250rwkw with more in it. Dyno sheet and or ride can be arranged.

Turbo- $1000

Wastegate- $350

Stock manifold wastegate adapter- $250

Package- $1400

post-22624-0-11326300-1303213794_thumb.jpg

post-22624-0-52439400-1303213928_thumb.jpg

Nismo 260km/h dash for R32 GTR- 87k kms on the clock. As far as I know it suits early 32's. $250

post-22624-0-87744400-1303214182_thumb.jpg

Generic JJR oil cooler kit- Used condition, but everything is there. $200

post-22624-0-11087000-1303214491_thumb.jpg

Twin td05 kit to suit rb26. Used condition. Manifolds are very well made (japanese) with no cracks. Turbos are in ok condition, minimal shaft play and thrust play. Comes with dump pipes. $1000

post-22624-0-39624000-1303214821_thumb.jpg

post-22624-0-44187700-1303215920_thumb.jpg

Genuine N1 oil pump- new in box. $350

post-22624-0-24168300-1303216067_thumb.jpg

Turbosmart FPR-800 fuel pressure regulator- used but in good condition, includes some fittings. $200

post-22624-0-52879400-1303216490_thumb.jpg

Turbosmart bleed valve- used. cheap. $50

post-22624-0-83061100-1303216172_thumb.jpg

Turbosmart V port blow off valve- used. also cheap. $75

post-22624-0-01295100-1303216251_thumb.jpg

VH45/Q45 V8 90mm throttle body- used but good condition. has no tps but your rb20/25 s1 will bolt straight on. also has coolant temp idle adjustment (cool!). $250

post-22624-0-64101200-1303217339_thumb.jpg

post-22624-0-43772400-1303217462_thumb.jpg

RB Flywheel- used, no cracks. $100

post-22624-0-96239200-1303217572_thumb.jpg

SPEC clutch plate- used. $50

post-22624-0-05424200-1303217925_thumb.jpg

HKS GT 2835- needs a rebuild and the housings are good. $350

post-22624-0-92804700-1303216658_thumb.jpg

post-22624-0-05105700-1303216786_thumb.jpg

RB26 conrods- straight and undamaged. $120

post-22624-0-68668200-1303217680_thumb.jpg

HKS cast low mount exhaust manifold- is don is good, but has a crack along the divider inside... I have had a quote for repair (correctly) for $150 by a cast material welding specialist. Rare item $450

post-22624-0-36837300-1303216891_thumb.jpg

post-22624-0-68263500-1303217004_thumb.jpg

HKS square base wastegate- has bolts, valve seat and gasket. $350

post-22624-0-32401900-1303217109_thumb.jpg

Trust rb26 pod adapters- good condition, needs polishing. $100

post-22624-0-60123800-1303218029_thumb.jpg

Intercooler- generic JJR. $100

post-22624-0-82333200-1303217216_thumb.jpg

Package deals can be made, all shipping will be additional (don't ask for shipping prices unless your very keen) and all parts can be inspected/picked up from south Tasmania- Hobart Area.

PM me here or call/sms 

Cheers

Justin

post-22624-0-42423000-1303216371_thumb.jpg

Cooler sold to me :cheers:

If you are interested in selling that intake pipe in your first Rb25 picture, let me know. Or tell me, is it custom made or bought? If so how much and where from? Maybe you can PM me a pic of your intake system(infront of the turbo)?

Edited by SargeRX8

Sorry the intake pipe isn't for sale... it's just a 90 deg cast trust pipe and a 90 deg alloy bend... there's no provision for bov return or breather intake.

Cheers

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...