Jump to content
SAU Community

Recommended Posts

hey guys,

So begins my a long journey to be. I was looking around for a r32 for a while as i had had enough of my e30 bmw and it's never ending issues. Saw this come up on carsales one morning and jumped on it 155000 genuine kms, apexi catback with muffler removed, Tein Super Streets, Volk Gtp's, Greddy turbo timer, Gay raceboi momo steering wheel, Cooling pro front mount, hks pod filter, Super cold A/C, Nismo 550cc injectors, gfb valve which i believe is leaking, Picked it up for the handsome sum of $6000 with 6 months rwc and rego, I drove it up from Brisbane Easter sunday.

Man what a trip dropped into limp home mode twice and popped a front tyre. Got home and found 3 boost clamps loose. So fitted 3 new ones and bolted down the hard pipe. While i was looking around found the fuel pump regulator hose was off so there was another boost leak, the charcoal canister lines were also not bolted up. Previous owner was a pilot in training and had no mechanical idea!!!! Car was bogging down from time to time so i pulled the afm and cleaned it and no more limp home mode YAY!!! Car still bogs down from time to time when going from full throttle to part so i'm thinking bov is leaking. So far im loving it. Fitted 2 new 215/45/17 eagle f1's to the front since i had to replace the popped one with a 235 and it was rubbing. So anyway ON WITH THE PICS

IMG_0403.jpg

IMG_0386.jpg

IMG_0393.jpg

IMG_0398.jpg

IMG_0399.jpg

IMG_0401.jpg

Link to comment
https://www.sau.com.au/forums/topic/362853-r32-project-streettrack/
Share on other sites

Yeah mate enjoying it so far. Got a few mods planned, getting rid of the hks pod and gettng a apexi dual intake with a cai box. Full service, new pads, new rotors, stainless lines, new coil packs, ebc, new bov, new front pipe/high flow cat and wideband.

Edited by beemae30
  • 2 weeks later...

IMG_0405.jpg

Resoldered the afm joints today.... Definetly reccomend it to everyone made a heap of difference. Also stripped the bov wet n dryed it and re lubed it. Helped with the fluttering. Gave it a service with some motul 8100 excess as the old oil was FILTH. New fuel filter and all new fuel hoses. Covered the cross pipe over the radiator with reflective heat tape from work. Don't notice a difference but cleans it up as the old one was tarnished.

Edited by beemae30

Found my cooler was rubbing on my front bar from the shit install job the P/O did. When i pulled it off and had a look i found a lovely suprise. Cooling Pro Coolers ARE SHIT.

IMG_0443.jpg Don't know how u dint an inner fin like that but they did it.

IMG_0442.jpg It leaks oh well solder it up.

IMG_0440.jpg Score 550 yen

IMG_0438.jpg

IMG_0436.jpg This stuff is awesome

IMG_0435.jpg Awesome tyre fitters

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...